computer ignoring C:

Similar Questions

• I keep trying to find ways to update all my drivers at a time, as many problems with this computer

  ORIGINAL TITLE: update drivers, fixing problems, etc. NOTHING WORKS.

  I keep trying to find ways to update all my drivers at a time. There are so many problems with this computer, I'm so frustrated and things on it, I have to PAY TO ASK a QUESTION FOR CUSTOMER SUPPORT. Seriously, I'll blow my head because this trash is so UN-easy to use.

  Is - it really too much to ask for a single ' difficulty my * ing of the computer problems "button?

  Here is a list of what specifically is messed up. I don't want to spe backspace to show what I mean.

  I type really fast and never skip a key. Howeer, the computer ignores the keys as in the words "SPE" and "howeer" I typed jut. Now it's "jut" instead of "right".

  So, there is a problem that should not be happenng.

  Secondly, I play some games including the [scroll] scrolling bar on the frame-inmousepad does not work, period. 2011-2012 release, so it's something I can't fix on mymouse of course. I tried fixing it, and he says he successfully fixed wa. LOL no, it wasn't, it's just * ed even more.

  I refuse to poor a ton money int. f fixing these problems because I simply don't trust they're going to fix anything, and these problems should not occur initially.

  k so bye, go go rifle my brain of becaue it's so rustrating.

  Hello
   

  1. does come with any specific application?

  2. who is the manufacturer of the computer?

  3 did you changes to the computer?

  Keyboard problem:
  Method 1: Try with the keyboard on the screen and see if it helps.
  
  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard
  Method 2:
  Check if the problem persists in safe mode with network, to start the computer in safe mode, follow the below mentioned article:
  
  Link, please refer to: start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• NetBook NB100: Black screen after Toshiba leading innovation

  It occurs something strange with my N-100 Netbook.

  It has always worked perfectly, but today, when I try to initiate, it appears on-screen typical 'Innovation leader Toshiba', but then the screen goes black, and do not appear "windows". I hear a sort of high-pitched noise inside your computer.

  I'm not exactly good computers and I tried pressing F2 and look at the different options, but none of them was not like the solution, and I'm afraid I can ruin my computer (I mean, even more) with my computer ignorance.

  Did someone knows what can happen? I'm completely hopeless!

  now fix this = solve my life XD
  Thank you very much!
  Gracies!

  Hello

  Are you able to press F8 while the laptop is turned on?
  To do this and check if you can choose the option repair my computer, then the HARD drive recovery.

  You should also check the BIOS.
  Immediately after pressing the power button, press F2. This allows you to access the BIOS. You can then check if the HARD drive is recognized.

  Sorry mate but it of difficult to say what's wrong here

• Satellite L300, how to start from the cd/dvd external USB drive?

  I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
  I would like to start on a connected external USB CD/DVD player
  PROBLEM:
  BIOS will not start on this CD/DVD disc.
  In the BIOS boot priority is: CD/DVD, USB, HDD
  BEHAVIOR:
  When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
  QUESTION:
  Is it possible at all boot for CD/DVD USB external?

  Thanks for the efforts made to respond.
  Concerning

  It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

• Re: BSOD play WoW on Satellite A300

  I played WoW yesterday and my computer froze. (This is the first time, it never happened)

  After that I reset the phone and scanned computer for a virus and didn't find any.
  Connected to the net and has started again, playing about 20 minutes later, it froze once more and when I turned it back on it went to the very scary blue screen of death.

  Since then, I have try using the back up CD that came with the laptop, unfortunately it does not work.
  No matter what I do the computer ignores it and heads straight for the BSoD...
  I have no idea what to do, I have no options to choose Safe mode or anything.

  Does anyone have any help full information?

  (Either way, it's a Toshiba A300)

  Not so easy to find a solution to this problem without the BSOD code, as said Akuma.

  Did you change or update a driver? If you did that, maybe that's the problem.

