Computer hangs on a sporadic basis. recent update of hard drive

Similar Questions

• HP ENVY - computer laptop 17 t: HP ENVY - 17 t portable hard drive

  I ordered the HP ENVY - computer laptop 17 t with 4 TB 5400 RPM hard drive double, it is understood that the hard drive must be 4 TB? I understand? So why is my computer can see the C drive and 2 TB to 15 GB drive, where an another 2 TB?

  H397724166 my order number

  Hello

  Yes takes 2 TB + 2 TB (actually 1.81 TB and 1.81 GB). On my machine ready Envy 17 t, I got SSD 256 GB for C: and D: 1 to. Please contact point of sale, this forum is fo you and me, we can not help more. But before that, see File Explorer to see how many records

  

  Kind regards.

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• I bought a new computer, installed LR5 and import photos from a remote hard drive. Photos is finer, but all my Collections disappeared.  Is there a way to retrieve my Collections?

  I bought a new computer, installed LR5 and import photos from a remote hard drive. Photos is finer, but all my Collections disappeared.  Is there a way to retrieve my Collections?

  The Collections are stored in the LR catalog. If you had previously copied to your catalog on the other computer to the new all your collections would have been there.

  Now that you have the images on the new computer, 'IF', they were placed in the same folder structure (IE even the folder names and locations) then copy through the original catalogue "should" include your collections. If they are in the names of different folder or on a different drive letter or name of the player, then you might be able to use the feature to locate Images to find them.

• The pc on which I ran Acrobat pro IX recently had a hard drive failure.  I had only one version to download; no disc.  How can I replace my software?

  The PC on which I ran Acrobat pro IX recently had a hard drive failure.  I had only one version to download; no disc.  How can I replace my software?

  Download Acrobat products | 9, 8

  Install and enter your serial number to authorize.

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• How to: update the hard drive and memory

  Original title: what are the steps to replace my XP hard drive and improve memory? Still use XP.

  How do they manage the software requirements? I have an external hard drive. How to start the computer after the equipment is replaced? The company I bought the machine from five years ago and recently new parts is not provide much information, since their site or their non-English natually Tech.

  Hello

  · What is the number and the model of the computer?

  To replace the hard disk, you must open the computer case. I recommend you contact the manufacturer of the computer or any local technician for assistance.

  Upgrade memory, can be found: RAM: add more memory to your computer: http://www.microsoft.com/athome/setup/addmemory.aspx

• My computer does not display the correct names of my hard drives, but because of disk management.

  original title: Hard Drive rename BUG

  I have a problem with the change of name of the hard disk.

  Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.

  I am running windows 7 Pro.

  Someone please provide solution.

  Thank you.

  Hello

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows

  You can try these:

  a. open the Start Menu.

  (b) in the area of the white line (search), type regedit and press ENTER.

  c. click on the button continue in the UAC prompt.

  d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer

  e. in the left pane, right-click on explorer.exe and click on New and key.

  f. type DriveIcons and press ENTER.

  g. in the left pane, click with the right button on DriveIcons and click on New and key.

  h. type the drive letter (EX: E) you want to change the route name and press ENTER.

  i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.

  j. type DefaultLabel and press ENTER.

  k. in the right pane, click with the right button on (default) and click on change.

  To change the name of the reader - l.

  i. enter a name (Ex: My DVD), and then click OK.

  II. go to step n.

  Mr.. to restore the default drive name-

  i. leave it blank, and then click OK.

  II. go to step n.

  n. Repeat steps i to m if you want to add another drive letter icon to change.

  o. close regedit.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer does not start if the 150 GB Toshiba HARD drive is connected

  Hi, I bought an external hard drive of 150 GB PX1220E of pc world a few days ago. When I start my PC it sticks on the splash screen, and I have to unplug the usb cable and restart the pc, then connect the drive again to use it.

  Is this an error with the drive?

  Hello

  I googled a bit and it seems that it is really a Toshiba HDD.
  However, for me, this is NOT a malfunction.
  The external HARD disk is connected before starting. So I think that the computer is trying to boot from the external HARD drive and so it freezes.

  You should check the boot order in the BIOS and connect the HARD drive after you start the procedure.

• Satellite C660 - update the HARD drive firmware question

  I have satellite C660 with hard drive: MK3275GSX, firmware: v.GT001M. On another Web site support site I found the update of firmware for v.GT002D ([link: http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 & languageCode = en]).

  Can I use this update?

  Question may be stupid, but why firmware update HARD drive? Over the past 10 years I ve ever installed an update of the HARD drive.

  If Toshiba support doesn t offer an official update on the download page, I think that you don t need.

• Satellite L40 - 14Y Bios Update with HARD drive empty

  I need to update the Bios of my Satellite L40 - 14Y / PSL48E-01F01UGR of Version 1.60 to 5.50 (for Windows XP). The HARD drive is _ * authorized/empty * _.

