computer does not recognize sansa e260v2 when I plug

Someone out there... Help, please!

Have tired the suggestions contained in this message?

Tags: SanDisk Sansa

Similar Questions

IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

Computer does not recognize sansa fuze

I have my fuse sansa for over a year and no problems, but now I'm trying to plug it in (to add songs), but it shuts down and the computer does not recognize it. I formatted, but still once, nothing happened.

What is going on?

I am sure that is not the computer because it recognizes the other gadgets and souvenirs, memories, external drives, etc.

Help, please! I'need to still have a few records in my rocket!

Thank you.

Have you tried another cable?

Why my computer does not recognize the CD when inserted?

I am trying to install a software on CD, but the computer does not recognize it. I tried even my audio CD but they is also not recognize it.

Hello

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

==========================================================

After the foregoing:

References to Vista also apply to Windows 7.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

computer does not recognize my ipod when you try to download music

try to downloasd music on my ipod and the computer will not recognize even the ipod

Hi maangise,

I suggest you try the following steps:

Step 1: Run the fixit provided in the link below.

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

Step 2: Search for the error code in Device Manager

1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

2. in Device Manager, locate the Bus USB controllers and then double-click the device name.

3. Locate the Apple Mobile Device USB Driver in this list. In some cases, one of the entries will say 'Unknown' in its name. In other cases, Apple Mobile Device can be attached to a different section of the Device Manager.

4. under the gaze of general tab for the status of the device for any error code indicated.

http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

Try to update the drivers, Click on the driver tab, then click on set to update driver and follow the instructions.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Step 3: You can follow the steps mentioned in the link below

http://support.Apple.com/kb/TS1369

For more information, see the link below

http://support.Apple.com/kb/TS1538

You can check with apple to get help

http://www.Apple.com/support/

Thank you, and in what concerns:

Ajay K

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

Computer does not recognize the discs when inserted in my D: and E: drives.

Original title: DISK DRIVES D AND E . Do NOT WORK

When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

Hello

It is not unusual for the same problem have an impact on both drives, in fact, is planned.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

PC does not recognize the ipod when I plug in the USB cord.

I have an ipod touch, and it will replace my old ipod. When I plug the USB cord, nothing is recognized by the computer. It is also not recognize my old ipod when I plug it now. I have other devices that use a USB cord, and they work as they should.

Apple told me to check with Security Essentials to see if they are blocking a pilot... I am quite at a loss. It's the ipod or it is safety, or is it the computer?

I tried everything on separate computers, and they don't always work.

Any help is appreciated!

It is not MSE-you get a warning if it were. Try another cable or try on another PC. It sounds like the cable might be the problem if all of a sudden or iPod works.

Windows does not recognize my printer when I plug the USB

I recently had my computer repaired of malware/virus/faulty software issues, and now the printer that had formerly been installed is no longer recognized. It is not in the Panel and plug/unplug the USB does nothing. I don't know where my printer CD is, as I was not the person who originally installed this unit (I'm the kind of office it's guy, with very little knowledge, as you can see).

Any help with this problem would be greatly appreciated. Thank you.

Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

http://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8)

Why my computer does not recognize my iPod when it is connected?

Whenever I plug my iPod into my computer, the trust option is not pop up, so it doesn't appear on my iTunes, all that says is, ' do you want to allow this computer to access your photos? I plugged my iPod on other computers and it works fine. I plugged into other devices on my computer and it works fine. In addition, my iPod would freeze at random just for no reason, and I don't know why. The time is all messed up as well, which means it switches at random times and time stops working if I turn of. It started a week ago and it's really annoying. Can someone please?

I also have this problem, iPod touch 5th generation iOS 9.2, but I'm under 10 64 bit Windows, I tried to uninstall and install itunes remove all plugins and services and there are no other programs interfering with itunes so don't know what to do, also tried to reset the ipod to factory settings as well. My computer recognizes it as an external storage device though if this is helpful at all.

Computer does not recognize the phone when connected via USB

original title: usb recogonozation

I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

My computer does not recognize plugged on headphones

Why my computer does not recognize that my headphones are plugged into the front of my computer? When I run the diagnosis of Windows 7, it says that are not plugged my headphones.

Original post: Pls help, I'll love you forever! : )

Tuesday, February 14, 2012, 21:58:26 + 0000, smlunatick wrote:

It is not a normal process to have a headset before jack in Windows.

Right, before headset decision-making has nothing to do with Windows. If you
do it, it's a characteristic of the species.

I have it on my case.

Ken Blake, Microsoft MVP

Computer does not recognize my Sansa e260

I run Windows 7 Home Premium. My MP3 player is a Sandisk Sansa e260.

Normally, to charge the Sansa, I've just plug it into a USB port on the computer. It is immediately recognized and loading begins.

Today, while I was out walking the dog, the Sansa ran out of juice. So when I got home I plugged the computer in the usual way. The computer does not know that it existed. It didn't start to load, it does not appear as a drive in Windows Explorer.

I rebooted the computer with the trendy Sansa. No improvement. I ran "Find the hardware changes" on the USB entry in Device Manager. No change.

I tried the Sansa in computer from Vista to my wife (who also accused there from time to time). Same result - the computer does not recognize the Sansa.

Any ideas, please?

Try performing a reset before you plug it into your computer to charge. There may be just enough juice left for this. You can usually squeeze a few more drops of a flat (any type) battery by heating slightly he. Maybe put it in your Pocket next to your body under a sweater for a while, or take it to bed with you. Your body heat to warm up gently.

Now that old hat so to speak, press and hold the market/menu button while you count to 20. You can do it silently so the people around you do not think you have freaked out. OK, now, release the button and after a few seconds, press again to see if it boots up on its own. If so, place the cable of life support (Sansa) to quick before he dies again.

Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already.

Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already. I can't my PID because I can not install the program. I can't get help from microsoft because I do not have my PID. Help please

Your optical disc drive must be able to read the DVD to install Vista.

See you soon. Mick Murphy - Microsoft partner

Computer does not recognize LaCie external hard drive when it is connected.

Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

The device is a hard drive (250 gb) bought in 2006. LaCie support has provided relevant solutions.

I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

I have disabled the Windows Firewall.

The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

Thank you very much for your help.

Thanks for the reply.

In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

It worked for me.

Thanks again for the reply!

Computer does not recognize the CD - RM when connect camera on Windows 7 Home Premium

I have windows 7 Home Premium and just today my computer does not recognize my CD so I can add my camera to my computer. I worked on it for about 6 hours. looking everywhere and tried most everything, but it still doesn't work? Can you help me? Thank you..

Try to use a DVD cleaning disc to clean the disc. If this fails so that the reader has probably not and must be replaced.

computer does not recognize sansa e260v2 when I plug

Similar Questions

Maybe you are looking for