computer that extends to the tv

Previously, I had my calculation running through my TV using HDMI to connect. I replaced the cable and no longer have the computer to diplay on tv even if I have sound and blue screen. My operating system is XP SP3

the cable is defective replace it with others

Tags: Windows

Similar Questions

My Contacts Windows Live is 452,1 MB and contains 16 files that extend into the size of 28.1 MB to 29.2 MB. Can one be deleted and if so, which?

Contacts Windows Live is 452,1 MB

I was sent here from the "Windows Live Solution Center" to ask my 'Q', below:

My Contacts Windows Live is 452,1 MB and contains 16 files that extend into the size of 28.1 MB to 29.2 MB.
Why so many large files containing essentially the same... Contacts?
Do we really need 28 + MB to store contacts?
Two of the files have been accessed today, while others have not been accessed for 6 days.
Can one be deleted and if so, which?

XPPro SP3 32 bit

--
happytilton®

@happytilton®

Since you are using Windows XP, your version of Windows Live Messenger be WLMsgr 2009.

- so working in online mode (b) - Messenger requires a Live ID access code to use.

The article I wrote and quoted above explained that WLM (Windows Live Mail), which is also applicable to the WLMsgr 2009 versions contain most of the information to determine what to remember as...

1. how to use the registry to determine the names of digital files of the database of Contacts

2A explained that 2009 has two functional databases for each Live ID (a primary and a shadow)

-both are needed. used 2009 the 'shade' as a catchment area to ensure synchronization occurs in both directions, when changes are made in both locations (local in Messenger or online at contacts.live.com)

Please read and understand the best article

http://liveunplugged.WordPress.com/2011/02/04/Windows-Live-Mail-contacts-database/

... especially the section dedicated to explain the Contacts 2009 databases.

Once you determine the digital records of your single Live ID database (shadow and primary) and the program created 'default' you can check the size of each. If you feel that your registry database shows other numeric names (created using other Live ID or perhaps due to an error by typing a user name in the Messenger sign-in box) and these folders can be deleted safely. Note: you may need to configure Windows Explorer to show hidden and system files to see when viewing in Windows Explorer.

In addition, you can also, as your contacts are stored online at contacts.live.com, after closing of Messenger remove the any local digital database called folders (for the primary shadow and if is the default). WLMsgr will recreate them on next signon and rebuild any local database folders and files based on what it sync (downloads) of the Live Server to contacts.live.com.

-Before the deletion of all files, it would be wise to connect to contacts.live.com and check that all your contacts are indeed present and represent for and for saving documents to archives/purposes export contacts to a csv file using the web UI option... Once completed then disconnection from the web UI.

-Do not, and I it cannot emphasize enough strongly, do not delete anything from the web interface before you delete the local databases on your hard drive (you can always return to contacts.live.com later to manage the contacts (remove, clean the unused or duplicates, merge duplicates etc.) if necessary after WLMsgr recreates local databases.)

Once done your registry key should show that three databases total (assuming you are using only a Live ID in WLMsgr)-the main and shadow for that Live ID and a default value (if it is created by the program).

You should have enough information to move forward or to ask additional questions.

As I mentioned earlier that, at a minimum, an empty list of contacts would be at least some multiple approx. 24 MB. Since you use WLMsgr 2009, and it uses a primary and shadow, the minimum size of about for you with no contact would be approximately 72MB (24 MB for each - primary, shadow and by default). As well as the contacts are added, the primary databases and shadows will be size.

Other topics presented in this thead element (but not significant) - comments below to close this loop

S ' for the use of your Hotmail account in Outlook. This use is not related or significant to the database used by WLMsgr. Contacts in Outlook (when the mail is configured to use Pop3 or DeltaSync with Outlook Hotmail Connector) are stored in the Outlook profile contacts, and quite separate from the WLMsgr database (i.e. neither Outlook or WLMsgr program communicates or synchronize or share data with each other to keep the feature)

FYI... not associated with 2009, but 2011 (for those who read along. WLM 2011 no longer uses the approach of two (primary and shadow) file for databases local contact so databases are smaller and also more robust in 2011 and better synchronize. Finally, with respect to the use of 2009, wysiwyg... no other upgrades for 2009 are planned (the code was frozen for more than a year, the latest version (never) released in May 2010).

Good luck.

.. .Winston

msft mvp mail

I am trying to disable cs5 on a computer that has lost the hard drive

I am trying to disable a cs 5 on a computer that has lost the hard drive, so I can't disable the product

Contact Adobe technical support via chat and ask them to reset your activations.

To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.

Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

My time capsule airport works to my iMac and my Sony laptop win7.

I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

Help?

Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

Step 1. Check your network configuration.

To check the settings of network configuration for the correct IP address information, you can do the following:
- In the command prompt window, type ipconfig/alland then press ENTER.
- The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
- If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.
Step 2. Try to repair the connection.
Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:
- Click Start, click Control Panel, and then double-click network connections.
- Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.

Part masking of a jpg that extends beyond the edges of the document?

