Concerns of recovery Toshiba NB250

Similar Questions

• Operating system not found on Toshiba NB250

  Hi all

  I have bouth Toshiba NB250 with legal Windows 7 Starter. 2 days ago I was on the internet my Nooteboom gel and I decide to reboot. I restart and OMG - there was only a black screen with cursor flashing after then it shows me that "the operating system does not.

  I have no backup of my windows, and I'm not taken... I know nothing about the HARD recovery disc but when I try to do it tells me there is no recovery. I decided to reinstal windows starter with USB and I create bootable Win 7 Starter. The problem is im reached the place where I can format my HARD drive, but is not avalibale

  Downstairs, I see that windows cannot install on this disk and advice me to load the drivers. I've done here to download the AHCI drivers but it tell me that these drivers are not compatible. The HARD drive I see as "non localized) and I guess my partitions are down or... I don't know." I have try other drivers for my Toshiba but I can reach that place before the format. and that's.

  Please advice what to do.

  > I restart and OMG - there was only a black screen with cursor flashing after then it shows me that "the operating system does not.

  It seems that the HARD drive is dead its defective and must be replaced sorry mate but it looks like you lost all the data that has been stored on the HARD:(j'espère que vous avez créé une sauvegarde de données dans le passé autrement je n t voir n'importe quel autre était à récupérer les données.) drive

• How to restore Toshiba NB250 to out of the box?

  I have a laptop Toshiba NB250-108, is a German keyboard layout if it makes a difference. I have no CD drive or the DVD software.
  I tried the system restore to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.
  Any help would be thank you very much.

  > I have tried restoring the system to out of the box several times with no luck, hold 0 (zero) button on start up, but only takes me to start modes.

  try pressing f8 at startup

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you can not start a recovery procedure, it means sth wrong with it (deleted/moved)

• Impossible to install Vista on my Toshiba NB250 - 10G

  Hello. Toshiba NB250-G, part No. PLL2XE-001001EN origin with win 7 32 bit.

  I try to install Vista for compatibility with the family machines. The installation proceeds to the collection of files and then stops with the following message appears:-error code 0 x 80070070 Windows cannot copy files required for installation etc etc. I suspect that the need for a pilot to precede the windows files.

  Can someone help me, please?
  T I J

  Hello

  I checked the Toshiba download page, and as I can see your machine is not supported for Vista. It relies for Win7 32-bit only, so, in my opinion, it would be better to stay with Win7.
  I don't know what kind of compatibility is important to you, but there is not much difference between Vista and Win7.

  I assume that you have created the bootable USB key with Vista. Start the Vista installation wizard is recognized correctly HDD? You can create or choose the partition where the OS is to be installed?

• How can I configure Windows XP Home for a Toshiba NB250?

  Hello

  I have a toshiba nb250 with a pre installed win7 starter.
  But I need a windows XP on this machine, and I can not configure it.

  How can I do this?

  Have you consulted the Toshiba download page if your machine is supported for Windows XP Home edition?

• Toshiba NB250 done by clicking on its intermittent

  I just got a new Toshiba NB250 and there is an intermittent rattling noise. In fact, it seems similar to a shutter of the camera, or eject a cd from a CD. It occurs even when the sound is muted. I think it could be related to food, because it seems to me only hear when he is on the grid.

  Is this normal? No other pc I've ever had has this sound, and I've had computers for more than 20 years.

  Hey Buddy,

  > because it seems to me only hear when he is on the grid.
  You can locate these sounds by AC adapter or he just really portable itself?

• Disc of some issues concerning the recovery of Toshiba Satellite A215-S7422

  Dear all,

  I have problem with my Satellite A215 - S7422 (AMD)
  I bought this unit included Windows Vista Home Premium + recovery disk inside the packaging.
  I love the Vista fitures, amazing!
  But some programs I've had has not supported for Vista. It's too bad for me.
  So, I tried to make new partition installed Windows XP SP2.
  The problem is that my Vista not appeared more.
  So I tried to recover my Vista with my recovery disk. But unfortunately, it has not worked at all.

  Issues related to the:
  1 can recovery CD did not work if divide us the hard disk (make a few partitions)?
  2. my recovery disk file is .tib, so I try to use Acronis Image, while I have my laptop running program has not detected DVD player. I try to copy the file to two disk partition recovery empty, I can see the .tib file, but it did not work also. Can you explain what causes probably?
  3. If I format all the drives that make a player, can Recovery Disc works?

  Please do me a favor for this
  Your help will be appreciated.

  I'm not quite sure how it works on the American series, but I think that it s not very different from the series HAD m.

  (1) No, you can not divide the HARD disk by using the recovery disk. The recovery disc will format the whole HARD disk and create partitions as at the beginning.
  (2) I doubt you can burn using other 3rd party programs. Toshiba has installed creator Toshiba Recovery disk that should be used to burn the recovery disk
  (3) as I said in point 1-> recovery disk will format the whole HARD drive. It s no matter how many partitions is created on the HARD drive. Everything will be erased

• Partition recovery & system NB250-108

  Hello!
  How can I recover/reinstall the SYSTEM (e) partition on my NB250-108 because I did something stupid and messed up my SYSTEM partition (E :) so that no software resides in this score now.

  The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  Please note: I'm still all software should I under the partition DATA (d :)) and its single partition SYSTEM (E :) software missing.) I hope not to have to pay for the recovery DVDs!

  Thanks a lot for your help and your suggestions.

  Hello

  > The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  No, you can't download the image of Toshiba.
  If you want to install the Toshiba Recovery disk image, then you must order the CD from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then you would be able to reinstall the image of Toshiba, but for this you will need an external USB CD/DVD drive.

