computer not recognize the new bootable HDS

Similar Questions

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Computer not recognize the scanner

  My computer suddenly (after several years) only is not recognize my scanner even if I reinstalled several times.  The Solutions Center is also not recognize it or my new printer

  Great, if you have any other questions let me know!

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• 1.60 BIOS does not recognize the USB bootable in Portege Z830

  Hello
  I have a Portege Z830 with BIOS version 1.60. It runs an operating system, ubuntu, (without a windows OS, it is not possible to upgrade the BIOS). I have a USB bootable (debian, created by copying a .iso image using dd) which works on other computers, but not on this one. With the USB at the top of the boot priority, it is not recognized as a device start-up and the computer boots from the HARD drive. The boot is in legacy mode, no UEFI (there is no switch in the menu of the UEFI/legacy BIOS).

  Pointers how to allow a booting from a USB key on this computer?

  Thank you and best regards,

  James

  As you probably know, Toshiba does not support Linux so you can't upgrade the BIOS under Linux OS.
  Also, it is not available to be installed from USB.

  It runs as an application and must be run under Windows running.

• Satellite L305D-S5881 does not recognize the new HARD drive

  Ok. I've had this laptop for a while now.
  It crashed recently. So, I tried to start it up.
  I got "Winload.exe missing or damaged".

  Fortunately, I found an answer to this!
  I got the Vista installation disc and inserted.
  I had this "PAGE_ERROR_IN_NONPAGED_AREA". I fixed too. Stick of 1 GB of RAM to my computer was bad.

  So I replaced it. And during the installation, it hangs. And beeps and undesirable.
  So I thought it was my hard drive. I have a new. (http://www.toshibadirect.com/td/b2c/adet.to?poid=431567 please TAKE a LOOK BEFORE RESPONDING).

  I (try) to install and it does nothing.
  I turn it on and it goes to this page with as my enthernet info. Then I go into the BIOS and it appears. I think I could install it wrong.

  Any help?

  Hello

  I think that the new HARD drive is not recognized, because you have not installed the SATA drivers!
  The new mobile phones support the new SATA controller and especially the drivers are not included in the Windows operating system.

  So, you must first include the SATA drivers before install you the operating system.
  AFAIK the L305D supports an AMD and ATI chipset and SATA drivers must be placed in the ATI graphics driver package.

  On the other hand, you could install the operating system without the use of SATA drivers.
  I think that the BIOS must contain the SATA mode option. Usually it s set to AHCI. Pass this option in compatibility mode and you should be able to install the operating system.

  Cheers mate

• Pavilion Slimline s3120N will not recognize the new video card

  I can't get my computer to recognize and use a new video card. I tried 3 cards (GeForce 8400GS... cards 2different and Radeon HD 4550). The computer continues using the onboard video. For each card, I did the following:

  Go to configuration, advanced and changed the main graphics card 'on board' to 'PCI-E '.

  Saved and let the computer start.

  Stop and insert the new video card into the PCI-E slot

  Start the computer and installed the latest driver

  Computer restarts

  No matter what I do, it always uses the embedded video. I am running Windows 7 Home Premium. How can I use the PCI-E slot/video card? Any suggestions?

  I think that your problem may be the power supply unit (PSU).  The video card that you have installed require a minimum of 300W/350W.  The power supply of your computer is perhaps only 180W; 220W at the most.  You can check by opening the case and by reading the label on.  It's just too much difference for the card to function properly.