Computer starts: problems
I recently had a lot of trouble to make my computer with Vista at startup, it would work sometimes, other times re-launch at startup. I thought that this could be a windows problem, so I tried to re - install windows when I finally got to do the start, he did the process from the beginning until he wanted to re-start, he would have still not finished, so I opened my computer, grabbed with the RAM and BOOM, it worked fine, installation was always pointing however. I was given an option every time when I turned it to either go into Configuration or vista. I turned and walked away earlier and he went to the installation, when I came back he expanded windows for installation files, I said to myself, there is no reason to spend with it when my computer is running, so I cancelled it and now it won't start windows or let me install windows.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
Hello
After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
Then a window pops up saying "Startup Repair cannot repair this computer automatically.
The details of the problem say;
Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
Signature of the 04:65537 problem
Signature of the problem 05: unknown
Signature of the 06 problem: BadDisk
Signature of the 09 problem: unknown
Signature of the 10:1168 problemSystem Restore does nothing, and all the other tools of recovery. :(
Please help, it will be much apreciated :)
DOMIf you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates. MS - MVP - Elephant Boy computers - don't panic! -
When I click on the icon to start the whole process, my computer starts to blink, but I get an error message. It does not begin to install creative cloud either. Any advice? This happened to someone else?
Tyler, please try to remove remove creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html & creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
We would like to also know what version of OS are you using?
-
given the date and time not set when computer starts. also have a problem with typing
by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?
on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?
You may have a failed in your motherboard CMOS battery.
It's a battery power supply NET, size piece that keeps your system settings when your computer is off.
They cost about $5 to replace.
http://www.computerhope.com/issues/ch000239.htm
How to replace the CMOS battery in the above link info.
See you soon.
Mick Murphy - Microsoft partner
-
The Apple Mobile Device Service service on Local computer started and then stopped.
My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)If your iOS device does not appear in iTunes, try the following:
- Open Control Panel > Device Manager
- Plug in your device
- Locate Bus USB Controllers > Apple Mobile Device USB Driver.
It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB. - Right-click and select software update of the driver...
- Click Browse my computer for driver software
- Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers - Click on let me pick from a list of drivers for devices on my computer
- Click on Apple Mobile Device USB Driver
- Click Next, then close and exit the Device Manager
To step 3 above, open the Device Manager. Expand one of the articles that are listed.
- USB Bus controllers
- Imaging devices
- Portable devices
- Other devices
Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.
Or try If iTunes does not your iPad, iPhone or iPod - Apple Support
If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.
Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.
TT2
-
How can I configure numerical Lock ON when the computer starts?
I have a new laptop HP G70. In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on. This does not work on my computer HP G70. It always starts up the number Lock OFF. How can I configure my computer to set the digit Lock ON when the computer starts? I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.
Also, how can I configure my computer to set the touch mouse on the computer OFF for the start. I always use an external mouse.
Any help would be appreciated. It is a simple thing, but the present operation HP G70 is most annoying.
PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!
THE HP G70 WAS FAULTY! EACH HP G70 HAS THIS PROBLEM!
HP REPLACED MY HP G70 WITH a HPdv7. THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.
.
Bob_in_PGII'm surprised that nobody knows how to set the Num Lock at startup before you connect. Where is the help of HP?
I now have Windows 7 64 bit.
There must be someone who knows how to do this.
Bob in PGI
-
Re: Portege 500 - starting problems
I have the following problem with my Portege 500:
When I turn on the computer the laptop appears to hang with a black screen, no icon of Toshiba and no Windows icon.
Light blue hard drive indicates that the computer is something.
After waiting for a time very, very long time (can be hours) I disable the hard way by pressing the off button for a few seconds.
When I start her again the computer starts up normally and is in Windows in less than a minute.
The issue also appears sometimes when I start it from sleep mode.I have Windows XP with all updates on the computer. I downgraded from Vista, after slow performance.
I lie in the newest bios.
I had the computer on service once when I had Vista on it because I've lived that I think has similar problems. According to me, once again to send to the service.
A solution out there?
Best regards
By
NorwayHave you tried to reinstall Windows XP already?
And try if this happens when you use your laptop only on battery and only on the AC adapter / CC. Perhaps this can clearify something. -
Crazy computer - starts by itself at night after I stopped it
I have a HP Compaq dx6120 with windows xp professional. It is connected to a router wireless internet via Ethernet cable. Office of my neighbor is also connected to the same router by Ethernet cable. In any case, my computer starts by itself at night after I completely stopped him. This only happens when the computer is connected to the internet.
In the device, under power management Manager, the box "Allow this device to wake the computer from sleep mode" is disabled. Also, I went into the bios settings and seems not have the capabilities of WOL, or the value is none. I'd appreciate any help to get rid of this problem.
