PC does not recognize the ipod when I plug in the USB cord.
I have an ipod touch, and it will replace my old ipod. When I plug the USB cord, nothing is recognized by the computer. It is also not recognize my old ipod when I plug it now. I have other devices that use a USB cord, and they work as they should.
Apple told me to check with Security Essentials to see if they are blocking a pilot... I am quite at a loss. It's the ipod or it is safety, or is it the computer?
I tried everything on separate computers, and they don't always work.
Any help is appreciated!
It is not MSE-you get a warning if it were. Try another cable or try on another PC. It sounds like the cable might be the problem if all of a sudden or iPod works.
Tags: Windows
Similar Questions
-
My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)
My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)
When did this problem start? What did you change shortly before it all began?
Please quote the exact text of the message you get, verbatim.
-
DreamColor LP2480zx does not recognize the USB for calibration
Hello
I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration. I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard. My setup is like this:
Reference Dell 690 running 64 bit + Windows XP
DreamColor LP2480zx
Apple Cinema Display 23 "
I bought the DreamColor used, and in all other respects, it seems to work very well. The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration. I installed the last APS (version 2.0) and updated to the latest firmware. These updates produces no change in recognition USB problem.
The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.
I had trouble with this problem for a few days. I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution. If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.
Thanks for any help
Clay
An update to my previous post, I realized a work around for this problem.
Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems. I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system. HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.
My solution was this: I had connect the monitor to a regular running XP 32 bit system. After I did, I could re - calibrate the monitor without the problem of USB connection. This isn't a very good solution because not everyone has access to several machines, running different operating systems. But it's a work around, and it worked for me.
Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.
Clay
PS- I posted this as resolved, only because I was able to calibrate my monitor. It's not really solved the problem, but it gets the monitor working again. Maybe HP will address this problem in the future, but I'm not holding my breath.
-
Satellite A200-1AE does not recognize the USB 2.0 flash drive
I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
The same USB works without problem on other computers with vista!Someone knows what to do?
Hello
First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches
Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.
Best regards
-
Lite-On ENAU108 CD Burner IT does not recognize the USB key
Windows Media Player does not recognize the USB drive letter
Although the Windows Device Manager recognizes it.
I want to add drive from the device to WMP
Hello
1. have you made any hardware changes or software on the computer before this problem?
2 - is the USB key in Windows Explorer?
3. you try to transfer music files from the USB key?
4. what version of Windows Media Player do you use?
If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.
a. open the Windows Media Player, click on organize > manage libraries > music.
b. click Add and navigate to the location where the file is stored in the Windows Explorer.
Reference: Add items to the Windows Media Player libraryHope the helps of information.
Please post back and we do know. -
Win 7 Backup and Restore does not recognize the USB flash drives.
Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc. Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.
Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questionsYou can't save backups to a flash drive, you need an external USB hard drive.
Never be afraid to ask. This forum has some of the best people in the world to help.
-
Laptop does not recognize the usb mouse or the internal speakers.
The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.
In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.
I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.
Hello
Thank you for keeping us posted.
Sorry for the late reply.
I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.
I would suggest trying the following methods and check if it helps.
Method 1:
How to use the tool File Checker system to repair missing or corrupted system files,
Please follow the steps in the link provided below.
https://support.Microsoft.com/kb/929833?WA=wsignin1.0
Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.
If the problem persists, follow method 2
Method 2:
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft, security scanner please follow the steps in the link provided below.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
If the problem persists, follow method 3
Method 3:
I suggest you try the steps from the following link and check if it works.
No sound in Windows.
For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.
I suggest you to try some other USB mouse with the laptop and check if it works.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
-
Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "
I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?
My laptop is a Qosmio F60
This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.Some other HDD is recognized correctly?
What you can try is to reinstall the chipset driver, restart the laptop and test it again.Since when you have this problem? Some installed updates of the last days?
-
Aspire One d255 does not recognize the usb connected external ssd drive
I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive. Is there a way to clone my hard drive SSD, so I can exchange the disc later? I need to update the bios, install a missing driver, etc. ?
I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works. I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either. Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10. It worked and my system boots now in less than 20 seconds. We can close this thread now since I now have a faster machine fully function. Thank you!
-
Recovery media creator does not recognize the USB 32 GB on Satellite L750?
I hope that there is someone here who can help you:
My computer is a computer L750 x 64 based Satellite and the problem is that the sound disappears after a few seconds, when I hear the music from Youtube.
I read in the preinstalled usermanual can I restore the computer pressing F8 when the computer starts, but it does not work.
