Error Msg: "you are logged on with a temporary profile. Restart your computer and try again.
Try to start Windows Easy Transfer, but I get the an error msg saying I am connected with a temporary profile.
I use Windows XP and have 2 user accounts settings; each with administrator privileges. What is going on? How can I connect to avoid this problem?
I found this information.
http://voices.Yahoo.com/TECHTIPS-Windows-7-easy-file-transfer-tool-error-you-7098418.html
Tags: Windows
Similar Questions
-
I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help
Run the Setup again.
Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation
Does that help?
If the above does not help then try to reset WMC: -.
Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.
Now reconfigure WMC again
-
Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).
Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.
Have not been able to find a solution for the moment. Any help would be greatly appreciated,
Thank you!
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but these two links will help with older programs
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303
-
I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.
Help!
I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.
It worked for me.
-
PSE - 11 on computer given to nine (w-7) Impossible to load her get message "the installation process has encountered an error so that during the installation of the shared technologies. Please restart your system and try again". Done it several times and still the same message. How to install correctly?
Thanks in advance.
-
Original title: temporary profile
I was wondering if anyone can help... I have a compaq laptop, windows 8 and the last few times ive turned on n signed in its took much longer than usual and connect to a temporary profile where it seems that everything I had there before such as files and photos have already disappeared. But it then opens with a message saying something along the lines of. . "You have been logged on with a temporary profile, in this profile, you can access saved files and any new tjing created or added to this profile will not be saved" does anyone know how solve this...
Hi Lucie,.
Activation of the built-in Administrator account can help get the problem solved.
Perform the steps suggested by Pinaki displayed from the link below and see if it helps.
Answer please if you have any questions.
-
Original title: the user environment
After starting windows, on the Welcome screen, this message always comes.
"User environment.
Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...Thanks... :)
This is typical of a corrupted profile. To recover, perform the following steps:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >Almost always, corrupt profiles are accompanied by damaged drive. During recovery, run a disk check with the /r or /f on your computer option.
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >HTH,
JW -
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Desperately need help. I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games. So I thought that I do the big thing non-technical MOM and start cleaning up the programs! Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer! I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
"your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand. Not technically minded, to take me on as a challenge! Thanks bunch :) Sarah
Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlt-4-2
-
"you have been connected with a temporary profile.
I can't find the words to express the degree of anger with microsoft! I use W7 for a few weeks and just started getting the message "you have been connected with a temporary profile" and lost everything that was on my desk (shortcuts application, saved files and settings). I scoured internet (including MS help/support/etc.) and found the HUNDREADS of comments on this problem but with NOT a SINGLE solution that works and WITHOUT EXPLANATION of why or how it happened. This simple question is W7 TOTALLY USELESS and I'm trying to figure out how to recover my money on buying. If I could get my hands on the neck of the W7 developers, I'd be more than happy to squeeze the @$ % # out of them and they could keep my money. It's PATHETIC and a technology CRIME! All comments with a value of manufacturing?
Hello
Data is not lost and is accessible from any ADMIN including the hidden Admin account.
Check the C:\Users\Your user name.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
original title: strange error on emailing photosI used Hotmail and Google Chrome on the front, send and receive emails and attachments without any problems until recently.
Lately, trying to send a few family photos (no message) I got the following error message:
"Your message seems to have triggered our spam filters. Could you edit your post and try again? Learn more. »I tried to "Learn more" and did not.The question is, how can a bunch of private photos trigger anything, especially because the real junk that reached me obviously don't.Any help with this would be most appreciated.ReadHi read,
The question you have posted is related to Windows Live Mail and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.
-
The screen message, "" Windows can't find your locally stored profile and is logging in with a temporary profile". What should I do?
Hello
Try the troubleshooting provided in the link below steps to fix the problem.
Error message: "Windows cannot load the locally stored profile".
-
I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.
A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:
"The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "
I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.
How can I get my profile without losing any data?
Hi Salman91,
Thank you for visiting the Microsoft Windows Vista Community. New profile created, try browsing to the old profile (C:\users\username). You should see all the old user data. If this does not work, try to copy the files in Safe Mode.
Please let us know if that helps.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: scanner problem
I get this error - "there are no installed TWAIN compatible device. Please install one and try again. "- When I try to scan a document using the utility Windows 7 Scan (hppscan7.exe) and a printer HP Color laserjet CM1312nfi. I tried to reinstall the printer driver and software. I have a laptop HP G71-340US running under WIndows 7 64-bit. Service Pack 1 is installed, and all windows updates are up-to-date. I hope that someone out there has a solution for me!
Hello
Have you made changes on the computer before this problem?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the troubleshooter of material and check if that helps.
Open utility troubleshooting hardware and devices:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Temporarily disable the security software and check if it helps.
Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
Run the HP scan Diagnostic Utility and check if it helps.
HP scan Diagnostic Utility:
http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=en&docName=c02114802&LC=en&product=3418707
Hope the information is useful.
-
I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?
Hello
Please try the steps in the following thread
-
Hello
My tool odi 11g client is in linux server.
ODI 11 g cilent (linux) and the server is linux server.
I can not connect on behalf of the repository only job as workrepo210. His connection with success.
I created two more workrepository11 wprkrepo211and repositories.
To do this, I created two different users. I gave permissions also. I configured workrepositories details in odiconsole & admin console
But I'm unable to connect to in odiconsole workrepository11 wprkrepo211and.
When I try to these wprkrepo211and workrepository11
I get the error message like
Unable to connect to the specified repository. Please select a different alias and try again. Please help me.
Thanks in advance,
A.Kavya.
Hello
now its works well.
I configured with default details repository work & maste rreposiory in the administration console.
I configured the url jndi in odi console with the correct data.
Thank you best regards &,.
A.Kavya.
Maybe you are looking for
-
I send messages that require a response to send to the entire list of CC. If the message fails to reach the recipient target (unknown cause and nothing to do with Mozilla TB) I always have a copy and can of course she Fwd. But then the ease of reply
-
Sat Pro L10: LCD screen and market off button / stop
Ive had my L10, little more than a week and im having problems with the on off button does not turn on the laptop properly, so I need to keep it easy on and outside. After awhile, it will load up finally. However now wen it starts after about 5 minut
-
resizing Panel prohibiting under minimum?
Is it possible to ban active resizing a panel below the minimums? I read this post and got up examples of projects, but they treat mainly the EVENT_PANEL_SIZE event (after resizing is done). I would use the EVENT_PANEL_SIZING event, which is while r
-
Hello.. I'm new to LabVIEW please bear with me... I'm trying to measure the speed of ROTATION of my engine that has an optical pick up tachometer attached to it... The signal is analog and has two States 1-0 (here, the output is of the order of milli
-
Updated Dell C640 laptop hard drive
Hello I have a laptop Dell C640 with a 30 GB hard drive in it I want to improve. I'm looking to install a hard disk of 160 Go in there and have a few questions. I have located the hard drive and knows how to get it out but I was wondering if I could