compulsory driver for card mother imedia 1324

Similar Questions

• Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

  Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

  Try this one from HP:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

  Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

• Download driver for card miniport Microsoft virtual wifi for Pavilion dm3 win7 64-bit

  where can I find and download the driver for "Microsoft virtual wifi miniport card" for Pavilion dm3 win7 64-bit. The diagnosis says that this driver is problematic and obsolete

  Maybe the next version will fix this.

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• Need drivers for card mother Satellite A100

  Invite please!

  Where I can download the driver for the motherboard and USB 2.0 or send e-mail: [email protected]

  For East thanked earlier

  Hello

  There are several different models of laptops Satellite A100 and it can be useful if you can tell us what Satellite A100 you exactly (A100-xxx, PAxxx).

  BTW: Please check http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• HP G62-149WM/updated software driver for card MicroSoft Virt.WiFi Miniport

  (OS = windows 7 Home Premium)   PROBLEM = IN DEV. MNGR. updated SOFTWARE (MICROSOFT VIRTUAL WiFi MINIPORT ADAPTER) a MESSAGE WINDOWS SURGIT IN SAYING some THING LIKE "IT DON'T RECOGNIZE the PUBLISHER OF THE DRIVER SOFTWARE", THEN ME GIVES OPTIONS to EACH UPDATE DRIVER any WAY OR BASICALLY NOT TOO... SO I GUESS MY QUESTION IS "HOW TO KNOW WHERE TO FIND THE RIGHT DRIVER FOR ABOVE MENTIONED ADAPTER IN ADDITION TO WITH AUTO WINDOWS." UPDATE? I'D APPRECIATE ANY HELP REGARDING THIS ISSUE AND I THANK YOU ALL IN ADVANCE!

  The Microsoft Virtual WiFi Miniport is a driver built into Windows 7 and should not need to be updated. The correct version of the pilot was installed when Windows 7 was installed and no new updates of this driver is necessary. If and only if, Microsoft has released the update of the driver, you are trying to install, you should install it. Please check the source of the driver before installing this doubtful driver.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• audio driver for cards on board audio for HP m7170n

  Well, Paul told me the video driver. Can anyone help find the audio driver for the m7170n?

  I think that it is for the audio device on motherboard.

  Thank you very much!

  Hello:

  According to the specifications of the system, your PC has onboard Realtek HD Audio.

  Please visit the site at the link below. Accept the agreement and download and install the driver 7th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• driver audio Windows 8 for card mother g41m - combo of gigabyte

  I need driver windows 8 sound for motherboard gigabyte g41m-combo. My new windows 8 is loaded but not sound...: () help, please...

  I need driver windows 8 sound for motherboard gigabyte g41m-combo. My new windows 8 is loaded but not sound...: () help, please...

  If your sound is integrated on the motherboard - gigabyte - should give them if they take over this motherboard under Windows 8 operating system.

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer

• Need wireless driver for card Satellite Pro 4600 Wi - Fi built-in

  Hey people I was hoping someone could point me in the direction of some drivers wireless card for the built-in wifi card in Satellite Pro 4600. I want to use them if I use ndiswrapper in damn small Linux!

  Thank you!

  Join me on /b/

  I do not use Linux, but before you wait here please visit pages Linux for Toshiba:

  http://newsletter.toshiba-tro.de/main/index.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  Good bye

• Tecra M9 - need to Win 7 driver for PCI communication controller

  Hello world

  I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

  Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

  I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

  Can someone help me?

  Best regards
  trash

  If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
  Have you installed a driver for card slot?
  Try please install the driver of chip card reader and post comments.

  You will find that all the drivers on Toshiba download page?

• Satellite M70: LAN & WLan need driver for Win 7 RC

  Hi all

  I can't install Windows 7 RC.
  I have a Satellite M70, but I can't find a driver for card or WiFi network then "I can't connect to windows update to take the other missing drievers, too.

  I tried Vista drivers but does not work. I have try on http://driverscollection.com/ but I can not find something that works

  Help please:)

  Thank you

  byebye

  Ivan

  Windows 7 is not released until the final version and that's why you won't find not all Win 7 drivers. In most cases, you will need to research and test

  The LAN chip seems to be that the Realtek so you should get maybe driver Realtek LAN driver to go to the Realtek page would work.

  The WiFi chip should be an Atheros so we're looking for WLan Atheros WLan driver that could be compatible with Win 7.

• M58e 7269 SFF connector card mother USB2 pinouts (PIN # s & functions) ex + 5Volts = pin, etc.

  Just bought two new ThinkCentre M58e 7269-SFF.

  We need to use the internal motherboard USB2 connection to provide the connectivity (for printer POS cash drawers). It is an investigation of the pinout USB2 motherboard (functions & key numbers. USB2 connector for card mother M58e is 12 pins, with a key (unused pins). Cannot determine what PIN pin connector 1,2,3 etc and cannot find the description of USB pins on each spindle is used for (Eg. Red, Green Black Yellow and their function. Example the 5Volts pins & #, ground pine & their numbers etc.). Reflected on all knowledge databases, previous community issues and called Lenova support numbers (but failed to get a response).

  The second pattern HERE will give you the info you need.

• Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS

  I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:

  PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver

  Configuration AMD address map - currently using the standard driver microsoft

  HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD

  AMD HyperTransport Configuration - currently using the standard driver microsoft

  Configuration of various AMD - currently using the standard driver microsoft

  ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft

  ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft

  Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA

  Standard ATA IDE Controller - currently using the standard driver microsoft

  Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?

  PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft

  I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.

  Sean

  OK, I found the appropriate drivers!

  ATI drivers:

  Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277

  SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.

  Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.

  Message edited by shfire2000 on 01/26/2009 21:51