It's probably in your Bios. check that http://forums.cnet.com/5208-10149_102-0.html?threadID=43986
-
When my computer starts up, I get a message that says "SERVER ERROR ' / ' in the application" I can't recover my desktop computer. " Can someone explain what application ' / ' is?
Hello
1. what operating system is installed on the computer?
2. were there any changes (hardware or software) to the computer before the show?Start the computer in safe mode and check if the problem persists.Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Reply with answers to help you in a better way.
Hope this information helps. -
When the computer starts, it reads configuration updates 1 3-0%, but it continues
Latest Windows Update 12.8.09; do not update since 12.8.09
Display of error code 8070002.
Mechanic charged and removed the registry and advanced system care3Hello
Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH
Fix Error 80070002 when using Windows Update in Vista
http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/------------------------------------------------
Check the above and you may need to use these methods to interrupt the cycle.
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
Computer starts in the middle of the night
After running four different games, I minimize all and put the computer to sleep or Hibernate. Sometimes in the middle of the night the computer starts and displays a screen of Google. The problem is, he loses all the games. It is said that they are not protected and I have for them all over again.
My question is, how to protect them from losing. And why the computer starts in sleep or Hibernate?Hi HD RIDER 1,
Welcome to Microsoft Answers Forum.
Since when are you facing this problem?
What are the recent changes?
Do save you the game before you put the computer to sleep or into hibernation Mode?
Are you using a mouse and keyboard wireless?
Have you encountered this problem before?
If you had not encountered this problem before you can go ahead and perform a restore of the system on your computer.
Try to restore the operating system to an earlier point in time when it worked great for the steps below:
Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
In the System Restore dialog box, click on choose another restore point and then click Next.
In the list of restore points, click a restore point created before you started having the problem, and then click Next.
Click Finish.
You can see the link below for more information:
http://support.Microsoft.com/kb/936212
I hope that this will really help you, good luck.
Kind regards
Manasa P-Microsoft Support -
Console the two options at the start - problem with Restart of recovery and XP Professional
I have the recovery console option at startup instead of wndows XP Professional. Currently, I put my computer starts automatically in Windows XP Professional after ten seconds have passed.
It works normally except when my computer wants to stop and restart because a new program has been installed or changes have been made to the configuration of the software installed on my computer. In this case, my computer hangs just when it is trying to restart after it has been switched off.
So my question is, has he entries I can make to the registry to force Windows XP start automatically in XP Professional after he stops for a reboot?
Thank you for your help in this matter. I appreciate that very much.
Hi Gak1952,
Follow the steps in the article.
Advanced Troubleshooting for General startup problems in Windows XP
-
Need help
Can someone help me I am not very computer... my computer started sending multiple copies of any email sent again and again... like 26 copies for 1 person, please please someone can help meYou did not mention the e-mail program you use. If it's Outlook Express, you have corruption of dbx files.Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.After you're done, followed by compacting your folders manually while working * off * and do it often.Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.General precautions for Outlook Express:Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.Compact often as specified above.And backup often.Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?
I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.
Hi EddieBryan,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. when exactly you receive the error message?
Method 1
Check if the problem persists in safe mode and after return with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Method 2
If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on Start , then click run.
2. type msconfig , then click OK.
The System Configuration Utility dialog box appears.
3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Method 3
If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker
-
My computer start or load, continues coming BSOD
My computer start or load, continues coming BSOD
The problem seems to be caused by the following:Ntfs.sys
PAGE_FAULT_IN_NONPAGED_AREA
I followed the instructions and procedures, but it cannot go beyond that point and keep recurring whenever he starts or is restarted
Technical information:
STOP: OxOOOOOO50 (OxE2DD1000, 0x00000001, 0xF837D73, 0x00000001)
NTFS.sys - address F8373D73 base at F834F000
DateStamp 48025be5
Beginning physical memory dump
Hoping you can help with this problem
Thanking you
ChrisHi Chris,Try the methods listed in the articles given below to resolve this issue:
Maybe you are looking for
-
which is: ErrorDescRemoving_FailedToLaunchTask
I get this error ErrorDescRemoving_FailedToLaunchTask when you run the system optimization software. All the answers to what? And how to fix it. Alan
-
I have an active Excel sheet with 10 columns. How can I add 20 empty column after column 5?
-
Hello! As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning. Error: 80070426 Already tried a few suggestions MSKB. Method 2: Set Cryptographic Services to automatic, network l
-
Burner DVD not recognized computer Gateway 2750 laptop under Vista
I have a DVD burner and my computer recognizes that the CD burner, I try to update the drivers but it doesn't show any DVD material. __ I have a laptop gateway 2750 running Vista Home Prem and I a bicoeur precessor. My computer only recognizes the C
-
Intel hd with nvidia optimus not detected by remote fx
I use windows server 2012, Datacenter Edition. I want to install Ubuntu as a virtual machine on that server with remote fx. I have installed remote fx, but it does not detect my GPU (intel HD and NVidia gt 630 m). When I freshly installed server 2012