Computer can't find HP Photosmart D110a Printer even though it says its connected to the network

Similar Questions

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• HP Photosmart C6180: hp photosmart c 6180 turns off when it is connected to the network and blinks green photo

  When my Photosmart C6180 is related to two wireless and ethernet network after any number of hours it stops itself down and the green light on the front panel by the icon of camera flashes.  You will then have to push the power button to turn back.  Not very practical for a network printer. Router is a Linksys WRT 1900 ACS.

  Hi wjabdella,

  Thank you for your answer!

  In the post I provided on the hard reset, he mentioned: sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  So by unplugging the power and waiting, it resets the printer almost to its original state without making a complete factory reset and lose any other information.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that answers your question!

• HP Laserjet printer does not print even though it says no problems found

  Original title: the orange light on my printer continues to Flash if she said no problem was detected! and it does not print!

  my printer is a HP LASER JET professional CP1020 SERIES.

  Hello

  Were there any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  If the problem persists after that run above mentioned methods, then you need to contact HP to the following link and make sure with them about this:

  http://h30434.www3.HP.com/

  Hope this information is useful.

• Computer can't find a printer Wireless Signal

  My computer is connected to our wireless network, but can't find the printer wireless also connected to the network. Here are some of my info. Someone has ideas of how to do to solve this problem?

  Windows IP configuration

  Name of the host...: work

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: hsd1.tx.comcast.net

  Local Area Connection wireless LAN adapter * 13:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct map virtual #2

  Physical address.... : 26-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : 16-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet Ethernet adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : F0-92-1C-EC-91-E9

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : hsd1.tx.comcast.net

  ... Description: AR9485 Qualcomm-Atheros 802.11b/g/n WiFi adapt

  Physical address.... : A4-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2601:e:2880:4000:1f62 (Preferred)

  Lease obtained...: Thursday, March 19, 2015 11:56:09

  End of the lease...: Monday, March 30, 2015 09:55:28

  IPv6 address: 2601:e:2880:4000:b802:91 has 6:701 b: 7419 (Preferred)

  Temporary IPv6 address...: 2601:e:2880:4000:60ac:66ac:9534:45c1 (Preferred)

  Temporary IPv6 address...: 2601:e:2880:4000:bc50:2d9a:18fc:a414 (Deprecated)

  Temporary IPv6 address...: 2601:e:2880:4000:d150:f11:21 has 9: cbd8 (Deprecated)

  Address IPv6 local link...: fe80::b802:91 a 6:701 b: 7419 %3 (Preferred)

  IPv4 address...: 10.1.10.58 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, March 19, 2015 11:56:08

  End of the lease...: Tuesday, March 31, 2015 13:14:45

  ... Default gateway. : fe80::250:f1ff:fe80:0 3%

  10.1.10.1

  DHCP server...: 10.1.10.1.

  DHCPv6 IOOKING...: 61135664

  DHCPv6 DUID customer...: 00-01-00-01-1A-2C-70-2F-F0-92-1C-EC-91-E9

  DNS servers: 2001:558:feed:2

  2001:558:feed:1

  75.75.76.76

  75.75.75.75

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter ISATAP.hsd1.TX.Comcast.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : hsd1.tx.comcast.net

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:9d38:6abd:3871:178f:9d37:3318 (Preferred)

  Address IPv6 local link...: fe80::3871:178f:9d37:3318 %7 (Preferred)

  ... Default gateway. :

  DHCPv6 IOOKING...: 335544320

  DHCPv6 DUID customer...: 00-01-00-01-1A-2C-70-2F-F0-92-1C-EC-91-E9

  NetBIOS over TCP/IP...: disabled

  Hello

  Thank you for the information.

  I would like to inform you that we have a support forum dedicated to systems on area issues, I suggest you to send your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• Computer can't find a driver for Epson Stylus BX305f?

  Computer can not find the package to control the printer Epson BX305F

  Have you checked to see if you have installed the latest drivers and software: http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/3840

  Also, download and view the user guide.

  J W Stuart: http://www.pagestart.com

• HP Laserjet 1102w connects to the network but can't find any computer

  Hey guys;

  I recently got a router D-LINK DSL-2570U. I tried to install my printer 1102w on the network that has been a success, but at the last stage, I get this error:

  The printer has been able to connect to the network wireless using the wireless identification information.  However, this computer is unable to communicate with the printer.

  Please check that the printer is on the same network as this computer, and if you use WEP, check that the credentials have been entered correctly and try again.

  I have not had any problems with my printer while I was with Linksys router wag120 (my back). Since my new router has many more available parameters, is there any kind of specific settings that I need to put?

  I'm on windows 8.1.

  No matter how appreciated helpis.

  Thanks a lot Gemini02

  I followed your instructions but still no joy! Non of them worked for me!

  But then I came across sollution by chance!

  New routers offer a wide range of parameters that must be set manually!

  There is an SNMP option in the configuration page of the router that should be enabled so that you can get in touch with other devices on the wireless network!

  That's all! I allowed him and everything works fine!

• My computer can't find wireless networks.

  My computer can't find wireless networks. When I search for them I can answer "wireless networks service is neither the race" (the Swedish free translation).

  I have Windows Vista and I'll try to find my new wireless network working om my laptop and my iPad.

  Hello

  (1) did you check the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?

  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.

  Method 2:
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run System File Checker analysis, try the steps mentioned in this link: http://support.microsoft.com/kb/929833

  Method 3:

  I also suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Computer can't find D: / /, load win7 install disk, but he finds no problem

  Computer can't find D: / /, load win7 install disk, but he finds no problem

  TuneUp utilities reports
  Statements from Windows that device "TSSTcorp CD/DVGW SH-S182F ATA Device" does not work properly.

  Device Manager reports
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Windows Update driver reports
  Windows has determined the driver for your device is up-to-date

  Downloaded 3 replacing driver software, none of them reports a problem with the driver

  Thought I could reinstall win7 but if it does not reinstall the driver faulty, I won't be able to install the player software

  All help get will be appreciated

  Why would install you software on your D drive or partition?

  Any program .exe must be installed where the operating system is which is the conventional way and supported way :)

  Personal folders may be located on other partitions, but programs are better installed where the operating system.

• I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

  I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

  Hello, Dorian,

  If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

  If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• my computer can't find the drivers, I need my network

  Hello, my computer can not find the drivers I need my network. I bought a wifi key today so that I can use internet.

  Hello

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  I suggest to follow the steps provided and we update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Check out the link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Photosmart HP 5510: printer not connected to the network, although it

  Hi people,

  I am at my wits end with this and you are my only hope (what Star Wars quote).

  I have a HP Photosmart 5510, I've had around 2011.  I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.

  However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.

  I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).

  I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.

  Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:

  "YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.

  What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.

  I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.

  Hey @Mvdarbs,

  Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.

  Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.

  I recommend you try the following steps:

  (1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."

  2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.

  3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.

  4) remove the printer from your Mac. If you are not sure how, refer to the

  guide for advice.

  one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.

  5) reinstall your printer: click here and install the driver that you are prompted.

  Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  See you soon,.

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!