Why my computer does not recognize my iPod when it is connected?

Similar Questions

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• Why my computer does not recognize the CD when inserted?

  I am trying to install a software on CD, but the computer does not recognize it.  I tried even my audio CD but they is also not recognize it.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• computer does not recognize my ipod when you try to download music

  try to downloasd music on my ipod and the computer will not recognize even the ipod

  Hi maangise,

  I suggest you try the following steps:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Search for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate the Bus USB controllers and then double-click the device name.

  3. Locate the Apple Mobile Device USB Driver in this list. In some cases, one of the entries will say 'Unknown' in its name. In other cases, Apple Mobile Device can be attached to a different section of the Device Manager.

  4. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Try to update the drivers, Click on the driver tab, then click on set to update driver and follow the instructions.

  
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   

  Step 3: You can follow the steps mentioned in the link below

  http://support.Apple.com/kb/TS1369

  For more information, see the link below

  http://support.Apple.com/kb/TS1538

  You can check with apple to get help

  http://www.Apple.com/support/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer does not recognize that I have two monitors connected.

  I have a VGA splitter cable, but even after I used the cord to connect two cords vga to a port, the computer is only noted one of the monitors. So when I go into settings to try to get them to display both, or to identify, the computer notice only a single monitor. So the problem is that my computer does not recognize that there are two put monitors in place.

  Cable splitter separates the single signal only. The computer only sees it as an output. You would need a different video card use the two forms as separate monitors instead of simply split the signal.

• What should I do if my computer does not recognize that there is a device connected media player?

  I have a toshiba laptop and everytime I try to plug in my iPod to download music, Media Player does not recognize that the device is there, to that effect, I can't sync the music on my iPod.

  Hello

  Thanks for posting your question in the Microsoft Community.

  Is it recognized in Windows Explorer?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter to check if it detects anything:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• PC does not recognize the ipod when I plug in the USB cord.

  I have an ipod touch, and it will replace my old ipod.  When I plug the USB cord, nothing is recognized by the computer.  It is also not recognize my old ipod when I plug it now.  I have other devices that use a USB cord, and they work as they should.

  Apple told me to check with Security Essentials to see if they are blocking a pilot... I am quite at a loss.  It's the ipod or it is safety, or is it the computer?

  I tried everything on separate computers, and they don't always work.

  Any help is appreciated!

  It is not MSE-you get a warning if it were.  Try another cable or try on another PC.  It sounds like the cable might be the problem if all of a sudden or iPod works.

• Computer does not recognize the discs when inserted in my D: and E: drives.

  Original title: DISK DRIVES D AND E . Do NOT WORK

  When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

  Hello

  It is not unusual for the same problem have an impact on both drives, in fact, is planned.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer does not recognize the Ipod shuffle.

  original title: help!
  I just bought a new iPod shuffle (4th generation), and when I connected it to my computer, it will not be displayed. And it let me sync any music. Does anyone know what I can do about it?

  You must download and install iTunes to sync music to an iPod.

• Why my computer does not recognize Spyder2 monitor color device?

  I just loaded the software for monitoring of color SPyder2.  The software icon on my desktop, but when I try to run an analysis of the color, I get an error saying that it cannot recognize/find the Spyer2 device.

  Hello

  1. the unit recognizes in Device Manager?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Run the fix it and then check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• my computer does not recognize my ipod

  I plug my new ipod in my computer and I don't get the usual popup you get. He says it is an unknown device...

  Hello

  Get troubleshooting here:

  iPod not recognized in 'my computer' and in iTunes for Windows .

  You can also ask in the forums of Apple iPod for advice:

  https://discussions.apple.com/community/ipod .

• Why my computer does not sometimes, sometimes it's done (to connect)

  Hi all - when I turn on my computer it get in the log on screen most of the time, but other times, when he's there, the red light blinks just desktop case on. Apparently not "launch" correctly. I have connected a printer and speakers. When I move the log on screen and to get to the program of the icons start programs remain a Virgin and an hourglass appears in the taskbar when I move my mouse over it.

  Can anyone help please?

  Hello gazHolmwood,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• Computer does not recognize the phone when connected via USB

  original title: usb recogonozation

  I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

  As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

• computer does not recognize sansa e260v2 when I plug

  Someone out there... Help, please!

  Have tired the suggestions contained in this message?

• Windows does not recognize iPhone/iPod devices

  I tried to add music to a new iTunes library to my iPhone on my pc when I accidentally pressed the notification "do not trust this computer."

  I tried following the advice in this thread (removed the pilot): I accidentally hit "Do not trust" and now my iPhone won't sync to my computer. It won't ask me to trust him again even when I restart everything. Now what?

  And now my computer does not recognize my iPod or my iPhone when I plug it into the USB ports. They don't even charge. I know with certainty that the problem comes from my pc because when I plugged them both in another pc, Lesmanteaux both able to connect to the computer/iTunes. I tried restarting both devices, tried resetting the location and privacy, by restarting the computer, even performed a system recovery.

  When I go to "Devices and printers", the two devices are listed under Unspecified, Apple Mobile Device USB Driver, unknown category, troubleshooting needs (I tried that as well, when I do that it is said that all driver software is up-to-date)

  Driver status: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  All my software is up to date (iPhone, iPod Nano, Itunes 12.1. (2. 27 64-bit)

  Please help me, I've got a flight tomorrow and all I wanted was to upload music.

  Have you tried using different USB ports? Try and see if it triggers the question "confidence." You can also give your iPod a restart is forced. Press the sleep and home for about 20 seconds. When you see the silver Apple, let go and let it reboot, then try again.

  If this does not work you can try something a bit more drastic. That's a lot of time, but not horrible. I had to do a few times with my devices and my computer.

  Try this, go to your control panel, add/remove programs.

  Remove iTunes (you won't lose any content not the program, I've done a few times), Mobile Apple, Apple Application Support device driver.

  For good measure, you can restart your computer just to remove the cobwebs.

  Then come out and redownload iTunes and reinstall it.

  Plug your iPod in and drivers must be reinstalled.

  All of your old info should be there. I've never lost anything. Essentially to remove iTunes and drivers have to reinstall fees, which can remove the obstacle 'I don't trust you. "