  My problem: the 'solution' as given

  [Http://eu.computers.toshiba-europe.com/innovation/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  is unreasonable/erraneous. The instructions provided in this site for the "traditional update: BIOS is updated using a floppy ' lead 'procedure 7" for a Satellite L40.

  7 procedure is however simply: copy the 5 files, such as listed in the respective "bios - 20080617131457.zip" zip file on the disk ("+ extracted the zip file containing the upgrade of the BIOS to a formatted floppy + '). This disk is - of course - _ * bootable * _ and its usage with the error message "NTLDR" not found as shall be provided.

  We know a solution to this problen other than the installation of an operating system for the current object of updating the Bios from an operating system?

  Additional note: the attempt to install the 5.50 Bios by running winflash.exe (which is the single executable in "bios - 20080617131457.zip") failed because it "does not in DOS mode. But he could start with a few other disk started micro operating system, such as, for example, Caldera back. We know something about that? The statement: "run the *.exe extracted to the temporary folder. .... . A BIOS update diskette will be generated"as given for other than blackness L40 laptops means that a * _bootable_ disk is"generated ". Other laptops with the same Bios 5.50 as the L40?

  Post edited by: jetztkommich

  Post edited by: jetztkommich

  Post edited by: jetztkommich

  Hi jetztkommich,

  Don t do so complicated: anything that can be downloaded from the Toshiba site, you will find. If there is that only a basic Windows Update the BIOS, you can run the update of the BIOS under Windows. I think that s easy to understand.

  As Al - Ex worte, you can try the update on a Windows disc packed with bart PE.
  Check this box!

• whenever I try to run an update by using windows update my hard drive is not responding

  This product whenever I try to run a big download such as upgrades of windows and other components of windows...

  my computer will download installation ok, but when it starts to install it on my computer, it will be OK for about 10 to 20 seconds, then my hard drive starts clicking and stops responding.

  and it will stay like this for about 20 or 30 minutes and it may or may not resume the installation.

  Ive also seen it gives me a blue screen and immediately cut.

  but I have no problem with small installs

  is their an error on my computer somewhere?

  I know that I did not cause of malware I double checked everything and I always scan with MBAM

  and I have my computer set up through msconfig.exe to run on own boots only

  Although if you want to give me a link to the hijack-this site can I run this tool and give you the hijack log

  IM wondering if it is a windows vista problem, cause I have vista Home premium 64-bit sp 2, or if there is anything I can do

  cause im seriously just get XP and see if he is not only a hard drive problem

  Asron_H,
  If you encounter a problem with Windows Installer, you can verify that you have the latest version.  Go to this link to get the latest version.  Install and then let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop Gateway with Windows Vista has locking password HARD drive on it.

  I bought a computer laptop gateway I believe it has windows vista but it has locking password on that HARD drive can I buy windows 8 or 8.1 and download on it. Also it allows me to run any cd what can do?

  * Original title: laptop computer purchase

  Hello

  I suggest that you either get the password from the seller or return the laptop to the seller and get a refund.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Laptop HP DM1 - possible to update SSD hard drive?

  I have a laptop DM1, very slow.  Just wondering if it is possible to upgrade the hard drive to SSD - which means it'll work.   Went through the plug technique, said he can only support 320 GB hard drive (which is weird), but the SSD come as low as 64 GB, so that's fine.  I've already updated the ram to 2 GB, but it is still slow.

  See page 45 of the HP DM1 Service Manual here:

  Your manual

  It has an easy access door and uses the 9.5 or 7 mm thickness SATA drives and standard of 2.5 inches wide, so it will not be a problem to upgrade to an SSD. After if you need assistance with migration/relocation of software or select a good reasonably priced at SSDS.

• Computer that crashed; System Restore which threaten to wipe hard drive

  Hi all

  Today my laptop crashed. So I disconnected and tried to turn it off completely. He got to "shutting down" but does not move, so I had to leave the exhausted battery. Then I rebooted from recovery, is DVD went in safe mode and try to run the system restore. I now have a message saying:

  Packard Bell Recovery DVD!

  WARNING

  ALL THE DATA ON YOUR HARD DRIVE WILL BE ERASED

  [OK]

  There is no Cancel button or anything, just an OK button. They can't be serious, can they? (And I've read since that run the system on a disk restore is a bad idea). It seems I have to press OK or let the battery die again, either disconnect the battery. What should I do?

  Anon

  First disconnect the battery. Now, to get into the mode safe on the hard drive of your computer.  start to boot and then press F8, and then select Safe mode.  Then you can try restoring the system from there. vader95 Windows 95-7 office 97 - 2010 Ubuntu 9.10 - 10.10