Computer laptop Tecra M5 keeps typing iiiii without obvious reason

Similar Questions

• trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  Hi Pashley,

  I see you get error 0xc00000e9. I'll help you with this problem.

  1. What is the model number of the computer?

  2. you talk to re - load Windows Vista on Toshiba computer?

  3. How are you trying to re - load Windows Vista?

  4. when exactly you get this error message?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  You can also post this question in the Toshiba Forums: http://forums.computers.toshiba-europe.com/forums/index.jspa

  Thank you.

• Tecra A8 freeze without obvious reason

  We have 15 laptop Tecra A8 in our office, and each of them freezes from time to time.
  There is no exact rule to this gel. Sometimes your laptop freezes three times in an hour and a few times they work without problem for a week or two.

  We believe that this problem is cooling, laptop.
  We tried to solve it with different settings of cooling but the problem persists.

  I noticed that other people on this forum have same problem.
  A person from Toshiba can give us an answer how to solve this problem?

  Hey Buddy,

  why Don t you send machines for a hardwarecheckup to a local servicepartner or at least just a bunch of them? This thing really looks like
  serious and I advise really bring you these machines to a toshiba technician.

  Welcome them

• My computer laptop touch pad keeps freezing

  So I had this problem with my HP laptop for a while now. My mouse freezes randomly when I use my touch pad, make me have to close my laptop and open it again to my touch pad start labor, it might sometimes take awhile to start to get back to work. Someone please tell me what to do this gets really annoying when I have to keep closing my laptop to get my touchpad to stop the freezing point.

  (P.S my mouse works fine when I plug in a mouse, so I know that my touchpad is the promblem here.)

  Hi Chanellex,

  Thank you very much for the product number. I hope you had a good weekend. I included the link to the driver for your TouchPad below. Start by making sure that the original driver is deleted. Go to your device manager and looking for your Synaptics TouchPad or something similar. Right click and uninstall. Then, install the link below. Please, note use this method if you have an external mouse, if you install just the software.

  Synaptics TouchPad Driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-88831-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4308945 & sw_lang=.

  Thank you

• HP pavilion 15-E015TX: my computer laptop touch pad keeps freezing

  I had this problem with my HP laptop for a while now. My mouse freezes randomly when I use my touch pad, please tell me what to do with it.

  Product no: E3B55PA #ACJ

  Operating system: Microsoft windows (64-bit)

  Hello

  Try to download and reinstall the Synaptics TouchPad driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63353.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• Satellite L775 turns off without obvious reason

  I guess it's a problem related to an issue of power.

  My laptop Satellite L775 is used to turn off and the 2nd (under tension) and the 3 leds (drums) becomes red flashing even if I fix the battery.

  How can I solve this problem?

  Your ad is confusing to me.

  Remove the battery and connect the power supply only. What happen exactly when you press the power button / stop?

• Computer laptop G62 keeps freezing

  For the last two days, my laptop G62 - 227 CL keeps freezing once I used it for about 5-10 minutes.  It freezes completely - no cursor movement or response to all keys.  In addition, it freezes any programs I am running.

  However, I am able to use the computer in Mode safe mode with network without any point of freezing (so far; I was in Mode without fail for about 30 minutes).  Unfortunately, I need to use MS Word, which does not work in Mode without failure.

  I use the computer entirely on the current because the battery is pretty much kaput.  Could be the problem?  If so, I'm confused as to how the computer can operate in Mode without failure.  I can't afford a new battery, so I hope that there is just some sort of software problem.

  Is there some kind of diagnosis I can run who can tell me what is the problem, or if anyone else has had this problem?

  Thanks in advance for any help.

  Hello

  You are welcome

  From your description of the issue and the HARD drive error code, it seems that the player is running out - is one of the reasons for which a failing drive will run in Mode safe because it experiences less load (in terms of read/write) when Windows is running in this mode.

  The first thing I recommend is to back up all your personal files etc so that you always have access - lack of readers can be unpredictable.

  Once completed, see if the following is helpful at all.

  Start in Safe Mode, click the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

  If there is no improvement real time this is over, it is probably time to think about replacing the HARD drive - if you want a guide on this procedure, please let me know.

  Kind regards

  DP - K

• computer laptop VAIO keeps restarting

  I bought my computer laptop sony vaio (model SVF15318SNB windows 8TM) April 2014 but on the month of August I have encounter a problem even now the laptop itself keep restart displaying the vaio icon but after restart 5 times or less he launched little windows. Fortunately, windows doesn't crash at all, but after 10 or 30 min it stop and restart itself. So, I look at sony nursery they check the Ram system, control the fan unfortunately, they do not find the specific target, they said that maybe it's the operating system that is causing the problem. Thus, they recover the windows. After recovery, the laptop works fine without problem. But after a few days the problem occur.so I take a recovery action after that and that during the system recovery itself close and restart this worst case is that the windows driver is impossible lock to update the system everything is lock

  I also ran the RAM, hardware scan both he could not find any error. Furthur consultation for the vaio Center care havnt done yet.

