Computer stops when installing recovery CD.

Similar Questions

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• Computer stops when trying to start a video

  Original title: husband's Vista, the computer turns off when you try to run a movie any.

  We cleaned the computer, put in a new card video, checked all the power settings and power cord, the fan works fine. the computer is a gateway on a vista running years, Helppppppppppp

  Hello

  1. you remember to make changes to the computer before this problem?
  2. you receive an error during or before the computer stops?
  3. facing this problem when executing online videos or videos stored on your computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Also run memory diagnostic tool: http://windows.microsoft.com/en-US/windows-vista/How-do-I-know-if-my-computer-has-a-memory-problem

  Thank you

• computer stops when using Skype

  My laptop stops when you use Skype shortyly after the launch of video call, there is a new problem in the past, everything was fine.
  We have the laptop that runs daily every day could have questions related to heating.
  It seems there is no error message in the event viewer.
  When I turn on the computer it does not say she stop properly and it can run for hours, but as soon as you Skype even once turn off with warning message.

  Bravo Tim

  I ended up putting the nozzle of the vacuum on the computer while suction fan was off and sucked on a pile of dust that was clogging the fan, laptop is Purring like a kitten, heaters do not and do not turn off.

  Thank you for your guidance and quick response.

  Bravo Tim

• Computer stops when I run a program as a complete analysis of the Norton System or a program to convert video.

  When I launch a program like the complete analysis of the Norton System or a program to convert video on a DVD from my computer stops without warning.  Yes, I cleaned and blew all the dust inside.  Y at - it a program that will monitor the heat inside that is compatible with Vista?

  Hi, what type of program you use to convert video?

  Also, take a look at the following site Web de Norton:

  http://community.Norton.com/T5/Norton-360/full-scan-shuts-down-or-freezes-my-computer/TD-p/469270

• Computer stops when I try to run games, gets the blue screen locale ID: 4105

  Original title: blue screen, I don't know what to do

  Hi, for the last days of couple and officially from last week, my computer went to the blue screen with problems of memory, it seems.  I'm not very good with the technical part of the computers and I finally know what to do.  It gave me an error report which stops just when I try to use the search for a solution button.  He mostly stops when I try to run games on it, but sometimes he does when I'm not even in it. The last report of error was:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000005003
  BCP2: FFFFF781C0000000
  BCP3: 0000000000014FAD
  BCP4: 00014FAF00029F5F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050715-7051-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-11575-0.SysData.XML

  Please help me. I'm at a loss to know what to do.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• Computer stops when idle for one minute.

  Original title: where is conyrol time LOCK?

  My computer shuts down after only a minute or two of an inactive cursor... Where can I set the timeout?

  Hi Mary,

  1. What is the brand and model of the PC?

  2. have you started facing this problem recently? If Yes, are you aware of any material changes or software on the PC?

  3 - is the computer stops in fact or did the screen turn off?

  I suggest you follow these methods and check if it helps.

  Method 1:
  Follow these steps.

  a. press the Windows key + X, choose Power Options .
  b. click the link change plan settings under your power plan.
  c. turn off the screen and put the computer to sleep > set the duration of each 1 minute forever.
  d. click save changes when done.

  Method 2:
  If this does not help, restore the settings to the default values.
  a. press the Windows key + X, choose Power Options .
  b. click the link change plan settings under your power plan.
  c. click on restore by default for the plan.

  See the article.
  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Let us know if it helps. If the problem persists, we will be happy to help you.

• When the computer stops to install software updates, I see a white screen instead of the usual startup screens.

  I don't remember how long I've had this problem. What I've done is pushed the button on the monitor. This allows me to see the page, but does not allow me to enter data. I usually have to shut down the computer and then restart it again. What needs to be done to solve this problem?

  Richard Hayes,
  Please post with the information requested here: what to post in the Windows Update forum

  Depending on your version of Windows, you may need to perform a startup repair. System recovery options

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IE seems to be computer stop when in Firefox. How to block IE?

  When I have Firefox running, say on FoxNews, Newsmax, or even local weather, computer occasionally stops completely. In addition, too many crash of Script running that literally stop everything until I discovered the dialog box that allows me to cancel the script (all who's who is stuck.)

  Not sure, but I believe that these things happen only when the browser is opened in Firefox. The problem is not the temperature (such as heatsinks dusty, fans blocked, etc..) That's all nice and clean as a whistle.

  My suspicion is pointing IE as the culprit, since after a search session, etc., on the web, browsing history shows very little a huge pile of activity IE vs Firefox. There must be a way to block IE for all ads and framed, etc..

