Compression problem

Similar Questions

• A99 problems, needs an Urgent Firmware update!

  while making sure, you are aware of that:

  There is a problem of disappeared with the a99 and video vg900:

  Take a look at the dpreview forum and other clients

  many have returned the camera back because of this problem

  so it's worth to check and give a quick solution

  It's probably a codec/compression problem

  Here are a few quotes from the Forum

  can be very restrictive pass filter or done something another twisted with 24 to 2 megapixels to the bottom of the video conversion

  SteadyShot & auto focus video done a few questions

  AF mode - D do not work in video mode, also something small in the continue autofocus in video mode

  some problems of aliasing and moire in video

  NEX-VG900 has the same problems of video

  When it is connected to ninja 2 these questions have disappeared

  but the only problem is that atomos ninja 2 supports only 1080i not 1080 p at 60 fps

  so that means when I turned the slow movement, I have to settle for the camera video

  problems with the video resolution (as well as micro-begaiement with AF on). The moiré and aliasing is much worse than the a77 and there is a general lack of detail and sharpness.

  None of these things occur in stills mode, if however the camera down - converts image (line jumping, binning, whatever) has a serious flaw and I hope Sony can fix that.

  also people are disappointed that the hdmi output is 8 and not 10 bits

  Anyway, please correct that as soon as possible.

  many people are confused about the purchase of this camera

  because of this problem.

  the camera has a great potential and takes great stills

  I want to see that it takes great videos too

  Thank you

  Note to Sony: it's scary.  I recently bought an A99, and I can see the value of my investment deteriorate before my eyes because of the video problem.

  The A99 motorway is a great camera.  I'll post an Amazon review that will notice little still-photograph of magic that even your own people do not seem to have discovered.

  You have chosen to ignore the countless complaints the wrong balance of sharpness and noise processing in the A900, and bash people yet a sound performance of the device.  The video problem is even more serious.  It needs to be fixed yesterday!  Your loyal customers are countiing on you.  You cannot afford to let us down again.

  Cheesy Tim

• Consistent black dots on printed

  Hi guys,.

  I use the HP Laserjet Pro 200 m251nw.

  The problem is that I get those black dots on the print in consistent locations on the image. I tried everything I could think of to ease the problem. I changed the type of paper to take into account that I use (brilliant (120g) and printed out several pages of cleaning on transparencies without result. I thought maybe it was a problem of compression on the wireless, so I downloaded the images on a USB and tried to print it that way, but still no luck.

  It makes me crazy!

  I scanned the sheet so that those of you who know a thing or two can see the problem firsthand... This is one of the better ones. For some reason any it prints very well on the last two rows now.

  Help! Please, I beg you! I'm losing my mind!

  

  So, I thought about it.

  The images were 600ppp JPEG because I thought that's what this printer was estimated to be. The consistency of the points made me think it was a compression problem... After abandoning their up to 420 dpi points have disappeared and it is printing very well.

  Come on me, I'm awesome. So, any 600 dpi for this thing. Wigs it.

• BlackBerry smartphones abandon the Roxio software? Is mass storage the best method for transferring multimedia files

  Should I give up on Roxio software and rely solely on the method of mass storage to transfer media files?

  I reinstalled several times the software, but whenever I try to use the Roxio Media Manager on my PC max CPU usage of on 100% and dies. Once, he worked - and as posted here by someone else, it seem very good - but each others times it just hangs.

  After reading now widely through this site and several others, it seems there are serious issues with Roxio. So my question for those of you with BB9000 more time under your belt: do I persevere with Roxio or give up and just rely on mass storage? It looks not pretty, but I moved ringtones, video and photographs around smoothly.

  Am I losing on the compression features in Roxio which I don't get mass storage? If this isn't the case, then my inclination is going to be drop Roxio and stick with mass memory until they fix the bugs or I see on this site a better way.

  Thanks to bifocals. I used the MediaSync before and Yes you are right, this works very well for the music. I was hoping to use the Roxio to transfer (and compression) files of images, photos digital high resolution of small files just for occasional display on the BlackBerry. Œuvres drag / move, but I cannot copy a lot of pictures. Not sure if it is a compression problem or if I just need a bigger memory card? I'll keep experimenting. I hope BB/Roxio will receive enough complaints sort...

  Thanks for the reply. Happy ' 09.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• Compressed file (zipped problem)! Failed to open due to the "open with..." function. "do not set correctly.

  I'm having a problem with compressed (zipped) folders. I'm unable to create brand new. Maybe it's because the function "open with...". "for compressed (zipped) folders is not set correctly, they still appear as programs Adobe instead of compressed files, which makes them unable to open or run. How can I use "open with...". "to open the files compressed as compressed folders? I'd appreciate any help I can get. Thank you.

  File association fixes MVP Ramesh - includes .zip
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html MS - MVP - Elephant Boy computers - don't panic!

