Computer can not find wireless networks

Similar Questions

• My computer can't find wireless networks.

  My computer can't find wireless networks. When I search for them I can answer "wireless networks service is neither the race" (the Swedish free translation).

  I have Windows Vista and I'll try to find my new wireless network working om my laptop and my iPad.

  Hello

  (1) did you check the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?

  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.

  Method 2:
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run System File Checker analysis, try the steps mentioned in this link: http://support.microsoft.com/kb/929833

  Method 3:

  I also suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

• My laptop can not find wireless networks

  My laptop can not find wireless connections, that it works fine when I use an Ethernet cable.

  It works on 64-bit windows and has a intel wifi link 1000 series

  The most likely reason is that the wireless card is turned off or disabled.  Most laptops have this feature in order to save battery power if the wifi is not necessary.  Depending on your laptop, it is a physical switch or a combination of the Fn key and one of the F keys.  See your User Guide for more information.

  You can also check the Device Manager (click the ORB start and type Device Manager and then press the Enter key).  Expand the "Network adapters" section by clicking on the arrow to the left and then double-click the entry for the Intel Wifi Link.  Check 'Device status' in the 'General tab '.

• Updated to Windows 8... now can not find wireless network

  I've updated from windows vista to windows 8. Everything went well, but now the computer can not find wifi connection while it worked before the upgrade. Any ideas what's past? Or what I can do to find l ' internet and connect?

  Thank you.

  This 'upgrade' is really not much more than a NEW installation of the operating system.

  Did you visit the manufacturer's web page a computer for your computer model - more precisely their downloads and drivers for your system model - the article and enter all drivers of Windows 8/8.1 available to them for your if everything goes well supported by said manufacturer under Windows 8/8.1 computer system?  (This is a manual process.  Microsoft/Windows doesn't make or can't stand most (if any) of the hardware components inside your computer.  You must obtain and install these drivers yourself.

  The motherboard chipset.

  Hard drive controller.

  Video.

  Audio.

  Network.

  etc.

• Computer laptop Windows 7 can not find wireless network connections

  My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

  You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

  There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

  Good luck.

• Re: My Satellite L500-1XC can't find wireless networks

  My computer can not find wireless networks more and that's because drivers. I downloaded one I thought was mine from this page https://aps.toshiba-tro.de/wlan/?page=downloads, but the download link is no longer active :(

  I am able to select Wireless as a connection, but he does not see anything and my wifi works entirely 100% so any help would be great guys :) Thank you

  I agree with Timox: you need WLan 802.11bgn Realtek RTL8191SE Wlan card driver.
  Download driver Toshiba WLan portal should functions since I managed to download the driver of the page package.

  Alternatively, you can download the driver directly from the Realtek page: [RTL8191SE-VA2 | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• HP Photosmart C309a AiO Wireless on and work, can not find the network!

  My printer has stopped printing a couple of days.  It was fine, now it is not.  The blue light wireless radio is turned on, but when I run the network set in place, it works simply and can not find my network.  I ran the network diagnostic and it detects my network, but can't find my printer.  On the test page, it fails on SSID.  I could use some help to get this operational back guys!  Thank you!

  Well, I can't comment officially, but I'm sure that has been discussed in, and design changes avoid this problem.

  Regarding something is through HP, you could call the HP Technical Support and check if you have options to upgrade to a new printer. They should have a list of printers and prices offered as part of the upgrade process. There is no charge to call and check the options you have. If you are in the United States, call the 1-800-474-6836. Otherwise, click on the contact HP link at the top of this page.

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Equium A200-15I can't find wireless networks after recovery

  After making a recovery using the Vista CD from my computer (an Equium A200 15I) cannot find wireless networks. I went into the device under network adapters Manager and then there is realtek RTL8101 Ethernet NIC etc and in the other devices section it is Ethernet and controller of Stoeage of mass.

  I'm not really sure how I can get the computer to recognize and wireless networks, but I am aware that the driver is missing!

  Hello

  Try to update the wlan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  You can also check for other drivers if it is not installed:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Windows 7 can not find the network

  Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

  Hi Kate,.

  Thanks for posting your query in Microsoft Community.

  I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

  • Restoring the system led?
  • What exactly happens when you try to connect to the Wi - Fi?

  This could be due to several reasons, including any third party software conflict. Try the following methods and check.

  Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

  Step 1: Start the computer using safe mode with networking

  Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

  Please refer to: , start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Update the network adapter

  Step 1: Update the driver through Device Manager

  a. click Start , type Device Manager and click on it

  b. expand network adapters

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

     Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Not finding wireless networks

  Hello, I recently updated my motherboard due to hardware failure now pci wireless card cannot find any wireless networks and will seek not even networks.

  I tried the older drivers, change the pci slot and I tried to configure the network manually, but when I try it it says "an unexpected error has occuered" and it's all no other options.

  So I got a usb wireless adapter and installed and the same thing happens, it will not look and can not have all networks.

  I ran the scan of the windows files and it reports no errors

  Any suggestions would be helpful

  Hi Cannonballgum,

  1. is the wireless card detected by Windows?

  First check if the wireless card is detected by windows.

  1. Open Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you see the card wireless available in the Device Manager, then visit the card manufacturer site download and install the update to the latest driver control if it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• JournE Air 801 not finding Wireless Networks

  My 801 Air could see my wireless network when I first turned on. I had trouble getting security WPA2 to work so I reset the default 801 by using the reset on the device.

  Now I am unable to find wireless networks.

  Any ideas how I can get my 801 on wireless networks?

  Thanks for your help/advice.

  Hello

  Are you sure that the Wifi is enabled in the settings of Air 801?
  Usually the WiFi icon should be visible in the upper left corner, if the WiFi network has been activated.

  I downloaded the manual for Air 801 (European Toshiba page-> support) and download-> user manual. On page 42, you will find all the details on the networks.

  You can use the Wifi protected Setup. It is the best way to connect to the network.
  -Select Wifi protected setup and press OK
  -Press the wps button on your router wlan and press ok to continue
  -Press exit to return to the previous page.

  Then use the Wifi Wizard to detect and connect to the WLan router in your region.
  -wifi select Assistant
  -Press on top and down to select your preferred router
  -Press OK to confirm your selection
  -Enter the password router e

  You can also use the advanced configuration
  To do this, check the user manual!

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• Can not find the network controller driver please help

  Hi, I just did a full erase and reinstall and I can't find my network controller driver, I installed about 50 of them, read many messages, I've tried everything that someone please help...

  Windows 7 Ultimate x 64
  G6-1c40ca
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4747 & CC_028000
  PCI\VEN_14E4 & DEV_4747 & CC_0280

  This should be the driver Broadcom wireless lan to your laptop.

  Best regards

  ERICO