Computer does not start properly, shows only a black screen

Similar Questions

• my computer does not start when turned on a black screen monitor

  Computer most of the time will light up all the way and the screen remains black. If I push the power button on the monitor, you can see briefly what the screen should look like through the dark.

  What should I do to fix this?  I have Windows XP Professional

  Hi TraciLucia,

  ·         You receive an error when starting?

  ·         You see the desktop behind the black screen icons?

  Try the following.

  Method 1: Start the computer in safe mode and check the number. Report of the results.

  Method 2: Check to see if this article helps you.

  Computer stops responding with a black screen when you start Windows XP

• (Vista) computer does not start properly (Please HELP)

  My guarded vista stop without known reason. He started up the main login screen and I could connect. After that so long it would just turn off. I did a system restore, system repair at startup and F8 pressed and is entered in safe mode. Now, I have a new problem. He worked for a few hours. Enough to do a bit of homework. Then suddenly it disconnects and begins to do the updates for windows. Then it goes to a black screen and tells me what he planned for a clean disk. So he goes through this process and restarts. Now it is impossible to get pass Part 3 of 3 updates and it just stays at 0%. He will remain on this page for about a minute and just keeps restarting itself. I tried F8 again and cannot get into safe mode. WHAT IS WRONG WITH MY COMPUTER HELP ME! (PS: now I use my laptop which is a XP!) Help, please!

  Hello

  Follow the troubleshooting methods in this article to resolve the problem:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Computer does not start in safe mode/get blue screen.

  I have a desktop dell Vistro 220 with vista on it. I stopped him Sunday morning and it took forever to stop, he remained on a blue screen saying closing down, so I turned it off using the power button on the tower. Now, when I try to start it I get the blue screen with a bunch of errors on it. I ran a few tests by going to the start menu and I get these error codes. I think he has a bad virus, but it won't let me start without failure, a repair or one of the other options in the start menu. I tried the normal startup too, and I get the blue screen. Is there a way to fix this or get my stuff out of the hard drive? I have pictures of my children on my hard drive that I've not saved, and I have important documents I was working on my work on here also. I did a few diagnostic tests of obtained through most of them with a pass, but when I got to one he stopped and I got these error codes: 0F00:065 D and 0F00:0232 MSG: DISK_0 - self-test read error and it goes no further. Please help me.

  Hello

  It would be preferable to do the above to remove malware and who could possibly allow the
  computer to start so it can be repaired.

  / Settings (BIOS/CMOS) often F2 as you start then look at screen - set the boot order to
  CD/DVD first and start with these to run audits of malware and the removals. Be sure to set the
  Start the command return when finished.

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus
  integrated programs-Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

• My Mac mini end of 2012 does not start: stuck at the total black screen

  Thus,.

  I tried to install Windows 8 with bootcamp using a USB key. It did not work ("" can not do a new partition on this disk or some * like that "") but this, I'm sure that has not affected my install OS X, I've never been format the Bootcamp partition.

  So, I leave the Windows installation program, reboot and remove the USB key. Now, I get the black screen that OSX shows when it has no OS, giving me the impression that he wiped / corrupted installation.

  Very well...

  But there is a twist. I can not hold option to join the boot device selector, nor can I press CMD + R or retrieve internet. Metal target does not work. I have reset the NVRAM successfully a few times, but it start always black.

  I am using a wired keyboard and mouse. I tried to use external SuperDrive with a CD player. As well as USB. I'm lost and I'm an experienced technician, and I admit that I am an iSheep. Then Yes.

  Thank you.

  (And I didn't get any update of third party other than an SSD, which worked well for centuries)

  EDIT: and I reset the SMC EDIT 2: I know also that this probably isn't a hardware problem, I am positive my OS X install and the OS X recovery partition are corrupt. I don't understand why I can't hold option, and I don't understand why the recovery of the internet does not work when you have no recovery partition. I would be grateful if I could start anything, without having to open my Mac.

  Do you get a startup chime?

  Unplug everything except KB/monitor / power and try to start with the command + R and press the Option key.

  If still problem dismantle the Mac and disconnect the internal disks and try again

  Try reinstalling the memory

  Try an another KB

• NFS Carbon does not start in Windows XP a black screen and hangs

  NFS Carbon
  Carbon NFS does not work under windows xp... freezes and the screen shows black! Please help someone...

  Hi VikasSinghXV,
   
  Try to update the graphics card drivers by visiting the manufacturer's website and see if it improves the situation.
   

  See this link for more information on the update of drivers:

  How to manage devices in Windows XP

• Computer does not start properly, but it doesn't work in safe mode?

