Computer HP Pavilion DV5000 laptop will not turn on or off

Similar Questions

• Pavilion dv9810us: computer HP Pavilion dv9810us laptop will not start

  Reminder: a few days before my laptop does not start up, all using the laptop, the screen has become, I guess the technical term would be 'nuts': horizontal lines an inch in height, made of blocks quickly black and white, all changing left and right, and I could see my spreadsheet in the background.  Could not do something about the problem, so I rebooted and it worked fine.

  Then a few days after that, I tried to turn on my laptop, and occurred the following:

  (1) blue illuminated switch, control all the keys lit in blue (volume, skip, repeat, DVD...), fan began and heard the dvd begins to check for a disc.  This lasted for about 2 seconds.

  (2) off laptop (all lights extinguished, no fan noise or a dvd).  This lasted for about 5 seconds.

  then it would just repeat steps 1 & 2 times: start 2 seconds, stop for 5...

  Steps that my work to correct (without success):

  -J' I disconnected and removed the battery.  Let stand a few minutes.  After I have inserted the battery and reconnected, I pressed the power button.  Same 2 steps as shown above (lit for 2 seconds, turn off for 5, repetition) happened.

  -saw a post on the site of HP on a hard reset.  so I unplugged, removed the battery, which is held from the Start button / stop for 20 seconds.  then replugged (without inserting the battery) and power on.  Same 2 steps above happened (lit for 2 seconds, off for 5, repetition...).

  -J' I reset memory as someone on the HP Board has suggested:

  (1) remove the two memory, then replace both in the correct order.

  Result: same problem (2 seconds 5 seconds, repeat...)

  (2) remove the top memory (1 GB), bottom (2 GB) by leaving in place.

  Result: same problem...

  (3) place 1 GB memory on the bottom, nothing over the top.

  Result: same problem...

  From the above information, no idea what the source of the problem is, and how to fix it?

  It would be to remove the motherboard and "re-invest" the video chip with a heat gun. Configure you with a shield from sheet aluminium with the chip pushing through like dessert in a TV dinner. There are many tutorials online, but like anything else go you better the more you do and the first time is risky. Repair shops using a better process called "reballing", which is basically rebuild the chip and requires hardware, that no individual can afford to have.

  Access to the old hard drive is easy. Physically, remove it from the machine.

  https://www.YouTube.com/watch?v=B3tAGVzCS7w

  See 02:20 in. You must remove the plastic adapter for in standard SATA ports. You can leave it in the basket after removing the plastic adapter bar. Then use a usb to SATA adapter and you can plug the old drive on USB ports on your computer again, and it will appear as a USB key where you can copy and paste things out of it to the new PC.

  http://www.Amazon.com/STARTech-com-SATA-drive-adapter-cable/DP/B00HJZJI84/ref=sr_1_1?ie=UTF8&QID=1432146725&SR=8-1&keywords=USB+to+SATA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Facetracking on computer Dell Inspiron 15 laptop will not turn off!

  It's the tick in the box 'face tracking' and I press the box down,
  but it won't come off.
  Help!
  my webcam keeps zooming now, no reason

  Rather than try to uncheck the 'bubble' facetracking, check the pan and zoom "bubble". I had the same problem for a while hope this helps

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• My laptop will not turn off...

  My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

  Hello

  ·         This happens even when the power chord is connected?

  ·         What is the brand and model of the laptop?

  Method 1:

  I suggest you to check the power settings on your laptop in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 3:

  I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Check out these links for help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

  Kind regards

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario

• Laptop will not turn on or charge

  My laptop only turns on when I press the power button. It will be not too to recharge the battery. I've had this phone for almost 2 years now, a this is the first time I have had this problem. I tried removing the battery and pressing the power for 30 seconds. I don't know if I need to replace the battery.

  My laptop is Windows 7 Home premium.

