Update won't start windows

Similar Questions

• laptop won't start windows xp up.error win32k.sys?

  My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

  Claire

  As you probably know Evesham closed to the public in 2008.

  I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

  Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

  I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

  As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

  If a factory restore does not work I would then test the memory.

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My PC won't start Windows after I used it to work from home

  New software has been installed on my HP Pavilion G6 to allow me to work at home home. Now I stopped the work and my PC cannot start when starting. She's just a black screen and I can't get to Windows. How can I go back to Windows? How do I get this software and Boot up to the Windows STARTUP?

  Hey RobVanEna,

  You can try to perform a Microsoft System Restore. A Microsoft System Restore will only put you back to an earlier date and it won't affect your files (except files/files saved directly on the desktop). Please note that this is different from a recovery. A recovery will be programmed the laptop back to factory conditions, and you will lose all data on the hard drive that is not backed up externally.

  Check out these instructions on how to perform a system restore. There is a lot of information at the top that you'll want to read later. In the blue link at the top of the document list, click "using System Restore when Windows 7 will not start normally.

  If the system restore fails for some reason any, let me know. It is advisable to try a few different dates so does not work.

  Please let me know if you have any questions or if this suggestion helped (May) help others with a similar problem. I'll keep an eye out for your answer.

• After 32RL933 the firmware update won't start no - green LED lights

  After an update of the firmware via wifi and use the TV for a few hours, when I changed the Source, the TV goes black and reboot, right now the TV is always black, green LED flashing and the screen turns black.

  I think it's a firmware issue, I tried to pull the plug and put back in operation and does not. I have donwloaded a rl933_748304.bin firmware on the site, loaded onto usb and plugged into the TV and does not work, so I think I need a "auto-install" firmware that runs at the start of the TV instead a normal firmware.

  I've read that a lot of people have this problem, I hope that you could give me support.

  Thanks in advance and sorry for my English.

  Try this:
  Turning the TV off. Wait 30 seconds, then press power button.
  Then OFF it again. Unplug the power cable and LAN cable.
  Reconnect the cable LAN and power ON the TV.
  Now reset the TV.
  GO to the system configuration menu, select TV point Reset and press OK to select.

• stream HP 11: after update won't start

  I've updated my laptop last night and since I've updated, things would turn out. Guard goes to a blue screen and nothing happens.

  Hello @ccamp,

  Thanks for the quick response!

  Your product has the CPU and RAM to run Windows 10.  However, it may not have sufficient free space on the hard disk.  Windows 10 requires 20 GB to a 64-bit operating system.  Your product has a 32 GB hard drive.  However, more space is probably used for your current operating system.  In order to upgrade to Windows 10, you'll need to use an external hard drive, or USB, which is large enough to handle the upgrade.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Computer Dell won't start windows xp

  what it means when it says floppy diskette seek failure drive 1 not found serial ATA SATA - 2 Dell Dv051 series BIOS version A03

  Hello

  · Were there any changes made on the computer before the show?

  · What is the model number of the computer?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  Microsoft cannot provide specific instructions for changing your CMOS and BIOS settings because they are specific to your computer. For more information about the correct CMOS and BIOS settings for your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Windows 8 lenovo bookno net dvd rom won't start windows, still trying to repair disk errors

  , I like the oem license is stored in the bios, how can reinstall windows with disc or usb

  Hi all the success possible,

  After finding that windows 8 is wired in the Bios and that the media is now the manufacturer I dug in the Lenovo Web site.

  The computer shop I took it to could not diagnose the cause of the other that a defective hard drive old 2 years priming scrap the laptop and waive the fees of consultants £25.00.

  Fortunately, I refused, released and after that audit on the lenovo Web site found that the option of repair on the lenovo is wired with a hidden in the drive partition.

  So with a simple turn on and outside while pressing the small 15-minute Windows 8.1 reset button has been restored and is now currently update itself to windows 10.

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• error system32\drivers\fastfat.sys when you try to start windows xp

  I've upgraded to a new laptop with windows 7 and had to get some files off my old Acer laptop which has windows XP is installed. It won't start windows now and I get a "windows is not start because the following file is missing or damaged:

  System32\Drivers\Fastfat.sys
  I don't have the original Windows disc as it was an OEM laptop, I have not either the recovery discs. Can anyone help?

  If you can remove the drive of your laptop then this adapter you can connect it to your computer as an external USB drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16812156102

  J W Stuart: http://www.pagestart.com

• Since the last update will not start using 3 gb switch.

  From the windows of the last update we cannot start Windows XP (SP3) x 32 using the/3 gb switch. What is happening on three different computers. We need the switch / 3 gb to properly run SolidWorks.

  We have finally "solved" the question of rolling back our video drivers. I'm at home right now so I don't know the exact nVidia video card or driver, as far as I know, it's that they came on ready Solidworks HP workstations. I also know that we had been turn most recent for a year with no problems drivers until this update of Windows one did what he did. Just for fun, I reinstalled the latest driver once and once more the switch / 3 gb stop working.

• Split HP 13 x 2: laptop won't start

  
  

  Hello @migo10,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the laptop won't start does not and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please consult the following document and let me know how it goes:

  Computers laptops HP - computer won't start (Windows 8)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• Windows Vista won't start after installation of microsoft updates

  I just install microsoft updates, then the computer is turned off and it does not load windows.  A box appears that says
  Microsoft Visual C ++ Runtime Library.
  This application has requested the execution to terminate in an unusual way.  For more information, contact the application support team.

  The options are to click OK or close the box.  I tried both and it just keeps popping up the same box as above.

  Hi Mas_007,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:

  To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.

  (B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

  (C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:

  I suggest to empty the temp folder and later, follow these steps:

  i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Additional information: http://support.microsoft.com/kb/936212

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 won't start after secuity 12/10/2010 dates

  original title: updates security for 10/12/2010

  Windows 7 won't start after secuity 12/10/2010 dates

  Hello
   
  Follow these steps and check if that helps.
   
  Step 1:
   
  Remove all external devices and then try to start again.
   
  Step 2:
   
  Start your computer in safe mode and check if it starts.
   
  Step 3:
   
  If it starts in safe mode, and then try the system restore , safe mode.
   
  Let us know.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]