  Hello windmills.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Satellite A660 - 11 M stuck in a loop when installing recovery

  Hi all.

  I am now under a procedure of recovery for A660 - 11M. I used a bought at Toshiba Recovery CD.
  Everything was going well until the recovery is stuck in the loop of ' * now System Performance Rating *'.

  I found a similar case, where a person has solved problem of forced reboot. I did, too, but when he turned, the loop began.

  I wonder if there is anyway to stop this notation. It does not seem very important ultimately.

  Thank you.

  Hello

  You must re-run the HARD drive recovery.
  This means you must turn on the device
  -Press F8
  -then choose fix my computer
  -Then choose HARD drive recovery and
  -Retrieve the State of the box.

  Welcome them

• Old computer BSOD when installing XP and randomly after installation

  I'm repairing an old computer (5-6 years old) who has problems.  Originally, it was full of viruses and was completely sunk, so I did a cleanup of the HD and reinstalled windows... However, increasingly, the owner complained to get BSOD once in a while.  It happened during my installation of windows as well.  The disc to load everything upward, and when he is at "Windows Installation", he gave me a BSOD error:

  STOP 0X0000006F (0XC0000020, 0X00000000, 0X00000000...)

  I did a Memtest86 + to verify memory, and after 10 passages, there was no error.  I also cleaned all the dust in the computer, which helped me to get windows installed, but has not fixed the random BSOD would happen after installing windows (this happens rarely, making it difficult to reproduce).

  At first I thought it was the hard drive, because the hard drive is old and use IDE cables, but he spent under UBCD Disk Diagnostic tools.  In addition, on a hunch, I tried the first 95, and of course it enough it crashed the computer.  What is the cpu?  Or something else going on?

  Single Minidump file has been generated, but I am including here:
  http://CID-676f5f905e0a077b.Office.live.com/self.aspx/minidump/Mini021611-01.dmp

  I think that it is likely that the CPU or the motherboard is at fault. If it's a very old PC, not worth the effort/cost to recover. I recommend a new PC.

• computer crashed when installing sp 2

  original title: computer failure

  Downloading vista service pack 2 on a computer, it crashed and will not fix the other. Keep the remedial program when you are finished it will go back to fix.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  You can try the following steps:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Computer stops when the power to the computer to sleep, on computer virus problem

  Hello

  When I put my pc sleep and wake him up, a window pops up saying that the machine has stopped unexpectedly, and then the pc automatically reboots by itself,.

  after reboot, a window box comes in saying that the pc rebooted one... and that Windows will inform me what to do.  What happened yesterday and today.

  I must say however that Friday evening, August 24, my pc was slow work, since a few days I noticed, but Friday it was slower, I could see that something

  moving in often via the little blue wheel icon that shows that something is happening.

  I "had" McAfee Total Protection in my machine since 08/05/2012 and last night I clicked on the McAfee to do a full Scan of my pc, because I thought there was something fishy in it.  McAfee Full Scan clicked, a blue page with white letters arrived, quick and deep that I saw Dump numbers going up to 100, then the blue screen came out and restarted my PC.  After reboot a small box of Windows came to say that the machine had stop unexpectedly, he

  has run a control bar, when in fact something like 'your stop machine unexpectedly and windows will inform you what to do', something like that.  I then

  new click the McAfee icon, click the full sweep, the same thing happens again anywhere.

  Then, I went to the website of McAfee and talkative with Technical Support, he came into my pc to see for himself, he opened the Navigation button and had IP

  address to which McAfee was 'downtime '.  He told me I had a virus in my computer... He gave me a phone # to call for assistance in the removal of the virus. I called, the man

  did not come into my PC to see, he said, I had to pay $89. something taken him. I closed with him, went with the customer, aksed for my refund...

  sad situation, but I withdrew my PC with McAfee.

  I've downloaded Malwarebytes, checked my PC had 2 Trojan horses, you click on Remove to remove the.  Still had Malwarebytes in pc, I went to Trend Micro, which I had before in my pc for years and renewed my Sub. with them and has installed. After doing a full Scan, no virus.

  I made a 'machine checking if' work properly AM early this morning.

