computer stops responding

Similar Questions

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• My computer stops responding when checking for updates (Windows 8 tp 8.1)

  My computer is running windows 8 and it stops responding when checking for updates.  I want to update 8.1 so I can then upgrade to windows 10.

  I get the error message is below.

  WindowsUpdate_8007041D OR WindowsUpdate_dt000

  Any help will be greatly appreciated.

  IMPORTANT! -Online support for Windows 8 ended Tuesday, January 12, 2016.

  If Windows 8.1 is not installed by February 9, 2016 (or even earlier), the computer will NOT provide for new updates, or the free update for Windows 10.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Assuming Win8 64-bit...

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote this message:

  1. when (date about) have you buy the computer?

  1B. the computer came with preinstalled Win8, did you do a clean install of Win8 or have you upgraded (e.g., Win7) computer for Win8?

  2. What is the full name of your application or the third currently installed antivirus security suite (i.e., not Windows Defender!), if any, and when (date about) is your subscription current expires?

  3. what applications third-party a-squared (that is, not Windows Defender!) are installed, if any?  What third-party firewall, if any?

  4A give Norton or McAfee application ALREADY installed on the computer since you bought it?

  5. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  6a. is KB3124275, KB3124001, KB3121918, KB3109560, KB3110329, KB3121461, or KB3121212 listed in installed updates (not updated story)? [1]

  6B. what the KB2917499 or the KB2871389?

  7. What number of Update Version & KB are displayed in the second line of text using IE10 | [Alt + H + A] tab. for example, Updated Version: 10.0.54 (KB1231231) ?

  8. is Adobe Flash Player v20.0.0.272 [sic] installed? TEST HERE USING INTERNET EXPLORER or EDGE ONLY! -online http://www.adobe.com/software/flash/about/

  

  Example of the box Version information on this page

  (do not take into account any notice "outdated" red; ignore the table below the box for Version information)

  9 is Firefox (version 44.0 or superior) or Google Chrome (version 48.0.2564.97 or higher) or another alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  =====================================================
  [1] Control Panel | Programs and features. See installed updates (in the left menu)

• TBird causes the computer stops responding.

  TBird 38.1.0 (automatic update on), Lenovo T61, Win 7 Pro (auto update on), Microsoft Security essentials (automatic update on).

  Problem started a couple of days after, add a calendar on (lightning?) had installed without authorization or request. TB started, but then PC unresponsive shortly after. A message or two can download before the full stop. PC must be turned off using the power switch.

  From TB in SafeMode with shift seems to restore normal operation. By using the safe mode start, all the addons have been deactivated and deleted. Or at least I think.

  
  

• Computer stops responding when you navigate on the web

  Recently, when I was browsing the web, my computer began to crash for long periods of time. The strange thing is that it only happens when I use Chrome 17 or 12 of Firefox. When I use Internet Explorer 9 I have no problem. The 'freeze' happens randomly on any web page, when I click to scroll down or click on a web link. The browser becomes unresponsive, followed by the bar spots and the office. I just have to wait for five minutes. I don't like to use Internet Explorer; I find much slower in performance compared to Chrome.

  I use a Mobile Broadband, manufactured by ZTE, Vodafone Dongle to connect to the internet. I run the operating system of Windows Vista 64-bit Service Pack 2.

  Unless Microsoft has started making chrome and Firefox work does not correctly if you use IE, I'd appreciate any help.

  Hello

  I suggest you to contact the support of Google Chrome and Mozilla Firefox support for better support on the issue.

• Computer stops responding when you run any game

  Graphic problem (or so I think that)

  I don't know why it does. But every time I play a game my Pc the computer hangs and my moniter screen shows a bunch of discolored pixels. Ive got to day still does not, reinstalled and it does not always work, and THEN restored my pc and he always does. :\

  Try the next update to see if it helps.
  http://store.steampowered.com/news/?feed=steam_client

  Otherwise, you should post your question in the Steam forums listed below:
  http://forums.steampowered.com/forums/

  Thank you

  Marilyn

• Power management problem: computer stops responding

  I bought a HP D4790y desktop system on a year and a half. The problem I have is that somethimes when I put the computer to sleep (start-> sleep), the monitors shuts down but the processor does not seem to go to sleep (i.e., the power led on the enclosure does not blue (normal) to orange (sleep)). When this happens, I am unable to get the system to begin to meet again, and I have to force a shutdown by pressing the power button for a few seconds and then restarting. I've upgraded to a new graphics card (NVIDIA 8500 LFE) thinking it was a mismatch with the graphics card, which has been the cause of the problem - no luck.

  A related problem is that sometimes the computer goes to sleep very well, but when I come back to start working again several hours later, light of the cpu has already changed back from orange to blue, but the system is completely insensitive (as described above) and I have to force a shutdown and restart. When I check the system event log, I can see the factor of reactivation with "Wake Source: Unknown" in the comments.
  The Sleep function works perfectly about 75% of the time. The other 25% of the time, one of the problems above occurs.

  Hi CrowT,

  Take a look at this thread the Technet:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/89d54396-1070-4cbe-b79f-46384d7de571

  He gives excellent advice of troubleshooting for sleep problems.  One of the measures listed will display any device which is configured to wake mode 'sleep':

  Click on start-> all programs-> Accessories.
  Right-click command prompt, and then click Run as administrator.
  Type the following command and press ENTER.