  You can test your RAM or a HARD drive with special tools.
  For the use of the Memtest86 RAM of [www.memtest86.org]. Download and burn to a CD. From this CD, you can start and check the RAM.
  For the use of drive HARD Hitachi Drive Fitness Test [www.hitachigst.com]. Alternatively, you can boot from a CD.

• Sound system seems to have failed

  I am relatively computer ignorant.
  My audio system seems to have failed, but I still get sound when I turn on my computer stating that my soundcard still works.

  Well anyone give advice?

  Hello

  It would be useful to know which machine you have, because to say the members of the forum a problem isn't always enough... ;)

  Greetings

• Can't stop "standby" mode. HP Pavilion 2111us-g6. Windows 7 64 bit.

  HP Pavilion g6-2111us.

  Windows 7 64-bit.

  Set up with an ID of administrator and user two identifiers that require a password to connect.

  Computer goes into hibernation during the (provided by Cox) McAfee virus scan.  Tried to create the power of scanning only management plan.  Tried to change the recommended power HP plan. Tried scanning in the administrator ID.  In all cases the computer ignores the settings and falls asleep.  Firstly, the screen goes black, then the laptop on the USB LED fan cooler matrices is.  Now, he's asleep.  I hit the button ENTER and the user login screen.  I connect and the scan continues.  The first time it happened I left running the scan and returns a few hours later and the scan was started.  The only way I found to a full scan is by sitting in front of the computer and hitting the key enter every time the screen goes black.  It prevents switch to "standby" mode and the analysis ends in just over an hour.

  How can I prevent the computer asleep then the scan will finish without supervision.  I was able to do it on the laptop of HP running Vista that I used five years before it crashed and I replaced it with this one.

  Great, I'm glad that you were able to get the problem fixed!

• HP Touchsmart 600 - remote control issues

  I have 3 questions on the remote control for my HP TouchSmart 600, which works well for almost 4 years (not jinxies).

  #1 can no longer change the channel of the program guide.

  When I press the Guide button, the TV guide is displayed as expected. I can page up/down through the guide but when I press the button (the Center button on the remote control) to switch to the selected channel, it takes me to the library menu and position myself to the TV option saved rather than change the channel. He used to work. Note: I did take the trouble to restart the Live TV app like this seems to require to reach for the mouse.

  What I did or I'm doing wrong?

  #2 remote to 'enlarge' / 'restore down '.

  Is it possible to use the remote control to "enlarge" / "restore" in the Live TV window? Currently, I do it with my mouse.

  #3 remote sometimes loses focus

  I have never been able to identify, but the remote sometimes seems to lose focus. By this, I mean that it is as if the computer ignores all of a sudden. For example, many times I press the Guide button, the TV guide will go up but the up / keys does not work. I see that the computer receives the infrared signal because the blue light on the front flashes whenever I press a button on the remote control. Finally, after having rejected the guide and press different buttons on the remote control in a crazy attempt to clear the confusion, the remote control starts actually behave as expected.

  Advice would be appreciated.

  Thank you.

  Hi ou81aswell,.

  #1: looks like your remote can give wrong signals.  Have you tried restarting the computer?

  #2: no, the remote doesn't have this feature.  You will need to use the mouse

  #3: I've noticed that sometimes windows pop ups will steal focus from Media Center.  I found that by pushing the round button of Media Green Center of the remote control will take back you in Media Center.

• Menu of startup appears but does nothing

  I have a desktop HP 110-210.

  I'm trying to boot into the BIOS.

  I hit Esc repeatedly receive cycle power and get the menu starting with F1 = Sysinfo,...  F10 = BIOS, etc., but the computer ignores all every F button I press.

  Boots of Ctrl-Alt-Del for windows.

  Enter Boos to windows.

  Everything else is ignored

  I finally thought to it.  This computer requires OEM keyboard to access the BIOS.  F10 on my ergonomic keyboard should send a different code than the HP keyboard.

