computer keeps restarting, against all odds, while I browse the internet

Similar Questions

• Computer keeps restarting, after installation of the SP3 for Windows XP.

  After you install sp3 for windows XP my computer keeps restarting. I have difficulties to find the patch that corrects this can someone help?

  Original title: sp3 problem with AMD processors

  Well, with this description, you might want to look at this:

  http://support.Microsoft.com/kb/953356

• Computer keeps restarting, blue screen after windows logo.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  =========================
  Not much help I guess... but maybe the
  This article offers a few ideas:

  (330182) how to troubleshoot a stop
  error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  John Inzer - MS - MVP - digital media experience

• Created at 7 elements photo albums. Made a backup file I imported into 14 items. Against all odds, the albums do not appear in the Organizer 14 Adobe elements. What is the solution to the problem?

  Created at 7 elements photo albums. Made a backup file I imported into 14 items. Against all odds, the albums do not appear in the Organizer 14 Adobe elements. What is the solution to the problem?

  johand61702707 wrote:

  Created at 7 elements photo albums. Made a backup file I imported into 14 items. Against all odds, the albums do not appear in the Organizer 14 Adobe elements. What is the solution to the problem?

  It was to be expected if you have made a backup from external software instead of using the recommendations of backup / restore of the Organizer:

  https://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html

  If you "import" the backup made by other software, you can only retrieve the metadata that you have voluntarily registered in the metadata section of your files.

  The albums are NOT written in the files. They are lists of files stored in the catalog, like playlists for audio.

  Because it is saved in the catalog, you have to run the process described above to retrieve the catalog or (if you install on the same computer) to 'convert' catalog.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• When browsing the internet I get the pop-up windows telling me that my computer is infected "bestantivirus2011."

  original title: bestantivirus2011

  Occasionally, when browsing the internet, I get a popup telling me that my computer is infected. Then it executes an ASNA and comes up with a long list of malware. When I click on remove all he wants me to install a file called "bestantivirus2011". research tells me that it is a scam. How can I remove it from my computer?

  Thank you, Jim B

  Hi, Rkill install and run. Do not restart or close Rkill.

  http://download.bleepingcomputer.com/grinler/rkill.com

  Install and scan with malwarebytes and remove any file that's find.

  http://www.Malwarebytes.org/MBAM.php

  Copy/old newspaper of malware in your next post.

• HP 15-f003dx: robotic sound on laptop while listening to music and browsing the Internet

  Hello

  I have a HP 15-f003dx and I have problems with the audio driver. Whenever I watch videos or listen to music while browsing the Internet, everything looks like a robot, and it's really bad. I already reinstalled the driver, updated the BIOS and tried the system restore and reformatted. Nothing else has worked.

  Here are my specs below:

  10 64-Bit Windows Home

  Processor: AMD A6 - 5200 APU with Radeon HD graphics card

  8 GB RAM

  Audio: Realtek High Definition Audio

  I'm running out of options. All the solutions to the current problem would be great, thanks.

  Hi @REL1983,

  Thank you for the update.

  I'm glad that the store has been able to solve the problem for you.

  Execution of the troubleshooter is a step I have provided, if you agree that it is your problem, you would be useful to the community by choosing accepted the solution to enable other posters locate information with greater ease.

  Thanks in advance.

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• My computer keeps restarting randomly without reason

  By chance I use my computer when it sound suddenly decides to freeze, the screen goes black and it restarts.

  It's a laptop, a HP Pavilion dv6000.

  The thing that sucks that he keeps always in the most inconvenient time. In addition, it seems to happen most often when I open a program or series of programs.

  Hi Icicle167,
  

  Since when are you facing this problem?

  
  Method 1: run the fixit available in the links below and check if that makes a difference-Worth to try
  
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• My computer keeps restarting.

  OK, the computer used to work very well. Since a few months now whenever I am playing a game or a video or simply using the computer it restarts randomly. As far as I know all the software are up to date. Nothing is in conflict with other hardware or software. It becomes more frustrating. Help would be apreciated.