• How to solve the problem named 'NTLDR IS COMPRESS' in the Windows 7 operating system

  There is an error message named "NTLDR IS COMPRESS" when starting my computer.

  There is an error message named "NTLDR IS COMPRESS" when starting my computer.

  you need to find a DVD of windows 7 and connect to the cmd recovery console...
  That's how
  http://www.bleepingcomputer.com/tutorials/Windows-7-recovery-environment-command-prompt/

  in the command prompt type this

  cd \ Attrib - c c:\ntldr

  By chance you have installed windows xp in dual boot? In windows 7 there bootmgr

  And perform a recovery to start in windows 7
  http://www.howtogeek.com/HOWTO/32523/how-to-manually-repair-Windows-7-boot-loader-problems/

• Games do not work once windows clean install. Also a problem with compressed files.

  After the reinstallation, games (fifa 12, black ops are those I've tried). they display some lack file d3dx9_35 something like dat. Also the compressed files are not extacting... says format d is not taken in charge or something.

  Please let me know if something was wrong with the d resettlement or do I hv to install missing components.
  Thanks for any help provided.

  seems like it was a problem of dx. Works great after a download of dx9. Thanks anyway.

• How can I correct a problem of compression/decompression for songs in Photoshop elements 9 slide show?

  When I try to add music to my slide show of Adobe Photoshop Elements 9, for some of my latest songs, I get the message "the selected file cannot be read because your system does not need to Compress / decompress (codec) installed.  How can I fix the song?  It is not a zip file, it's an mp3 player.  For the songs, I had some time, I have no problem adding them to my slide show.  I have a 10 Windows PC and I use Adobe Photoshop Elements 9 and Prime Elements 9.

  This is often because of the DRM (digital rights management) or other copyright issues. You can try to convert the MP3 file to a different format such as wav or wma. Otherwise, choose a track without integrated protection device.

  Error when you import an audio file protected against copying in Adobe products

• Problem of compressing files

  Hi all

  I'm having a problem of compression of strange file with CS5 on our new Mac Pro.  We bought the Mac Pro to scan and process the images, but the JPEG and GIF files we create from this computer is much more important that they should be closed (for example images that should be compressed to 6 KB read 60 KB and the size of the file is often smaller when open to closed). In addition, every time we use these image files in other programs (e.g., Filemaker Pro) the inflated file size will be.  What is even more amazing, is that the same files that read like 60KO on our Mac Pro will be correctly read as 6 KB from a PC.  Similarly, if we incorporate these images - which were created on the Mac Pro - in Filemaker from a PC, the size of the image file is correct.  We cannot use the compressed files, we create on our Mac Pro because the inflated file size will affect any application that we use on the Mac Pro (except Photoshop).

  We have been processing images on a PC for years and have not had any problems with this.   We thought for a while that the problem was with the Mac operating system, but after many calls with advisers from Apple, it seems that Photoshop for Mac has the issue.  We have already tried to reformat and re-indexing the hard drive, and at this point, there is nothing else that can be done at the end of Apple.  The expert last I talked to Apple says that this looks like Photoshop for Mac compress files and how Mac reads the files size is very different from the way of Photoshop for PC compress files and how Windows reads the size of the files.  Is it was okay, and there is no work around, we will have no choice and will have to return our Mac.

  Everyone knows that before?  Apple experts have been completely confused by the problem and we also.

  Thank you
  Jenny

  This has nothing to do with compression.

  Macintosh records more metadata and previews more than Windows - it is a part.

  Macintosh displays the size of the file on the disk, including the space wasted due to the size of the disk block - that belongs to another. (Look at the number of bytes, not the size in KB or MB).

  When you upload files to a server, or use them in most programs, this additional metadata is lost and the size of the files must be identical.

  I can't believe that your advisers spent time on an issue as trivial...

• Final movie is too big/problem with compression

  Hi everyone :)

  I have a little problem with the film I work with, I know this question may seem silly, but I'm not an expert in the making of films...

  I started with a hd video import (file size: 160 MB) to my Premiere Pro CS3.

  I worked with her a little, nothing fancy just a few added effects.

  So when I tried to export it, I get like 560 mb file. It's too much, because I am interested in getting into the 40, 50 MB or even less.

  I tried some different compressors, once again, I'm in 3, 4 GB (lol) but never less than 500 MB...

  Here are the settings that are available and give me a 500 MB file:

  
  file type: microsoft dv avi
  compressor: DV PAL
  frame rate: 25 fps
  format of the pixels: PAL D1/DV widescreen 16:9 (1.422)
  -Compress: maintain the data rate

  Could someone help me with my problem?

  See you soon

  Joachim

  He works in CS3, Harm.

  Quite honestly, Joachinm, Premiere Pro can be too much for this work.  Try a Publisher consumer who will directly manage your camera media.