• Gateway gt5656 bios update

  trying to update my bios.  Gateway gt5656, download files, cleta cd computer ignores cd starts normally, double-click autoexec in download download screen requesting the update of the bios, enter 1, poster for a split second then disappears.  Help

  http://support.gateway.com/support/default.aspx

  Contact Support for gateway to the link above for advice on how to solve this problem,

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrade a Dell Dimension 9200 360 GB Raid to 2 TB hard drive

  Hello

  I have tried this modernization and taken on drives of 160 GB 1 and put in disk 2 TB and started the PC and it did not work I tried 2 different locations.

  Can someone help me by telling me what I have to do

  to install disk 2 TB on my Vista PC running.

  I need to install my dell Vista-CD/CD?

  your help will be greatly appreciated

  Assuming you have RAID 0, RAID was probably set up to be the bootable hard drive.  If you delete one of the disks, your RAID will be completely disabled and the computer will not start.  The Dimension 9200 has six SATA ports, two upward by themselves and four other together towards the middle of the main map.  When one of these machines has been ordered with RAID Dell normally placed disks RAID on the third SATA ports and fourth, leaving the first two either vacuum or place the DVD/CD drive on the second of the two ports that reach by themselves next to the power supply.  You should be able to add your Board of 2 TB in two ways; Place it in one of the two ports next to food, or use one of the either the port of fifth or sixth sitting by the RAID.

  Once you have the new drive installed mechanically, restart the computer and use F2 during the self-test to reach the configuration of the system.  This page shows the BIOS how you want the computer to deal with its various devices.  Go to the screen that shows all your SATA devices and make sure that the port with your new hard drive is turned on.  If you skip this step the computer ignores your new drive.  Once you have done this and left the installation of the system, you will need to find the disk on your computer Manager so that you can initialize, partition and format the new drive.  You must configure a partition, even if you want to use the entire disk as one partition before you can format.

  A word of caution: computers some Dell's have some difficulties to accept a hard drive placed on a track numbered higher than the DVD/CD drive.  If you use the ports by the RAID drives and find you have problems using the new hard disk, you will need to plug it into the port of the first or second, depending on which is not used by the DVD/CD drive.  The RAID drives are not normally affected by this problem because they are managed by the ROM of RAID Intel and the computer does not see them as a SATA hard drive.

• Share the printer for 64 bit with 32-bit system

  I have a new HP Vista 64 bit with a HP deskjet 5150 printer system.  I want to share with a hp windows XP 32 bits of the system.  I see the printer from the 32-bit system but does not print to it.  I tried to load the 32-bit driver on the 64 bit system and could not do.  I tried to load the 64 bit 32 bit system driver and does not...  I didn't chance to find answers in the other boards except they usually referring to the fact that it is possible.

  I can share files without problem.  Any solution?  Thanks for any help

  I found my own answer and thought I should share.

  Hi guys
  I hope that this could help save a bit of research and serious puzzle.

  I have a native machine to Vista X 64 bit with some printers on it with 64-bit drivers, but still need to connect / access these printers on some machines to Windows XP bit (32).

  "You cam't use the usual thing to set up a local since tcpip port drivers 32-bit installs not on the 64-bit computer, and in all cases, you will get - driver invalid for this OS" or an equivalent message.

  In any case, here's how - simple when you know how, but it took me FOREVER to find the answer.

  (1) make sure that on the remote computer if ensure that you have enabled sharing so you can access the device remotely on your network printer.

  (2) Please make sure you have the correct native drivers installed on your XP machine.

  (3) in the new printer ADD Wizard (Panel) set up LOCAL printer add ATTACHED to THIS COMPUTER (ignore the fact that it is on the remote machine) and uncheck the automatically search plug-and-play devices.

  We're going to 'Poodlefake' the remote printer to think that it is actually attached to the 32-bit machine this is why you must have the correct driver installed on the 32-bit computer.

  (4) now, click NEXT. Create a new port-LOCAL port type online. Click next

  (5) on the next screen, you will need to enter a port name.
  What you have to do here, is to enter the \\computername\sharename
  for example, if your remote computer is studionetwork and that you have shared the printer as epson1290
  then enter here \\studionetwork\epson1290

  (6) you will get a prompt (on the XP machine) which driver you want to use - because you have already installed the drivers then just scroll down until you see the correct printer.

