Complex global totals hurt when filtering server

Similar Questions

• Hit to the broad area when the server is connected to the internet

  We have a new server running windows standard server 2008R2. When the server is connected to the internet, the computers on the domain are faced with offshore and they receive the error message saying "Unable to connect to the database". How we solve this problem?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• password by default when the server is inaccessible

  Hi, I recently configured AAA. When the server is running everything is fine, but when the server is inaccessible, I'm locked up. How can I put on a default user name and password when the server is inaccessible

  Thank you

  James

  There are several ways to configure AAA so that you are not locked if the server is not available. You can use a username that is configured locally, as you suggest here, or you can use the configured line passwords.

  To use a locally configured user your configuration might look like this:

  rick user password Cisco

  AAA authentication login default group Ganymede + local

  Or, to use the online passwords as a backup of your config might look like this:

  AAA authentication login default group Ganymede + line

  You also probably need a backup to access the privilege mode. This is done usually by using the configured locally enable secret. To do this configuration might look like this:

  the AAA authentication enable default group Ganymede + activate

  HTH

  Rick

• error when running server administrator

  Hi friends,

  I have a problem when admin server running in my system. I have attached the the shoot of screen of the error occurs. Can someone help me solve this problem. My mail id [email protected]

  the following blog gave the solution for the problem mentioned above

  https://blogs.Oracle.com/christomkins/entry/soa_suite_11g_unable_to_start

• FRM-92101: there was a failure when starting Server Forms... (R12 charge installation on windows server 2008 32-bit)

  Hello

  I encountered the following error when I try to open the form in oracle EBS R12.1.1

  It stuck for a little while and then appears an error message

  FRM-92101: there was a failure when starting Server Forms...

  (I've never been able to run the form on this)

  I ran a vision online forum that works very well which means java is ok.

  It is the new installation on windows server 2008 32-bit with costs of database (no vision).

  I search on the internet and tested all of the available options, including;

  change in the registry for example 1024,12288,1024 etc.

  marking the check box for oracle process manager to PROD "allow service to interact with desktop".

  check the configuration files of forms (all files of any bad path that I found and corrected)

  running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log

  I'm not a technical professional and unable to solve the problem, please help

  Problem solved

• Hello, I just want to know, if I take my annual subscription, will I be charged again for the annual total again when I restart it?

  Hello, I just want to know, if I take my annual subscription, will I be charged again for the annual total again when I restart it?

  If there is no outstanding amount while this amount will be charged if the CC is turned on.

  Concerning

  Baudier

• How to set up the database restarts automatically when the server starts?

  Hello
  
  What is involved if I configure Oracle database starts automatically when the server is started/restarted?
  
  I guess that change the following entry in/etc/oratab
  

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:N

  TO

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:Y

  is not sufficient - there is more than that. But what is it?
  
  We can also configure the listener to automatically re / start?
  
  I guess that everything what is the solution, it will also apply to Oracle 11 GR 2 databases/ASM - right?
  
  The platform is Redhat Linux 64 bit (version 4.7 & v5.9).
  
  Thanks in advance!
  
  Best regards

  Hello

  Below is one example of autostart services database and the listener.

  1 > make/etc/oratab file entry Y as:
  ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

  2 > create a file called "/ etc/rc.d/init.d/oracle" as root, containing the following.
  --------------------------------------
  #! / bin/sh
  # chkconfig: 345 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Define ORA_HOME as equivalent to the $ORACLE_HOME
  # from which you want to run dbstart and dbshut;
  #
  # Define ORA_OWNER to the userid of the owner of the
  # Oracle in ORA_HOME server.

  ORA_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  ORA_OWNER = oracle

  If [! f $ORA_HOME/bin/dbstart]
  then
  echo "Oracle startup: cannot start.
  output
  FI

  case '$1' in
  'Start')
  # Run Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
  known - $ORA_OWNER - c $ORA_HOME/bin/dbstart
  ;;
  'stop')
  # Stop the Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c $ORA_HOME/bin/dbshut
  known - $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
  ;;
  ESAC
  -------------------------------------------------

  3 > use the chmod command to set privileges to 755.
  chmod 755 /etc/rc.d/init.d/oracle

  4 > associate the appropriate oracle service run levels and set it to auto-start by using the following command.
  chkconfig--level 345 oracle on

  Note:-back, I've done this for a long time... Please check the dbstart use pfile or spfile to start the database instance.
  Thank you

• Exception when starting Server EMGC_OMS1 (updated 12.1.0.2)

  Hello
  
  I just upgraded my EM 12 c R1 to R2 test environment.
  The environment runs on Windows: Server Admin and monitor targets.
  
  After the steps after installation in the migration guide, Weblogic console starts well (using % DOMAIN_HOME%\startWebLogic.cmd), but I'm having trouble to start Enterprise Manager Cloud Control console/web server.
  