  So if there are suggestions please post and I will appreciate it.

  Hello Vishwaschangamayum,

  Thank you for believing in us giving the opportunity to help you.

  I can understand the level of frustration through which you are going. As you mentioned in your post that the problem began in August. Thus, there could be a chance that the problem originated on the Windows Update, released by Microsoft in the same month, as many customers were faced with the same question.

  These types of errors usually occur with a blue on the computer screen, when a serious problem causes Windows 8 to stop or restart unexpectedly. There are several reasons why this type of error occurs on the computer. They occur generally when there is some driver problems in the computer. However, it can be also a few other software/hardware reasons.

  Please refer to the suggestion provided by rvuerinckx replied on August 15, 2014 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• How to fix my computer laptop vaio to restart so I can get to the login screen my sceen is the Windows Boot Manager screen, and I don't have a disk so how can I solve this without disc

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

  Hi Maysambagheri,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. how you try to connect with two computers?

  2. What is the error message that is accurate or complete?

  3. do not connect you to your Windows 7 laptop as administrator?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  For reference:

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Why my laptop keeps closed down without notice?

  Every time when I use my computer laptop just close automatic. But before closing it down hear some loud sounds then just closed. What can repair? Is a hardware or software problem? Thank you and please help...

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  For a laptop on everything that you can do is reinstall the memory and clean the vents (try adding a)
  small fan as a test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ============================================================================

  Using start-up in minimal mode and other methods in this resolution of general performance issues might help.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  .

• C6380 - computer laptop xp prints with connection by usb cable but not wireless

  Hello

  I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

  I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

  I installed the software on a computer vista laptop that is wireless and prints well.

  I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

  I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

  I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

  I put the printer with a static ip address.

  I restarted the router as well.

  The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

  Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

  I'm pretty good with pc / networks etc but have now run out of ideas.

  Can someone help me please?

  Thanks in advance.

  Steve

  Hello

  I've actually solved myself, but I'll keep this post here anyway.

  The answer has been upgraded from SP2 to SP3.

  Probably should have thought about that a little bit earlier!

• Why should I keep the click mouse to keep typing continue offshore assistance

  Keep going off will not be on when you type, have to keep clicking the mouse

  Hi Tweetysweet2,

  1. What do you mean when you say ' keep the click mouse to keep typing "? Is it the cursor jumps around on the page when you type?

  2. using a laptop or desktop?

  3. this happens with all programs?

  4. have you made a recent software or hardware changes to the system?

  Method 1:

  If the cursor jumps constantly as you type, then make sure that the mouse pointer is set to hide when you type. Here are the steps:

  a. click Start, click Control Panel, click Printers and other devicesand then click mouse.

  b. on the Pointer Options tab, under visibility, select the Hide pointer while typing check box.

  For more information, see the article:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_pointer_hide.mspx?mfr=true

  Method 2:

  You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers for the Mouse/touchpad:

  For more information, see the article:

  How to manage devices in Windows XP

  Method 3:

  If the problem persists, try to perform a clean boot, and then check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• I can not connect to my computer laptop bios password said diagnosis is illegal LENGTH

  I have a dell inspiron 1501 and cannot start, computer laptop in any mode, which can make, bed illegal length of password of bios error code.

  Hello

  your question has been answered in your other thread in the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-cant-log-on-to-my-Dell-Inspiron-1501-error-code/53b7ebed-21b2-43BD-B8DF-e96fe3a5675c

  Here is the content of the response;

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  _______________________________________________________

  Contact Dell technical support on BIOS passwords

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

• hard to type on the computer laptop gateway because the letters are jumbled

  When I type an email or a message on Facebook/cat/Word/etc., computer laptop words often arbitrarily and without notice. For an example, I can be typing this sentence and I type the 's' in the sentence it will jump to a line above and continue on from there. This happens so often that it makes it very difficult to complete an e-mail or a message. Even in typing this it stops and I find my cursor to a different location on this page. I checked and the driver software is underway for touchpad and mouse pointing devices. I have a Gateway laptop, NV50A and Windows 7 computer. Please help before I lose my sanity! Thank you!

  Tuesday, October 9, 2012 16:07 + 0000, dabbienormal wrote:

  It remains

  OK, so I think was wrong.

  Ken Blake, Microsoft MVP