  -That's just mainly a test page and it works - your pilot will be just 'Pass through' 64-bit machine.

  TOU will not however in most cases be able to recover data from the printer such as the levels of ink etc. You will have to do it on the remote computer.

  Hope this helps - I know a lot of people are upgrading machines now - then you might have a certain 32 / 64-bit mixed environments and of course some older printers will not even 64-bit drivers.

  Note that this works as well - reverse your computer 64 bit VISTA or Windows 7 can use a printer connected to a 32-bit computer. Do in the same way.

• My Acer desktop computer (approx. 1 year) ignores the key when entering. It got so bad that I am ready to t

  My Acer desktop computer (about 1 year) X1420G-U5832 ignores the letters when typing. He got one so bad that I'm ready to throw on this computer and try again. I replaced the acer with a logitech keyboard and it does the same thing. Is there a cure for this. Help, please!

  Have you tried to plug it into another USB port?

  May be a corrupted driver. Can be a good download and reinstall.

  Edit: Pilot would be looking for drivers on whatever OS you have installed the site.

• Clip Zip ignores certain songs and blocks computer when disconnected

  OK, I tried to find a solution to my problem but I've not seen everything that has been resolved or the same problem, I have.  I use a Windows 7 desktop computer and have a 4 GB Clip Zip purple.  My main problem is that the music I downloaded from eMusic and transferred through Windows Media Player. The songs will sometimes play on the Zip Clip.  I say sometimes because random entire albums or a song or two in an album will not play.  These are your Mbit/s MP3 files average 4-5 MB, 192, with no DRM.  Has anyone identified a solution?  I reformatted, reinstalled the firmware and done everything short of reformat the songs into something else.

  In addition, from time to time if I disconnect the zip clip this computer freezes and I have to do a hard reboot.  Has anyone else encountered this problem?  I have to tell Windows to eject?

  No worries, glad you got it running.  Sometimes, Windows Media Player may have problems with transfers.  Fortunately, it is not too often.  Use the MSC mode, you have the somplete of transfer control, and the device is seen by the computer as a mass storage device.  As long as your files have incorporated album covers, the Zip will use these images and everything will be fine.

  MTP mode is a 'virtual' layer on MSC, where the player is addressed as a media device.  As a result, a lot of things is automated in the background.  Album art is sent to a special 'albums' folder and other information, such as sure clock and device Clip Zip ID are available for DRM purposes (multimedia protected) if necessary.  Oh, playlisting with .pla format lists is also possible - these lists are not specific to the path as MSC, which means that even if the file is located on the microSD card and records is not serious.

  Windows Media Player is happy with two modes, by the way.

  With the Zip Clip, the USB controller manages only one mode at a time to access.  It is probably the fancy that causes more confusion.  If you transfer a file in a mode, then go to the other, the files that you have transferred to the other mode will be not visible from the computer, even if the Zip Clip itself can see both.  For this reason, we recommend that people choose a mode and stick with it, so that you can access all of the computer.

  Oh, one final thought-Yes, you can simply drag and drop your music files in the music folder, and the player will locate based on the ID3 tags (album / artist / genre / song).  For podcasts or audio books, you can drag the files in these folders, giving you additional functions for these files (elapsed time, the playback speed).

  Bob

• When I plan the registry defragmentation and compaction on my Asus computer, it starts and ignores all the hives

  When I plan the registry defragmentation and compaction on my Asus computer and restart it to all it will do is start the process as my computer starts and then it passes all of the hives. How can I fix it. I am using windows 7 Home premium 64-bit.

  Original title: compacting registry

  to activate the registry defragmentation and compaction: go to start then run, type msconfig and click on the Startup tab.

  Choose Safeboot (mininimal), and then restart the computer.

  The computer will restart in safe mode, just let it run through the process; If you have a regular dskchk, let this race as usual and let the computer restart, the reg defragmentation etc, should operate normally after that. Remember once the computer has restarted in safe mode and you're on the office just repeat the msconfig but uncheck the boot in the safe mode option, and then restart Windows normally.