Error: "Please insert the disk:" - customer-delivery - ppd.xrm - ms ".

Similar Questions

• "Please insert the disk" drama, but he had to get the USB files

  Hello
  I tried to do some homework and generally save them on my USB disk of 4 GB, up to our days, the car worked well (even when the phone fell off my bed and the USB it folded kind of last night). I went to school and used without any problems at all until a class when I logged on a computer and it told me that the message "insert a disk in the drive removable (E)", I had not thought much of it because the pc to school can be quite slow at times. Went home and have encountered the same problem, had not actually saved a good copy on my laptop so there is mistake no. 1. So I googled the problem found some solutions and none have worked so far, I can understand that it works perhaps not properly because it folds (but could be fixed / back into place, the damage wasn't bad at all).
  Is there anyway that I can my laptop to read the USB so I can extract the files it contains, if I can actually do my homework?
  I'd appreciate any help at all because this assignment due tomorrow and even if it is a heavy task to write again I really want to solve the problem,
  Thank you.

  Your USB may have been permanently damaged.

  Try this program to extract the assignment thereof:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  See you soon.

  Mick Murphy - Microsoft partner

• "Please insert the disk".

  .. .you guessed it, CD is already in the drive.  How humiliating!  Tosh laptop w/Vista, worked fine for years, multi player recognized and always does not play DVD no prob.  Just nothing else than Spinnin ' and failure of proven commercial songs and CD.  Have uninstalled, rebooted, update driver chk, run windows Fixit, lens cleaned... it cannot associate w/all new prog.  Thoughts?  THX.

  Hello

  a. what happens when you insert a CD/DVD? You get an error message or an autoplay option?
  b. When you get the prompt "insert disc please?

  c. I recommend you uninstall any third party if CD/DVD burning software installed to check for conflicts.

  I suggest you try the steps from the following link:
  
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
   Back up the registry in Windows Vista

• I have the Hello, I have a Windows Vista Business OP, 32-Bit - I'm not able to use my CD/DVD player - "the message,"Please insert the disk"as much as I insert a disc."

  What do you think could beb solution?

  I tried a solution by Microsoft, but I could not find filter lower or higher in the right pane - so I had to give up.

  See below;

  Windows Vista

  1. click on Start

  Collapse this includes this im

  

  and then click all programs.

  2. click on Accessoriesand then click run.

  3. type regeditand then click OK.

  Collapse this includes this image

  

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  4. in the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  5. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  6. in the Edit menu, click delete.

  7. When you are prompted to confirm the deletion, click Yes.

  8. in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  9. in the Edit menu, click delete.

  10. When you are prompted to confirm the deletion, click Yes.

  11. exit the registry editor.

  12 restart the computer.

  Delroy

  Hello

  There are several methods to check the high low filters and maybe it's not yet the real
  the cause of the problem.

  -------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Request for emergency assistance. -CS6 adobe Master Collection - please insert the disc

  Our company has downloaded Adobe CS6 Master Collection for deployment on our image master this year.

  When you try to install using the files we downloaded and ran the disk hard that the installation said "Please insert the disk", it should not be necessary, as I already have all the files required to install on my computer.

  I need a quick fix to what I have to get this master image made and deployed next week or two and I have hundreds of machines to do on.

  It's a clean install and so there is no problem of compatibility with previous programs, I tried looking for installs it individual programs themselves in cases without success, I had a similar problem with the Autodesk products that I solved it by installing the trial version and then upgrade to version full immediately after installation. I have not tried that with this problem but I'm sure there is a better way to solve the problem. At least I hope there is. Please get back to me as soon as possible with this because I have to get this sorted out within a very tight timeframe.

  Hello ksatech,

  a first information please read this: Re: CS6 install question asking to insert the disc, but install desktop.

  Good luck!

  Hans-Günter

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

  (With the help of Win 7 32 - bit update)

  I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

  Also, AutoPlay was disabled on my system for years.

  That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

  How can I be to determine:

  1. What causes the error message and/or
  2. How to stop it forever!

  Thanks for any thoughts or ideas!

  DennisCPA

  Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

  If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

  This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

  See you soon

  Glenn

• Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

  All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

  Original title: disc E

  Hello

  Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

  It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

  (1) Windows operating system you are using on the computer?

  (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

  (3) what is the exact full error message you get?

  (4) when exactly you get this error message? It's when you try to start the computer?

  (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

  (6) what are the recent changes that you made to your computer before this problem?

  Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

  Suggestions for a question on the help forums

  Hope it will be useful.

• Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

  When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

  Hello

  1 did you change on your computer?

  2 what other USB devices are detected on the computer?

  Try connecting to another USB port and verify.

  Connect the card to internet data to another computer and check if works

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• Please insert the floppy disk in drive\device\harddisk5\dr5

  I get this error message whenever I open 7 elements.  The upper part of the error message says PHOTOSHOPELEMENTSORGANIZER. EXE - NO DISK, then the IT IS WITHOUT DISK in THE DRIVE.  PLEASE INSERT a DISK IN the DRIVE\DEVICE\HARDDISK5\DR5 is displayed.  I can't go out, cancel, try again, or continue.  Can anyone help?

  
  Thank you!

  Yes, I would try a re - install.

  See you soon

  Bob

  ------------------------

  Become a friend of Photoshop Elements on Facebook

  http://www.Facebook.com/PhotoshopElements

• installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

  original title: Gears of War for PC (Vista)

  I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

  Hi NoOneSpeciale,

  It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
  Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

  Let us know the result, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• Error: «Please insert a blank disc into the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning"

  Hi, we are currently running Windows XP SP3.  My daughter tries to download a song from Windows Media Player, she needs for her class dance.  It just download the song bad by accident without problem.  Now she's trying to download the song using the same CD (CD - R80) and it gives sound this error: «Please insert a blank disc in the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning."  Someone please help.  She needs this to practice his senior dance solo.

  As I understand it, the CD was already burned once, and now she's trying to burn on the same CD again? This is not possible, as the CD - Rs can only be burned once. She will need a new blank CD - R, like the error message.

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.

• When you use a blank CD in the CD drive and try to open it to put the files, it is written "Please insert a disk in the drive."

  Original title: windows 7

  CD drive reads CD when there is something on it but not read a blank CD. When I put a blank CD in the CD drive and try to open it to put the files it contains, it says please insert a disk in the drive.

  Movido al foro EN - U.S. / /.

  Hi Robert,.

  Thanks for the screenshot of your system information.

  As you can see in the screenshot, on the right side, the Description indicates that this is a CD-ROM drive, it means that it's a player-CD (Read Only Memory) which can only read the discs, but cannot write data to the disk. You may need to replace it with a CD/DVD burner drive for read/write drives.

  Hope this information is useful. If you have any additional questions on the issue, please post back, we will be happy to help you.