My HP Pavilion dm3 laptop will not log

Similar Questions

• Pavilion dv9810us: computer HP Pavilion dv9810us laptop will not start

  Reminder: a few days before my laptop does not start up, all using the laptop, the screen has become, I guess the technical term would be 'nuts': horizontal lines an inch in height, made of blocks quickly black and white, all changing left and right, and I could see my spreadsheet in the background.  Could not do something about the problem, so I rebooted and it worked fine.

  Then a few days after that, I tried to turn on my laptop, and occurred the following:

  (1) blue illuminated switch, control all the keys lit in blue (volume, skip, repeat, DVD...), fan began and heard the dvd begins to check for a disc.  This lasted for about 2 seconds.

  (2) off laptop (all lights extinguished, no fan noise or a dvd).  This lasted for about 5 seconds.

  then it would just repeat steps 1 & 2 times: start 2 seconds, stop for 5...

  Steps that my work to correct (without success):

  -J' I disconnected and removed the battery.  Let stand a few minutes.  After I have inserted the battery and reconnected, I pressed the power button.  Same 2 steps as shown above (lit for 2 seconds, turn off for 5, repetition) happened.

  -saw a post on the site of HP on a hard reset.  so I unplugged, removed the battery, which is held from the Start button / stop for 20 seconds.  then replugged (without inserting the battery) and power on.  Same 2 steps above happened (lit for 2 seconds, off for 5, repetition...).

  -J' I reset memory as someone on the HP Board has suggested:

  (1) remove the two memory, then replace both in the correct order.

  Result: same problem (2 seconds 5 seconds, repeat...)

  (2) remove the top memory (1 GB), bottom (2 GB) by leaving in place.

  Result: same problem...

  (3) place 1 GB memory on the bottom, nothing over the top.

  Result: same problem...

  From the above information, no idea what the source of the problem is, and how to fix it?

  It would be to remove the motherboard and "re-invest" the video chip with a heat gun. Configure you with a shield from sheet aluminium with the chip pushing through like dessert in a TV dinner. There are many tutorials online, but like anything else go you better the more you do and the first time is risky. Repair shops using a better process called "reballing", which is basically rebuild the chip and requires hardware, that no individual can afford to have.

  Access to the old hard drive is easy. Physically, remove it from the machine.

  https://www.YouTube.com/watch?v=B3tAGVzCS7w

  See 02:20 in. You must remove the plastic adapter for in standard SATA ports. You can leave it in the basket after removing the plastic adapter bar. Then use a usb to SATA adapter and you can plug the old drive on USB ports on your computer again, and it will appear as a USB key where you can copy and paste things out of it to the new PC.

  http://www.Amazon.com/STARTech-com-SATA-drive-adapter-cable/DP/B00HJZJI84/ref=sr_1_1?ie=UTF8&QID=1432146725&SR=8-1&keywords=USB+to+SATA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion zd8398ea: laptop will not be upgraded to win7 Win10

  My mavhine has been upgraded to Windows 7 service pack 1.  He is current with the updates of Windows 7.  I Win 10 App display, but he informs me that in can not be upgraded tp win 10 because there is a compatibility issue with the ATI RAdeon x 600: 'the display manufacturer did not Win 10-compatible screen.

  How compatible ATI Radeon please?

  Thanks for that - sounds encouraging.  I'm not near my laptop at the moment, but will certainly do as you suggest.  Thank you very much indeed - much appreciated!

  Mike

• Computer HP Pavilion DV5000 laptop will not turn on or off

  This laptop is used every day and worked perfectly until this morning.

  I have attached the power cable and it works, but the screen remains blank. All lights normal power along the upper part of the keyboard are light, but that's all. The blue light along the front flashes.

  When I try to turn off the power by pressing the power button, nothing happens. The lighting and the computer does not turn off.

  Oddly, when I unplug the power cord, fires off - but only then.

  I tried to boot from the DVD drive without result.

  Any help would be very appreciated to get my laptop running and upward.

  In the absence of any other advice or suggestions, I decided to try to clear the CMOS memory. In the process, I discovered that the RTC battery was bad, so I replaced it with a battery in good condition and Hey Presto! -l' computer is now back up and functioning normally. Happy days!

• HP F023WM: My HP laptop will not load after, log.

  My HP laptop will not load after login

  Lights well, once I connect it just shows a black screen with cursor.

  Help, please

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• my laptop will not import my photos and my itunes doesn't sync new music

  I'm not sure that the question is my Iphone 5 or the laptop. When I plug my phone both the laptop and the phone between them pick up and my phone syncs automatically, however, my phone always wonder if I want to import new photos and then once I clicked on Yes, it says that no pictures are available. Also when you try to import pictures on an app on the phone, he could not pick up one of my recent photos.

  As well as what I downloaded some new music on my itunes on my laptop, however, given that I brought music apple songs downloaded on my itunes on my laptop will not sync and I don't know why. The phone syncs and always put my new music on the phone when it syncs, but it's their import is no longer automatically.

  Thanks for any help in advance.

  You can copy photos manually from the film. It might sound like a somewhat random Folders collection.

  With Apple active any music that you add to your library becomes automatically available for you to download or listen to on your device. Music sync via USB, however.

  TT2

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• laptop will not print, the problem is PRINTUI. Missing DLL

  Hello. My computer Windows XP laptop will not print, and I found that the problem is PRINTUI. DLL is missing. I have a backup file on my hard drive, but I don't know which folder the file goes to. I have Windows XP Home edition SP2. Does anyone know the correct folder, that this file will?

  Hi, Jtmcc,

  Adding printers without interaction from the user in Windows

  http://support.Microsoft.com/kb/189105

  Is the common path: C:\ System32\ printui.dll WINDOWS\

  What is printui.dll?

  http://DLL.ParetoLogic.com/detail.php/printui

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my laptop will not be closed. I have xp proffessional__

  my laptop will not be closed. I have xp proffessional OS

  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

  Utilities for Windows XP stops
  http://aumha.org/win5/a/shtdwnxp.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support