computer Dell laptop will not work when using battery

Similar Questions

• my computer dell laptop will not play a dvd or cd... when I open windows media player, nothing happens

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  When I put a cd or dvd in my computer dell laptop with windows 7... nothing happens... and when I open windows media player does nothing... no error message... nothing appears on the screen... It is as if the program does not exist yet... when I try the resolution of problems and he doesn't find anything wrong... can someone help me

  ===================================
  If you insert the DVD in your DVD drive and go to...
  Start / computer... and on the left, click on the drive letter
  the DVD player is in... He launched the DVD?

  Maybe your AutoPlay settings must be changed:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

  Still without success:

  Take a look at the following article:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• Satellite A660 - Webcam does not work when using Skype

  I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

  I have the latest version of Skype (5.3.0.111).

  The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

  However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

  One of the main reasons we have this laptop is to use Skype video... Help, please.

  Disable webcam application start-up and exit this application before you start Skype.

  I used Skype many different models of laptops, including friends A660 and it worked correctly.

  When you open Skype video settings is listed as default camera USB webcam?

• Computer Dell laptop does not start

  Was an upgrade and lost power or connectivity during the upgrade
  now my laptop will not boot.

  Is there a way to return to a previous start-up and it stand up, so I'm able
  use and restore updates.

  ~ tom

  Looks like the partition is damaged. I fear that even a repair check does not work, the best that we can suggest is reinstalling new windows.

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• X 16-96072: my computer keyboard keys hp laptop will not work in the appropriate ways.

  My hp laptop with intel celeron is having a problem with the built-in keyboard when I was reading a document. A few keys work strangely.

  The keys f1, f2, f3... do not work according to their function.

  for example. When I press f2 it opens the dialog box search, when I press f3 it opens the dialog box search etc.

  There are also problems with keys as when I press 1,2,3,4,5 etc. it opens programs present in the taskbar in the order.

  While pressing the alphanumeric keys

  e or E:-it opens window explore. sometimes works with the SHIFT key pressed.

  r or R:-it opens the dialog box run box.works with the SHIFT key pressed.

  t or T:-it shows screen reduced by running programs on the taskbar.

  u or U:-open the ease of access center.works pressed with the SHIFT key.

  p or p:-Open box showing options computer only, duplicate, extend, i.e projector if only function key f4

  d or D: - minimizes the current window to taskbar.works pressed with the SHIFT key.

  f or f:-opens dialogue box.works search pressed with the shift key...

  l or l:-locks the window.works pressed with the SHIFT key.

  x or x:-opens windows mobility center.works pressed with the SHIFT key.

  b or b:-remove cursor if opened in a document.works pressed with the SHIFT key.

  m or m:-minimize the current window to the taskbar.

  Windows button does not work.

  SPACEBAR:-opens a different transparent windows screen for which close you have to press alt + f4. works when you press on with the SHIFT key.

  up, down, left and right arrow:-does not quite but sometimes open reduce the window open.

  other keys work properly.

  As already mentioned some keys with SHIFT keys work while some don't.

  The rest of the laptop works very well.

  Please give some solution to the problem as soon as possible because it is more difficult to work with.

  The on-screen keyboard works the same way.

  Recently, before I could try all the links my laptop 361 nr could start. So I looked in other forums and I did the hard reset and both my problems are solved.

  Now my laptop works properly so thank you very much for your help.

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• My Vista laptop will not work because it requires a password

  now my laptop dosent work at all, the only thing that appears is the password?

  * original title - annyone never look at the hard drive? *

  Hello

  Malware is perhaps the problerm:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  __________________________________________________________________

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Computer Toshiba laptop will not collect CD/DVD player

  Toshiba Satellite L305D-S5897. All of a sudden my laptop had some problems to stay connected with my CD/DVD drive. Its a Matshita dvd ram uj 850 s. sometimes, he disappears on the no hand, unexpected. I played a game yesterday and the game comes close to the top on its own, not even an error note or anything like that - it lacked the drive. I already tried Microsoft fix - it program and it usually solves the problem, but after a few minutes or something, his party once again. And then the register, there was only a higher filter, not a lower filter, and I deleted it. I restarted my computer, and I saw the disc written twice in my computer, then they both disappeared. And finally, I deleted iTunes because of what I read about it affecting the status of the drive. Helped for maybe an hour or two, then he disappeared. Are there other ways to solve this problem? I hope this is enough information.

  Hello

  iTunes and others, especially when there are several, CD/DVD programs will compete
  for resources that can lead to strange problems with readers. You have more than a couple
  other than the features included in Windows?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  If necessary:

  Check with Toshiba support, their drivers online (update or reinstall) and their known forums
  problems and possible solutions.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• description interface LabVIEW node will not work when compiling

  Hello

  I have a vi that seeks VISA resources and focuses on their name of the interface to select that you connect to.

  I have a strange problem where, if I run the vi in labview it works fine. When the vi is compiled into an exe file, it does not work.

  I traced the problem to the property node "name of Inst Intf' which gives the description of the interface. In Labview, the node of this property returns the description of the interface, as expected.

  When I compile the vi, this node property returns empty strings.

  The station nearest you, that I could find to this kind of problem is it

  http://forums.NI.com/T5/instrument-control-GPIB-serial/why-visa-property-interface-information-inter...

  However, the exe is running as an administrator, so I don't think it's a problem with permissions.

  Any help would be greatly appreciated.

  I have no idea of what was the cause, but I uninstalled the device drivers for the hardware I used, reinstalled and then restarted the computer and now it works fine.

• My computer hp laptop will not update

  I have a hp DV7 w/win7 got from QVC, I can't update windows I get an error #8007371B code. Microsoft tells me that I have to reinstall win 7, I do not have soft wear with my laptop. I contacted QVC, they told me they have no disc for win 7 and I have to buy a copy of win 7 or the update to win 8. Also my iTunes will not update. No idea what I should do now. Thanks for your help

  We need recovery software in a dedicated hard disk partition. Nobody gets recovery disc more. When the laptop is new it told you to burn recovery discs, but you can probably still recover to factory specifications using the F11 recovery method. Press F11 you power up and see if you get in a recovery environment.