  Hi Josh91,

  1. you receive an error message when the computer restarts?

  2. did you of recent changes on the computer?

  I suggest that you check in the event viewer to find out the cause of the issue and after return with details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer keeps restarting with a driver failure

  I have a laptop Acer Aspire that I have had for about 9 months. I've noticed a few problems over the last 4 months with this computer. It keeps restarting now. Sometimes after it restarts once it starts up perfectly fine but other times he keeps just restarting without end I tried to do a clean boot, cleaning the registry, the chkdsk, the sfc and update the display driver (since sometimes random color banding appears on the screen instead of a reboot or the Office would just go crooked with lines paralyzed at startup programs open to the top or icons). But im still getting the same problem and recently I got a blue screen on a driver failure.

  These are the details that I received from whocrashed:
  crash dump file: C:\Windows\Minidump\101713-49764-01.dmp
  Uptime: 03:29:14
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8007855A10, 0xFFFFF800064223D8, 0xFFFFFA8006974880)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.
  Any help will be appreciated

  S

  There was only a single file DMP here

  Your other machine crash is connected to AODDriver2.sys AMD OverDrive Service pilot from Advanced Micro Devices.

  I would like to re - install the most recent driver available (even if the same date) and if you're overclocking STOP

  In addition I would like to remove and replace Kaspersky with MSE

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

• McAfee Firewall will stay not on; Cannot turn on the firewall of Windows 7; Computer keeps restarting; and I can't access a file because my computer says I don't have permission

  I use McAfee Firewall as my firewall.  Now when I try to turn it on, it continues for less than a second, then turns off.  Firewall Windows also not be.

  My computer rebooting in itself guard so I can't complete a virus scan.  In one place, he suggested I have try in Safe Mode, but it didn't work (and he told me that it did not work because I couldn't connect to the internet).  I tried "Safe Mode with networking" and he would not even let me scan.

  Another thing, the last time that I tried to scan it got stuck on "Internet C:\Windows\SysWOW64A\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary / / Desktop.ini.  This makes me think that this could be the problem, so I tried to get him to put the file in "VirusTotal.  I was able to get to him before that I got the idea to put it in "VirusTotal" but now it won't let me and he says:

  "You don't have currently not allowed to access this folder."

  "Click Conitnue to have permanent access to this folder."

  When I try to click on "Continue", it only ever through.

  I tried to change the 'Owner' under 'Security' tab but it still doesn't work, so I can't check to see if the file is a virus.

  Should I try to download a new antivirus program to scan my computer?

  Sorry if this is in the wrong category.  I have so many problems, it is not easy to categorize.

  Uninstalling McAfee completely.

  Do not use any product that claims to make your computer run better.  Almost all of them are either false, themselves, an infection, or put your computer at risk. Delete everything that claims to be there to prevent the infections or pretends to make your computer work better, except for the singular than an antivirus product.

  It is a controversial topic, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I pick up after about 150 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.  My clients rarely know infections.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on most of these PCs to date and has never been a problem, and it has been on a course of about 11 months now...  It is a better product than Norton.  It is also cheap. One of the things I love the most about it, is the silence and discretion.  Especially if silenced you its function "portfolio".

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that other components of these products (other than the AV itself) IS causing more problems than any profit that they bring and work mainly by stopping the Windows component that does a very good job of this particular task still.  The problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said, this is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Please note.  You should never have more than one protection software installed.  Always make sure that you completely remove the firmware all protection before installing a new one.  That contains software that may have come preinstalled on your computer when it's new

  Totally impossible to delete most of all AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• the basics of Microsoft Security: keep my pc while I browse the net, he will keep my USB when I connect it?

  microsoft security databases will keep my pc then I'm sailing on the net, he will keep my USB when I connect it?

  Thank you

  answer as soon as possible

  http://www.Microsoft.com/security_essentials/

  http://www.Microsoft.com/security/products/MSE.aspx

  read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.