  After trying to start the EMGC_OMS1 managed server in WebLogic console, I get the following:
  
  -EMGC_OMS1 State goes to FAILED_NOT_RESTARTABLE.
  -The Server Admin log show the following errors:
  

  14:33:05EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:05 CEST > < WARNING > < DeploymentService > < BEA-290014 > < username or password. >
  14:33:07EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:07 CEST > < error > < Configuration Management > < BEA-150035 > < an attempt was made to download the configuration for > EMGC_OMS1 server by the user with an invalid password. >
  < 28 sep 2012 14:33:13 CEST > < error > < NodeManager > < BEA-300048 > < could not start the server EMGC_OMS1: Exception when starting Server > "EMGC_OMS1" >

  I tried the following:
  
  -Write file boot.properties in %DOMAIN_HOME%\servers\EMGC_ADMINSERVER\security and %DOMAIN_HOME%\servers\EMGC_OMS1\security with the credentials for the user the Weblogic admin again.
  -Value username and password on "Parameters of EMGC_OMS1" > Configuration > Weblogic Console tab to start the server.
  
  None of them succeeded.
  
  I also compared the former (R1) installation folder with a new one for the R2, but I don't see any relevant difference.
  
  You have suggestions on what can be wrong?
  
  Thanks in advance,
  Angel

  Hi Angel,

  Please see the following doc for instructions on starting a CMS.

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/emctl.htm#BABFEEAJ

  Kind regards
  -Loc

• Problem when running server SOA

  Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
  
  12 characters do not match "Expressions of folklore <>" expected "" "
  TForm is running and is accepting applications
  12 characters do not match "Expressions of folklore <>" expected "" "
  
  When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
  
  Could you help me? If I'm going to write more information.
  
  Thanks in advance
  
  Edited by: 948093 2012-07-23 06:07

  Hello

  It seems that when you call after a command.

  startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

  try this way.

  soa_server1 startManagedWebLogic.sh T3: / / :

  Make sure you gave Admin Server port or not.

  Check your config file to check the port and IP address or correct.

  Kind regards
  Kal

• Restart the scheduled task when the server is restarted

  Hi all
  
  I have a work planned and executed through Service Center control. Then, the server has a regular job of system which restarts every week.
  
  I would like to know what is happening with this scheduled task when the server is restarted. I understand that I must again manually lunch at work.
  
  Anyone know what is the easiest way to automate a task that starts the task OWB?
  
  Thank you very much in advance for your help.
  
  Concerning
  Victor.

  Hi Victor,

  I understand that I must again manually lunch at work.

  you don't need lunch again job - OWB.
  Employment in the Oracle database still in State SCHEDULED after restart of the database.
  It is a problem of OWB, she had lost the synchronization status of a task planned with Oracle database

  Kind regards
  Oleg

• Server 2008 r2 domain through IP locations & Internet Connectivity when domain server (internet down instead)

  Sorry for the long title: p

  I recently picked up a non-profit operations in the city with offices in three locations in the city.

  We have a network domain server and exchange server at the main office where I work, and the computers in the other two offices are on the field.

  (I guess that VPN configurations in our routers keep everything connected, but maybe I'm wrong on this issue..)

  My problem is that when the internet at the office of the admin (where the servers are) breaks down, desktop to other locations have DNS problems and cannot connect to internet... and personal devices connected to WiFi that I provide to these places are struggling as well, being able to access only certain sites and sometimes no access at all.

  I think many computers to assign IP addresses, although I have added computers I have built and/or formatted and installed myself that work very well on the field.

  Why computers to the other localities are struggling to DNS and impossible to connect to the internet when the domain server is offline? What can I do to change this? I want our employees to always have internet access if the servers log.

  (Being a non-profit in this city it is the COMPUTER with most of the companies not having budget do not)

  The problem was the result of a secondary DNS server is not located in the router from the same place. My computer guy said Comcast as the secondary where the main DNS (my domain controller) server is not available... problem solved :)

• Launch Global event listener when auto start MyApp

  What I was trying to do:

  MyApp has an alternative entry point and the graphical user interface.

  access to choice, I wanto save a folderlistener that triggers a global event to trigger an email sending process.

  so far, I've only had the entire process running only if I join the global event listener in the GUI part, it means when myapp GUI stood then go global Stanley knitted.

  but I want Global event listener remains all the time, how can I do this?

  I did some research in this Ant but just couldn't understand it

  any responses appreciated.

  my code:

  ============================================

  SerializableAttribute public class MyApp extends UiApplication implements FieldChangeListener, GlobalEventListener
  {

  Public Shared Sub main (String [] args) throws AddressException, ClassNotFoundException
  {
  MyApp PAP;
  If (args! = null & args.length > 0) {}
  {If (args.length > 0 & {args [0].equals("Auto-MyApp")})}
            
  Entered another application by the entry point.
  Turn on folderlistener at startup.
  FolderListenerApp.waitForSingleton ();
             
  }
  else {}
  PAP = new MyApp();
  theApp.enterEventDispatcher ();
  }
       
  }

  private void AddGlobalEvent() {}
  addGlobalEventListener ((GlobalEventListener) this);
  }

  Public MyApp() throws AddressException, ClassNotFoundException
  {
         
  ........