Hi all
Trying to get my head ' around a good workflow in PS.
Here's the scenario:
I created a document with an A4 size.
I import a large (larger than A4) jpg on a layer.
I only use a very small part of the jpg and hide the rest, I have to go ahead and do this.
BUT! When, after creating the mask, I begin to move the layer autour, I noticed that the created mask extended only insofar as the borders of the A4 document, therefore the jpg areas that are found beyond the A4 are were not masked.
So when I move the layer around, these no hidden boxes appear on the sides.
So what (I guess) I ask basically, is: How do I create a mask that affects the entire layer and not just areas that appears with the borders of document?
Thank you very much! ......... D

Start with layer > layer mask > hide all.

How to get the hang on top of layers that extend beyond the canvas?

I have several image layers in a document which range from (inteninally) on the edge of the canvas. Whenever I have add a stroke (black border) to the doc, images that overlap are on top of the border of the race.
How to get around this?
Thank you.

Are you sure that set you the fill to 0% and not the opacity?

I bought an IMac second hand from a guy there told me to update the old version of the present on the computer. that im on the right now. But I can't seem to make it work. said its too old version. But I need to update that can help me.

I can't get the cs2 to update on the IMac. Can someone help me? With the cat serial number Adobe said its too old version. But thats why im trying to update

Please check the system requirements for | Adobe Creative Cloud

Concerning

Stéphane

free trial on a computer that has had the cloud of adobe before

I just moved in with my father and downloaded the demo free creative cloud on my dad computer. Apparently he had before and charged under its old name. It won't let me open anything without renewing his account which was 50/mo and he has never understood how to use it. What can I do to really take advantage of the free trial version. If I can understand, I am looking forward to subscribing to it, but have not had the chance to try it yet...

Have you tried to disconnect & signing of return with your Office CC Adobe ID?

Sign in, sign out | Creative office cloud app

Concerning

Baudier

How can I transfer my Acrobat Pro 10 computer that died at the new unit?

How can I transfer my Acrobat Pro 10 computer which died around my new. I have the serial number and am original purchaser. THX Jim

If you need to reset your activation meter, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

If you need to Setup and if you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

and activate it with your serial number.

If you have a problem dl'g, you don't follow all 7 steps. the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

Why this box background that extends beyond the edges of my model?

Hello, I bought a model for the design of a new site and I have encountered a few problems. If you look at the bar downstairs on the homepage (with navigation in there), you will notice that it runs across the width of the browser.
http://victorylcms.org/NewSite/home.html
But if you go to this page, the bar is only run the width of the model, which is how I want to look like all the pages.
http://victorylcms.org/NewSite/aboutus.html
I looked at the code and I'm still very new. I tried to copy and paste the "footer" to < div > code (x 3) but who did not. I think it has to do with the images that it is in, but even once, I'm not sure. Thanks for any help!

The footer div has slipped outside the div of the principal for the footer is not limited by the width of the main Division 970px

Move a div on top of the footer div to below the div. of footer

Change

TO

and change

The view object that extends to the level of responsibility.
Hi all

It is possible to extend the object from view to the level of responsibility?

Please tell me what steps to extend the view object at the level of function/level of responsibility.

Thanks in advance.

Yohanna Pachanekar
Substitution of VO & AM can happen only at the site level. However, controller extension can be customized/substituted at all levels, including the level of responsibility also.

Thank you
-Anil
http://oracleanil.blogspot.com/

What is this empty box that extends from the address bar?

I just downloaded the version of Aol of Firefox and this empty dialog box descends from the address bar. Then, I am unable to do anything with the page.
What should I do to get rid of this thing?

Disable the add-on AOL until AOL will fix it.

My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

Resolve a problem with a USB driver

You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

Steps to fix this problem
1. Adjust your computer's power settings
  The following power settings may help reduce the frequency of this problem.
  1. Turn off the USB selective suspend setting:
    1. Click on the Start button .
    2. In the search box, type power options, and then press ENTER.
    3. Find the plan selected, and then click change plan settings.
    4. Click change advanced power settings.
    5. Double-click the USB settings , and then double-click on USB selective suspend setting.
    6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.
  2. Disable power saving mode (computer portable computers only):
    1. Click on the Start button .
    2. In the search field, type power options, and then press ENTER.
    3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.
2. Look for an update of the BIOS for your computer system
  
  Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.
  
  What is the BIOS?
  
  The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).
  
  How can I find the manufacturer of my computer?
  
  Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.
  
  Click here to go online to see the contact information for most of the computer manufacturers
3. Download and install the latest updates and drivers for your computer
It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

What is a USB hub?

A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

To check for driver updates:
1. Use Windows Update to find and install updates:
  1. Go online to Windows Update
  2. Click the check for updates in the left pane, and then click view available updates.
    
    What happens if I see any updates available?
    - If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.
    - If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.
  3. Select the driver for your device updates and more updates to install.
    
    Note
    We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.
  4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.
3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.
Steps to work around this problem

Warning
These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.
1. Try to remove newly added USB devices
  
  If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.
2. Do not disconnect USB devices while the computer is to stop or go to sleep
This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

If you know which USB device is causing the problem

It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.
1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.
2. Do not physically remove the USB device.
3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.
  1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.
If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

computer that extends to the tv

Similar Questions

Maybe you are looking for