  This afternoon, August 25. I opened my pc, the audit began, time + after pc restarted normally, then all of a sudden the blue window came with white letters, dump numbers went up to 100 then pc rebooted, Windows little box came "... unexpected" and normal ran pc after.  Worked a bit on the pc then place to sleep so I could go somewhere, when I clicked on the mouse to wake up, as I always do in the pc, it awakened, blue page with while that the lettering came, took place on the same things as above.  PC ran good, had to go eat, put the pc to sleep, came back same thing occurred again

  I searched what happens and found nothing.  I went to the community, there nothing either.  So I'm here today to help hoping that you know what is happening.

  Thank you for your time and your help.

  Bebb

  Hello

  Currently, you have a program full-time antivirus installed on the computer?

  If you do not have one, I suggest you to install Microsoft Security Essentials.  Follow this link to download.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Follow these methods.

  Method 1: Run a Scanner online from Microsoft.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: To remove the virus manually, see the article:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Important: The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Re: Qosmio F20-110 - error when installing recovery

  Hi guys.

  Having a problem of formatting my laptop using the recovery of product DVD, the question is this: while the system recovery is underway, I have an error message that says simply.

  "!!!!!!!! ERROR! Press a key to continue... "
  As well as 3 beeps from my laptop.

  When the key is pressed (;)), it evokes a newspaper any to be perfectly honest, that is to say nothing at all for me. Then what seems to be BACK with the option to type, once I left the newspaper. In this case at any specific time during the recovery process, its been around 25%, 60%, 40% not any specific percentage whenever I tried.
  The disc is in almost perfect condition (having only been to Holster when I already restored my laptop). And there is no virus/malware/ect (to my knowledge) on this subject, before I tried the restore.

  I have upgraded the RAM a few years back, but I have used the system to restore a couple of times since then without any problems. Also it comes up with the same error trying to restore from a disk image.

  Any help/ideas as to what on Earth is actually past would be much appreciated.

  Thanks, Kitsou.

  Hello

  Well, if you can install Windows recovery disk Toshiba t it seems to be a malfunction of the equipment. The Toshiba recovery disc is pretested by Toshiba that it works properly on your laptop. In addition, he will restore the original settings of the box with all the drivers and tools of Toshiba. So I think that the problem must be hardware related as Akuma written.

  Theoretically, the HARD drive and RAM could be affected. These pieces, you can test with special diagnostics, looking just a little tools using Google and you'll find enough. I put t think that s a problem for you.

  In the worst case the motherboard and CPU could also be affected, and they are expensive parts. If you have some experience with laptop disassemble you can check second hand places like eBay for spare parts.

• Satellite L650-S5096 - error when installing recovery

  My brother ordered me this laptop online from Best Buy for my Christmas present in Dec.2010. After I opened and he started upward, I did then the system backup disc as it was told to do. I showed that I needed to 4 discs for back to the top after the fourth disc, he said that it was over. OK, so now I know that I've saved it in addition to the recovery partition also.

  So, last month, I wanted to do a restore of the system on this laptop. So I pulled out the 4 disks and put in the first and he did his thing and then asked for the 2nd and so on. Then after the fourth was done he said to put in the next disc, but I don't have a fifth backup drive. He had me only use 4 when I got it to save.

  And then abandoned on the problem of disk and restarted and I got to the recovery partition. So after that I started the process by clicking ok for all the warnings about everything will be deleated I arrived at the first installation process, then after five minutes, he went to the next process where it says "Copy files" and after 30 seconds or so, a box appears asking to insert the next disc.

  So I called Toshiba and talked about using technology, and they told me to unplug everything on the laptop and then turn it over and remove the battery for a minute. And then reconnect the power cord and then put the battery in and turn on the computer.
  So after she started upward he went to the BIG WARNING page on everything will be lost and deleated so I cliked next and next through the next coupld of no, then it poped an error message that says (error: F3-F200-0002).

  After repeating the process a few times the same thing continues to be. So when I talked to Jasmine on 11/06/2011 from technical support, she told me I can call Monday 13 and ask for the case manager and that she would approve that they send me a recovery disk free presence that is the disk does not copy at the moment where I followed it there Backup Wizard and he recovery partition is messed up. So I called the case manager today, and Doug told me that I have to pay to get the recovery disk.

  In my view, it's very bad customer service and I will never buy another thing from Toshiba again. And I will make all my colleagues and friends know that I went thru with this laptop...

  Hello

  I always was pleased the service in my country.
  However, I think you had some bad luck with the recovery procedure
  In my case, I was able to create the successfully recovery disk and everything was ok I ve also recovered the laptop once using the recovery of HARD drive and it worked too

  However, new recovery disc can be ordered here: http://backupmedia.toshiba.eu/landing.aspx
  It s not expensive: 30 Euros