Computer speakers not working not when it is connected to the TV

Similar Questions

• Receives sound of digital audio to the speakers on HP a6433w when you are connected to the TV

  Hello, I need a hero, please. I connected my Panasonic TC-L42U5 TV my HP a6433w computer (Windows Vista), using a HDMI cable. Well, I use TV as a computer monitor. My goal is to get the TV to the sound output to my computer speakers, which are plugged into the sound card Realtek. All I really have to audo out on tv is digital coaxial out, and which is connected to the digital in on my hp. But I have no sound. What can I do? Thank you!

  Hello Ptero1,

  Default settings will be put to the analog jacks. You may need to check the settings to make sure they are defined for digital use.

  Maybe this article will help you http://goo.gl/9JATB

• How can I synchronize my phone with my mobile phone? I get error message "your computer does not appear to be connected to the Internet.

  I contacted chat twice, and after half an hour, they tell me it is a technical question and they will transfer me to tech support.  Then I cut.

  Brett, I thank you for your support.

  I did everything I could think of, and yesterday I just wore clearly and said "you can do it!"  I tried one more time and bingo! I have been authorized to connect. After a year to pay for Photoshop CC, I'm so happy to finally be able to synchronize. It's a great program.

  Sent from my iPhone

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• No internet access when it is connected to the modem

  HI I have an Ethernet cable modem BEFMCU10 model v3 connected to a Netgear n100 v2 wireless router. The modem works only when it is connected with the wireless router. When I try to connect Ethernet. Modem to PC, it does not connect, there is no internet access. My ISP is Comcast (Xfinity). It's really weird because how is it possible that theres internet via wireless, but when I connect my modem via Ethernet, I have no internet access

  I remember the first time I activated my modem there is xfinity software that did something to my modem but I don't think it has to do with anything he just install something in my laptop. I did a clean install of the software or anything has been removed.

  > Sometimes I download things and I prefer to use the physical connection because its faster.

  You will get the same benefits and an easier time using a wired connection to your router, rather than the modem.

  > My prolem is resolved, I followed your instructions, thank you

  You are welcome. Please mark as replied to close the issue.

  > is - this quite useful to purchase a Docsis 3.0 modem

  You can check this with your cable provider, but probably not.  Unless you have a very high speed (usually of company type) cable plan there would be no advantage.   You also must be sure that any modem you purchase is compatible.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  
  (138042)

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not allow me to click on the icons.

  I turn on my computer and connect to a single user and my computer does not allow me to select all the icons, but if I pass users and connect to another user at the same time, I can use my computer. My computer was working fine until I installed Office 365. I called the technical support on the office and they said that it was not the office which was the cause of the problem. Any suggestions?

  Hello

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you can not select or open all the icons in a user account.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what happens when you try to select icons?

  2. do you get an error message?

  Here are a few troubleshooting methods that you can try in order to solve the problem.

   

  Method 1: Try to run fix it from the link below:

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: try to rebuild the icon cache and check.

  a. open the Start Menu and type cmd in the search box and press on enter.

  b. in the command prompt, type each command line below one at a time then press ENTER after each single line.

  CD /d %userprofile%\AppData\Local

  DEL /a IconCache.db

  OUTPUT

  c. log off and log on, or restart the computer to recreate the icon cache.

  Note: This helps rebuild and recreate a new file IconCache.db .

  Method 3: Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE.

  Original title: WEATHER GADGET

  MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE. I TRIED TO CHANGE THE LOCATION, BUT IT IS OF NO USE. PLEASE HELP ME SOMEONE.

  When you click Download and install, click on save, not run and save it to the desktop. It will be a Zip file which you right click | Extract all.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I bought the software told me that it is possible to install the

  Hi, I work with the standard of the CS6 for Mac, Adobe, I bought a DVD with the software. I already installed on my mac book. Soon, I want to buy a second computer for my work. When I purchased the software, I was told that it is possible to install the software on a second computer. But I also read lately that I will be allowed to work with a computer. I want to work on both of my computers without or install and / activation of the software every time. Is this possible? Thank you!!

  @

  You should be able to install the product on two computers as long as they are running at the same. The platform should also be Mac

  You can download the product of

  Download the CS6 products

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.