• Compression SSL Web service problem

  I'm trying to consume a .NET web service in ColdFusion via SSL, and I have serious problems. I know that the URL is correct, because I can navigate through the WSDL file using my browser. Errors and my research, it seems that the problem might involve http compression on the server hosting the web service. I saw a few alternatives for CFHTTP using custom HTTP headers, but I wasn't able to find a way to get something to work with a web service call. Any ideas? ColdFusion only incompatible with webservices using HTTP compression?
  
  Here is the summary of the problems:
  
  (1) I can't save the WebService in CF administrator - when I try, I get the error:
  Service web creation by mistake. Please ensure that you have entered a Web Service name or the correct URL.
  
  (2) when I try to consume the web service in the CF, I get the following error:
  Could not generate objects stub for the call to the web service.
  Name: https://www.travelinsured.com/TIWebServiceQA/service.asmx?wsdl. WSDL: https://www.travelinsured.com/TIWebServiceQA/service.asmx?wsdl. java.util.zip.ZipException: unknown compression method It is recommended that you use a web browser to retrieve and examine the requested WSDL document of accuracy. If the WSDL document you requested cannot be found or it is generated dynamically, it is likely that the web service target has programming errors.
  
  (3) just to be sure, I recorded the last certificate for the secure site, I am trying to access it in the Keystore of Java from ColdFusion.
  
  I saw similar topics in the forum before involving web services and SSL, but nothing about HTTP compression. Anyone had this problem before? All the patches?
  
  Thank you!

  A useful poster on the forums of the House of Fusion showed me a work around:

  Apparently, ColdFusion uses only the WSDL to create objects to sub for the web service call, so as long as there is a service port address specified in the WSDL file it does not matter where to seat the actual WSDL file. So I just download the WSDL using CFHTTP (had to use this article to configure CFHTTP to the HTTP Compression: http://www.talkingtree.com/blog/index.cfm/2004/7/28/20040729) and then I reported my administrator SEE the WSDL on my local machine. And Presto - I can connect to the web service without problem now.

  Only problem is that I have to download the WSDL, whenever there is a change to the Web service, but I can schedule a task that downloads the file once a week or more.

• A 3000 compressed camera problem.

  Hello

  Referring to the picture below, what will happen to my camera?

  Is it broken or just hurts setting?

  The purpose of the white became pink and resemble overexposure...

  Thank you.

  This photo taken by my Tablet A3000 camera back.

  

  

  

  Hi almuhandis,

  Have you tried to restart the Tablet and wipe the glass of the camera with no lint cloth Microfiber? If it gives the same problem, I recommend that you only contact lenovo for the service because there is more likely a problem with the camera or the connection of the camera goes to the motherboard.

  If you purchased the tablet in Malaysia, here is the number:

  Phone number: 1-800-22-0116

  Opening hours: 09:00 - 18:00 Monday - Friday / Saturday from 09:00 - 15:00

  Concerning

• Update problems Jelly Bean on Xperia S compresses

  I think that we need a new topic for the bugs and problems of update of Jelly Bean.

  small fonts and icons blurry pixelated in notification or google the agenda widget

  browser crashes a lot.

  Lack Launcher Home of jelly bean

  WiFi disconnection without reason.

  Animations are not smooth tough tablet is more sensitive then android 4.0.3 release6b

• X 230 compressed: Windows 8 update problems

  I got my compressed X 230 recently and want to run it in Windows 8. After the upgrade yesterday, the touchscreen will not work: the position is always in the lower right corner, but clicking is recognized. The effect is that all the windows are closed and open alternately when you touch the screen. Quite annoying, especially as in Windows 8 touch screen would be very helpful.

  I update all drivers and bios, as much as possible, but the behavior of the touch screen remained. Someone suggested that a new installation of Windows 8 leads to a work of touchscreen. I tried once, but after about two hours of computer work, Windows came with the message that the installation has failed, and so I stay with my not working touchscreen.

  What should I do to get my touch screen working again?

  The Wacom pen is very good, so I can live with the 230 X for now, but working with my fingers on the screen would be indeed - and better the iBooks of lengths.

  Who has ideas?

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X230-tablet-display-won-t-rotate-automa...

  Try method metioned in this thread. hope it will work (propably your question is different)

  but I do not fully understand 'effect' of the touch screen described by you. The 'touch' function does not work with your fingers?

  mine is X230T (i5, 6 GB, 256 GB SSD, multitouch). The machine works great with Win 8 in PC mode and mode Tablet (with your finger or a stylus). The experience of 'touch' on this machine with Win 8 is much worse than the iPad, my opinion.

  Moreover, drivers of windows 8 for X230T on lenovo (China, Chinese site) is out of date compared to those on lenovo (US).

  http://think.Lenovo.com.CN/support/driver/driversdownlist.aspx?CategoryID=3107078&CODEName=3435&sear...

  by using google translate, you can know where to go.

  for example, the current BIOS version is 2.01.