The continuous computer just on Windows 7.
Now I want to restore the computer to the factory standard and will therefore use the Recovery Media Creator but it does not work.I want to save data on a 32 GB USB key, but it will not recognize the stick.
I know that 32 GB is without error, because I can easily store / retrieve data either with FAT and NTFS systems.What I am doing wrong and is there anyone who has a good idea, so I can spend?
best regards ErikEven if your USB is working correctly outside of the recovery media creator, this does not mean that it should be handled properly by this tool.
I had problems creating recovery DVDs even though I was able to burn video files on the same disk.
As far as I know you must take at least 16GB USB flash memory stick
Usually, this should work.But I m wondering why you are not able to use HARD drive recovery option. Have you changed anything on the HARD drive?
-
Aspire V does not recognize the USB/phone device. Why not?
Why does my laptop recognize my phone more? He knows some device USB is plugged in, but it does not recognize.
Download and install the USB Samsung drivers:
-
Computer Windows Vista does not recognize the USB mouse
Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it
worked but stopped, got a new mouse and still does not recognize it. I really need it... help please
Hello
1. do you get an error message?2. would either not detected other USB devices in the same port?
Method 1: perform the steps in the article mentioned below and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Method 2: run the Fixit and see if the problem is resolved.
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 3: update the chipset drivers and see if the problem occurs.Note: you must contact the manufacturer of the computer to update the chipset driver.
Hope this information helps. -
Windows does not recognize the USB key for backup
Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?
Original title: Windows 7 backup
With USB installed & in the office, go in run, type: diskmgmt.msc
MSC, locate & L.click on hardware, go to actions, all, select: activate
closing of msc
-
computer does not recognize my ipod when you try to download music
try to downloasd music on my ipod and the computer will not recognize even the ipod
Hi maangise,
I suggest you try the following steps:
Step 1: Run the fixit provided in the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Step 2: Search for the error code in Device Manager
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, locate the Bus USB controllers and then double-click the device name.
3. Locate the Apple Mobile Device USB Driver in this list. In some cases, one of the entries will say 'Unknown' in its name. In other cases, Apple Mobile Device can be attached to a different section of the Device Manager.
4. under the gaze of general tab for the status of the device for any error code indicated.
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
Try to update the drivers, Click on the driver tab, then click on set to update driver and follow the instructions.
Updated a hardware driver that is not working properlyStep 3: You can follow the steps mentioned in the link below
http://support.Apple.com/kb/TS1369
For more information, see the link below
http://support.Apple.com/kb/TS1538
You can check with apple to get help
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows does not recognize my printer when I plug the USB
I recently had my computer repaired of malware/virus/faulty software issues, and now the printer that had formerly been installed is no longer recognized. It is not in the Panel and plug/unplug the USB does nothing. I don't know where my printer CD is, as I was not the person who originally installed this unit (I'm the kind of office it's guy, with very little knowledge, as you can see).
Any help with this problem would be greatly appreciated. Thank you.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?
Hi lental,
· Have what fixit you tried?
· Do you have an error message when you try to start the computer in normal mode?
· What is the brand and model of the computer?
· You're able to boot in safe mode?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
Method 3: Follow the steps in the article to resolve the problem of USB.
Advanced troubleshooting tips for General USB for Windows XP problems
For reference:
Maybe you are looking for
-
Do I need these programs?
New folders and programs keep poping up on my computer... Apple Mobile/Apple Application software/Microsoft Framework. Where they come and do I need them?
-
I have a HP m8307c. with windows 7 pro. Recently, it started to beep at startup
It ends with a black screen. The beep is 2 short then long to be repeated 5 times in total. Then followed quickly beeps once be 8 beeps more... Help please, what does that mean beep?
-
Struck by spoofers-how can I get rid of this?
SPOOFERS SENT 2 EMAILS FROM MY SITE TO MSN MAIL. MOST DO NOT HAVE TO GET SENT, BUT THOSE WHO GOT THROUGH ANGRY PEOPLE! HOW TO TRACK THIS DOWN AND STOMP ON IT?
-
Recommendations material and tips for network client 100
Hello We are currently looking at creating a wireless network separated very basic for a client in two adjacent large cabins (3 m of distance) that can support up to 100 clients max simultaneously. It will only be for entrepreneurs to access basic in
-
User and password by default for DPM 4400
Hi, I have a DMP 4400 and I chose the reset default settings. What user and password by default to access the http page the DMP? The best. Herzer.