  How can I solve this problem?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• HP Jet 11: Computer flow 11 Hp laptop will not charge

  In two or three weeks, I noticed my flow specifications 11 HP does not load when it is plugged in - it always says "plugged not supported."

  Other threads that I've read it seems that this could be something to do with the installation of Windows 10 (which failed, incidentally, that he was apparently not enough space, even if the laptop is almost nine!).

  There was also a problem with the closure, which seems to have rectified earlier today; the power light remained on the same where I had been through the complete shutdown procedure. I have restored factory settings and this seems to have solved this problem but still the laptop won't charge, and even now I'm not convinced that it does not lose battery when it is off.

  I did a battery check with HP Support Assistant, and who says the battery is 'OK' - it loads also for a few seconds when the control runs, which makes things more frustrating. I'm getting now worried because the battery is now down to 21%

  I don't am not very focused on technique, then, what do I do? The laptop is still under warranty for even a few weeks.

  (As the current state of things I feel very indisposed to bother with products HP or Microsoft, in the future, if I thought that HP were great).

  I would be really grateful for any help at all.

  Thanks in advance.

  Hello @beanbarrel87,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the battery issue and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, try to review the following document and let me know how it goes:

  HP laptops - battery not power Notebook or hold a Charge

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Computer HP pavilion dv6500 laptop does not read or play media, error code 31

  I have hp pavilion dv6500 laptop, - my dvd do not read or play - I went to Device Manager and opened it and it says the drivers required for this device-code 31.le how to fix it, please

  * original title - adapter #4-31 the code *.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Classic classic BlackBerry frozen during the update and will not turn on or off

  So I was in a wifi zone in a fast food place, and my screen said that I had to update software and because I would be there for some time, I allowed him. He said to date started and then told me that I had to be plugged in for the update, but I didn't have my charger. I don't remember if it continued on its own or if I hit just OK but now it is frozen on the ATT screen and will not shut off/on/restart. If I press and hold the off button, it counts down as if she died but do nothing and I can't use the touch screen to cancel or restart.

  I am very frustrated because I've had problems with this phone since I got less than 2 months ago.

  In addition, he is now connected and still will not do anything else.

• shows ok to disconnect, but will not turn on or off

  iPod classic display ok to disconnect but used to turn on or off as his dead end

  Reset the unit. See also Re: corrupted iPod classic.

  TT2

• Sometimes my laptop will not turn on and sometimes it will.and when his after awhile it turns just off the coast, and not coming back.

  The other day I was on my online when all of a sudden it turned off completely.i just tried to turn it back on and nothing happens no lights, nothing! The next day, I tried and it works, then when I tried to move my laptop it off. So the problem is that sometimes it will come on and sometimes he used. Help! PLEASE, I BEG YOU!

  Download the repaired hardware.  A computer from start and then not actually making... This might be the operating system.  However, your description is... material Pre-os.

• My HP Pavilion dm3 laptop will not log

  Although I can't turn on my laptop, I can't log on. Whenever I get in the newspaper on the page and type in my password I am presented with the messge ' the user profile service service has no logon. User profile cannot be loaded. "The only option is to then click OK, but it disconnects me and then I'll be back in the newspaper to the page once more.

  Does anyone know what I can do? Thank you!

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Pavilion dv9700: laptop does not turn on but lights flash

  I have a Pavilion DV9700, service tag dv9925r. When I turn on the power, the power led and the led on top flash, I can hear the fan and drive spinning, but the screen stays black and after one or two seconds the lights out, but then continue to Flash on then close. When, I hear the fan running.

  What I've tried;

  Hung still no display on an external monitor

  Removed and reinstall the memory and hard drive, not good.

  Tried the hard reset, not good.

  I put another hard drive just to see if the disc was not, but no difference.

  There is no audible beeps at all. It does not seem to go through the checkpoint.

  The laptop is dead?

  If this document does not help, contact the HP support directly using the link that I have referred to in the document I have provided.