  Powercfg - devicequery wake_armed

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• Computer PORTABLE PAVILION P5P69EAn her: Display Driver Intel HD Graphics Drivers for Windows 8 (R) stopped responding.

  The above laptop was bought just after Christmas and the day followind the following message is displayed:

  Display driver Intel HD Graphics drivers for Windows 8 (R) stopped responding and successfully recovered.

  I've updated all of the Microsoft and updates from HP, but the message still levonorgestrol.

  HP confirmed that they are working on a solution to this issue, at least, it's frustrating for the user and it also reflects badly on HP. I have

  Hi Maggie,

  As the update of the driver does not solve the problem I had another recommendation fom HP -.

  HP Hi Steve,.

  Thanks for reaching out.

  As the update of the driver did not help I recommend that you run the troubleshooter Windows Update here: http://ow.ly/WhvXt

  Let me know if this clears the error.

  -Technical support of HP Eric - social media

  Since this try the peroblem has occurred even once yet, hopefiully is solved!...

  In addition, I don't know if it's a specific problem of HP but some of the chat on the Forum seems to think it is!...

  Steve.

• I get the same message: a script on this page may be busy, or it may have stopped responding

  Since a couple of days I get the same error message: "a script on this page may be busy, or it may have stopped responding." You can stop the script now, open the script in the debugger, or let the script continue. »

  I'm not a COMPUTER expert, however, I have read similar online messages and tried many steps such as:
  --deleting history navigation and cookies
  -Mozilla resetting to the factory settings
  -Uninstall and reinstall Mozilla

  Unfortunately, the problem is always the same. What can I do? I work from home and need internet to work 100%.

  Moreover, the navigation works fine in other browsers, but not Mozilla.

  Thank you

  This script is the culprit in the following message?

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger or let the script.

  Script: resource://gre/modules/addons/XPIProvider.jsm-> jar:file:///C:/Program%20Files/Mozilla%20Firefox/browser/extensions/%7B82AF8DCA-6DE9-405D-BD5E-43525BDAD38A%7D.xpi!/bootstrap.js-> resource://gre/modules/commonjs/toolkit/loader.js-> resource://gre/modules/commonjs/sdk/loader/sandbox.js-> resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/jquery-2.1.0.min.js:28

• Why do I get the message "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to s?

  I have 3 windows firefox with several tabs in each, but the main (and sometimes others) gel and prevent navigation showing a box indicating
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://fctoolbar841468a1d7f44bd384e6bb0f13a06c64/content/fctoolbar.js:1.
  To stop the script? I think it's not to do with Google Chrome but FF model internal to web pages. Thus, a deficiency in the FF, inability to cope, but with what? As far as I KNOW, all software is up-to-date. I have restarted FF, restarted the laptop, but has not changed the FF problem. What is the cause?

  This is probably caused by a toolbar that installs on your version of Firefox. Most of the scripts that begin with chrome:// are extensions.
  I think that this is very probably the Nectar Search Toolbar , which raises the question, because it seems to be the only toolbar installed on your computer.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• Error Win 7 - display driver stopped responding

  Windows 7, 32 bit, during normal use makes the sound of a detached USB device and then the screen goes black.

  After a few seconds the screen back again, but the computer responds to nothing; then the screen goes black again. This error message is displayed: "driver Intel Graphics Accelerator display drivers for Windows Vista (r) stopped responding and has successfully recovered."

  He has no option but to manually shut down the computer.
  I've updated the display driver and bios, but it happens still 3 to 4 times per day.

  Hello

  You have a Windows 7 preinstalled on your laptop

  But the error message means that:
  > Intel Graphics Accelerator Drivers for Windows display driver Vista (r) is no longer

  Seems to graphics card driver Vista is installed on Win 7 OS.

  Maybe you should remove the Vista display driver and install a graphics driver for Win 7.

  Welcome them

• Display driver stopped responding and has recovered

  Product: HP Pavilion dv7-6015tx Entertainment Notebook PC

  OS: Windows 7 32-bit

  Status: Clean installed Windows 7 Ultimate 32 - bit Windows 7 Home Premium 64-bit

  Hello

  I had several cases where the computer seems 'lag '.

  then, after a few flickers on my screen, Windows would give the error:

  "Display driver stopped responding and has recovered."

  There are still effects after this message.

  When dragging windows, scrolling top-down graphics etc. continue to Flash.

  This isn't all in hardcore, the GPU was not operating at high temperatures.

  Interestingly, I don't have this problem when I'm in the middle of hardcore games.

  The CPU was not under heavy load, the CPU was not working at high temperatures either.

  I checked the temperature with thermal control (HWiNFO32).

  I have a lot of resources, 1223MB of RAM to spare.

  I also have lots of HARD disk space too.

  I installed the latest version of the graphics driver for my product: AMD graphics driver high definition,.

  but the problem persists.

  Help, please!

  -John

  I understand your frustration, I had the same problem, I really did, for centuries!

  Try this:

  Do not go on the AMD website for a video driver. those who do not work properly for some reason any...

  Download on the HP site specific to your HP product, for example, I have a dv7 6015tx with 32-bit windows.

  Then I'd go to: dv7-6015tx drivers

  If you still have the drivers on AMD ATI Web site, uninstall them, restart.

  Go to the HP site where you can find specific drivers for your product HP, installation, restart.

  It seems trivial, but it's IMPORTANT and most of the time to restart after uninstalling and installing.

  It worked for me, hopefully it will erase your questions, good luck.

  -John