  When the computer is turned on, it begins with pink vertical lines in the splash screen and then primer not correctly. I am able to get safe mode and operated from there. I did system restore, memory, virus scan without result. Any ideas?

  You may have problems with your graphics card.

  If under warranty, contact the manufacturer of your computer.

  If this is not the case, try a local computer repair shop.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer does not start. The text on the screen is: Windows didn't start because the following file is missing or corrupted: \WINDOWS\system32\c_437.nls.

  I tried to boot from the system cd, but nothing happens. Any help would be greatly appreciated. Thanks in advance.

  Wilma Jean,
  Thanks for posting in the Microsoft answers Forum.  The first thing you need to check is that your PC is set to boot from the CD.  The boot order is set in the BIOS and check the PC manufacturer for instructions on how to change it.  Once you are ready to start from the CD drive first, and then boot from the XP CD in Recovery Console.  This link explains how to start the recovery console: http://support.microsoft.com/kb/307654#3

  Once you start the recovery console, I would say the following two commands (links after the controls give explanations\instruction thereon) running.

  Chkdsk /r http://support.microsoft.com/kb/315265 (the instructions explain running cmd on the start menu, you will not need to do this step)

  sfc/scannow http://support.microsoft.com/kb/310747

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can save a broken computer? My computer does NOT start after the blue hp screen.

  In the past months, my computer has been the object of a freezing randomly, and Ctrl + Alt + Delete does not work. I stopped him via the power button. Sometimes, when I start it again, the computer moniter shows nothing but a black screen and the computer sounds different when it starts normally. When this happens, I turn it off again hit the left side of the desktop and turn on again. Whenever I do this, the computer starts normally, and I go on the computer use.

  Yesterday morning, after a break of 2 days, acess my computer and it is random freezing thing once again. I force close down as one normally do, and the computer does not start and displays the same black screen and the same fan/air weird sound. I stopped him and I hit the side RIGHT this time, I think and when I turn on the computer, the usual blue HP screen appears with the establishment, boot, diagnostics and system recovery things. HOWEVER, after this screen, a black screen will appear with this weird blue symbol on the upper left corner, I have never seen this and it looks like a circle with a triangle and a Pentagon below and it remains essentially on this screen forever. When I try to hit the establishment, boot, diagnostics and the shortcuts to system recovery, on the lower left side of the screen, it says "Menu boot loading...". ' or whatever the shortcut of loading represents, but nothing ever happens. When I press the other keys, this tapping noise comes from the computer at each tap of the keyboard.

  I have no idea what to do, and at this point, my first priority is to save important files on the computer. Does anyone know what is the problem? I want her more than a problem of system rather than a virus problem because refusing the boot black screen thing lasts for years. My computer is 3-4 years. I enclose a sketch of what looks like the weird symbol.

  

  MY COMPUTER WORKS NOW!

  With the flash drive, I was able to access the BIOS, which before, I couldn't.

  Eventually my computer was in some strange sort of lockdown setting, I switched it back to activate and now its work! I remember save important things in the future. Thank you very much for your help!

• H8 - 1280t - QC461AV #ABA: desktop HP - computer does not start after the installation (Windows 10) video card

  So, I just bought a new video card an XFX R9-390 and a new HX1200i POWER supply corsair (overkill ik ) that I put on a card mother IPIWB-PB for my 3 years old HP PC, and the new stupid video card is not working. the PC just does not start, I see is a black screen. My monitor is an HP 2311gt and I can't use my computer with the old video card no probs, BUT whenever I have to install the new card does not detect my monitor just and I only see a blank screen. I HAVE NO IDEA HOW I'M DOING. Help, please

  PS. I have RMA the new power supply and the video card and they got to check and send back to me, so I know that the two pieces of equipment are working very well AND of course I am currently using my PC with the old video card

  Wiraqocha, here is the link to start safe for HPs with Win 10 and instructions to enter the BIOS. It may be useful:

  HP PC - secure boot (Windows 10)

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Computer does not start

  My computer does not start and it will not Mode without failure. I run the Memory Diagnostic test and it shows I have a hardware problem. I also tried to restore my computer to an earlier time, but it showed an error. I have 1 GB or RAM and recently she continues to change from 512 MB to 1 023 MB. Help, please.
  
  Care (I know)
  1 GB OF RAM
  INTEL CORE 2 DUO 2.43 GHz (I'm not sure)
  Card Gigabyte mother
  OPERATING SYSTEM: WINDOWS 7 ULTIMATE

  It seems that the memory must be replaced.  While you're at it, maybe get over 1 GB.  Windows 7 will run on it, but not well.  If the PC came with Windows Ultimate edition, it was more than likely 4 GB or more.

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.