  AddGlobalEvent();
         
         
  ........
         
     
  }

  ' Public Sub eventOccurred (guid long data0 int, int data1, the object object0,)
  Object1 object) {}
         
  Logger.logEventError ("in eventOccurred...");
  Is it the GlobalEvent we expect?
            
  If (guid is 0xa4c7e78a6c3fe109L)
  {
  Yes.

  FolderListenerAction f = new FolderListenerAction();
  New Thread (fa) m:System.NET.HttpListener.start ();
  }
         
  }

  }

  ==================================

  Check out this tutorial that I posted earlier, it shows an application that is divided into a background process (extends the Application and begins when the operating system starts) and a process of foregroud/AC (extends UiApplication).

  Both are implementing GlobalEventListener and use it to talk with them

  http://supportforums.BlackBerry.com/T5/Java-development/tutorial-communicate-between-apps-processes/...

  Scroll down to the post on that date "2010-06-19 23:22"to the GET, the corrected version of the code.

• http using aaa authentication when Ganymede server is down

  I installed AAA using Ganymede and everything works well except for authentication http through a browser or a network Assistant when the RADIUS server is down. For console and telnet connections, the default authentication line when Ganymede is out of service.

  AAA new-model

  AAA authentication login default group Ganymede + line

  AAA authorization exec default group Ganymede + authenticated if

  AAA accounting update newinfo

  AAA accounting exec default start-stop Ganymede group.

  only AAA 0 default stop accounting controls group Ganymede +.

  only AAA 1 default stop accounting controls group Ganymede +.

  accounting AAA commands default 15 stop only Ganymede group.

  !

  aaa IP http authentication

  !

  radius-server host 10.161.161.20

  111111 radius-server key

  It must be something with the fact that on http or ANC, it connects to the router at level 15, but I have played with all sorts of orders of different authorization and cannot operate.

  Paul

  What you want to do for authentication if the RADIUS server is down? For telnet and console access you can use the line as a backup method because it is possible to configure a password for the line on the console and vty ports. Which type of backup method you want for HTTP? The one that seems most logical to me would be to a local authentication in order to cover the situation where the server is down.

  To use local authentication, you must do the following:

  -create a definition of the local user (maybe more if you need extended security).

  -specify a special method for authentication of the aaa.

  -specify that http, using the special method.

  The configuration might look like this:

  password user tech1 tech1

  AAA authentication login http_auth group Ganymede + local

  IP http authentication aaa - authentication of the connection http_auth

  Or you can decide to use the secret to activate (or password that is configured in office). The config might look like this:

  AAA authentication login http_auth group Ganymede + activate

  IP http authentication aaa - authentication of the connection http_auth

  If you want a different backup method, let us know what it is and we'll see how it could be implemented.

  HTH

  Rick

• Manage data source except when starting server in weblogic

  Hello

  I have weblogic 10.3.6, and I set datasource and deploy the application, the problem is when the datasource will not connect to the database, for example if the weblogic Server DB will be status "ADMIN" rather that "RUN", how do I manipulate datasource exception when start weblogic server

  Thank you

  OK, try this:

  'Set the InitialCapacity from the DataSource to 0 (zero) so that weblogic will not try to create any object of JDBC connection initially towards up so time like this that we can avoid the connection failed to create the conditions and prevent any movement of our State of the ADMIN server'

  WebLogic Server is in the ADMIN? "Middleware Magic."

  Kind regards

  White

• VMView is no longer communicate when saw server is moved in Active Directory

  Here's what I use in:

  My current view server is in our workstations container in Active Directory. However, I have to move to our container of servers due to compliance. I cloned for test. In my server VM to work that I can communicate with thin clients without any problem, in that in the servers container I can't communicate inside or outside.

  I check services.msc both on the workstation VMWare View services begin to the Script Host all. In the non-working VDMDS environment and the Services only start tool. I even put them all to auto start, but they still will not auto-start. Even when I start services I still don't no connection. The firewall is off and remote desktop is enabled. There are no programs using port 80 or port 443.

  Any ideas?

  To clone a member of the AD server is probably a bad idea because it will break windows security and makes probably the view-services won't start do not.

  I don't think that moving the server see in the ad should influence and services unless there is some new air applied to this OU as firewall rules or something.

  To test this, create a new connection to the server, a replica to the correct (new) and test that it works correctly.

  When testing is done point the DNS to the new replica, and then move the old one.

  Linjo