  The other possibility.
  You could install a fresh Windows 7 operating system with a USB key.
  To do this, you would need something like Wintoflash
  http://WinToFlash.com/home/en/

  Need driver can be downloaded from the Toshiba driver page

• Re: Unable to install Win XP from USB for Toshiba NB250

  Hello

  I would like to install windows XP by USB, but when I finshed install system files and restart the machine to start windows to resume the installation, this message appears:

  http://img64.imageshack.us/img64/7272/sam0955.jpg

  What is the solution?

  Hello

  It seems that the flash USB key has been configured incorrectly.
  Did you create the key using the Recovery Media Creator Toshiba USB flash?
  Have you received a notification that Toshiba Recovery Media Creator has created the stick flash to recover successfully?

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Factory recovery Toshiba does not lack of partition

  Hello

  Notebook PC no longer starts. When you insert a dvd - w8 to a fabrieksherstel (ex-factory) I get this message.

  + Fabrieksherstel kan niet worden uitgevoerd. Een vereiste stationspartitie Land. +

  + Resumption of the factory does not work. A required partition of a station is missing. +

  Can someone help me what to do please?

  You said that you have inserted Win 8 DVD to do a cover of the plant.

  You use the Microsoft Windows 8 DVD or do you use the Toshiba Recovery DVD 8?

  I put t know which model of laptop you have, but on newer models preinstalled with Win 8 some configuration changes are needed in order to boot from the disc.

  In the BIOS, you must disable secure boot and have switch to MSC mode

  Your comments would be appreciated

• Windows cannot complete the installation - Toshiba NB250

  Hello

  My netbook has been sitting not used and the road for about 6 months.
  When I tried to use it the other week he was very slow and kept crashing so I tried to erase the unwanted programs from him but I couldn't.

  The netbook kept crashing whenever I tried to uninstall programs and try to do something about this, even open internet explore took about 5 minutes, it's faster on 15, laptop of my father who has a huge 256 MB of ram in it! I gave up and decided to restore it to the factory settings. I found Toshiba HDD recovery option and follow the instructions.

  The way in which the process a window pops up saying "Windows could not complete the installation. To install windows on this computer, restart the installation '. I clicked on OK, all in all I rebooted the machine about 6 times with the same message.

  I tried to boot into safe mode and in the 5th test (previous 4 raised the same message) I "cannot start Windows.
  A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click "Next".
  3. click on "repair your computer".
  File: \windows\system32\config\system
  Status: 0xc00000e9
  Info: Windows could not load because the system registry file is missing or corrupt.

  Now, I bought a new USB drive and booted from that. The first time it kept freezing during configure them then wouldn't start at all. The second date he kept freezing and then took more than an hour to load windows. I left it for a few days, came back to him and all I could get is a black screen with a white cursor. I now need the netbook for Monday so try again.

  For tests 3 and 4 I run through gentle but end upwards with ' Window3s could not complete the configuration of the system. An attempt to take over the configuration, restart the computer. »
  Been several times since both trying without success. Currently looking for a hammer...
  There are now two different options for operating system on it, I tried both, but get the same answer at the same time.

  Someone has an idea, what happens?
  My warranty is I think (is there a way to check?
  I don't remember when I bought it! It was last year or the year before) so I don't think I can get any help from anywhere.

  Hello

  It is not easy to say what the problem is here. If the recovery image and HARD drive are OK, you should be able to install recovery image and use your neetbook with the factory settings.
  When you've got this netbook as a new machine, I assume you didn't create recovery USB support. Can you confirm this?
  > Now, I bought a new USB drive and booted from that.
  And what is recorded on this USB key?

  I can't say with certainty what the problem, but now you should test original recovery image installation and see what happens. In case the same thing happen over and over again, the problem may be related to the HARD drive.

• Method of recovery Toshiba - which has put in place is the best

  I bought a new laptop and on setting up it asks me to choose a method of recovery. The options are
  -Recover out - of - box-state (System Recovery Options are included)
  -Recover without changing the hard drive partitions
  -Get a custom size partition

  What is the best option to select?
  I think that the custom would be best once I have composed my recovery discs after the complete series but want to be sure.

  Can anyone help?
  Thanks smilee

  Hello

  -* Back to the out of box - the State (System Recovery Options are included) *.
  This Option affects your laptop in return, the factory default status. Partitions will be deleted and recreated, as it was the first start.
  Note: All data will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve without changing the partitions of hard drive *.
  All data on the first partition will be lost, and the HARD drive recovery Option will always be available, if you want to find your laptop again.

  -* Retrieve a custom size partition *.
  All data on the HARD drive will be lost and the recovery of HARD drive Option is not available, if you want to find your laptop again. Make sure you have a DVD created for the future of recovery

  Here the FAQ
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• Using recovery Toshiba and Applications / drivers DVD Tecra M2 series

  Hi all, I have a problem to format my laptop Tecra M2. When the installation starts, you will see an error at the Command prompt. the error indicates
  Failed installation aborted/a process!
  A:\ >
  Please help me how to fix it

  Can you please explain what you do exactly?
  Do you use the Toshiba Recovery CD facilities to install the OS?
  Please describe what exactly happens when you start recovery image.

  Applications/drivers CD/DVD, you can use if you have installed the OS using the facilities of Microsoft CD.

• Equium A100-338 - Missing recovery Toshiba in the menu Wizard

  I have a Toshiba Equium A100-338 I need recovery to factory settings.
  I know I have to press f8 and go to the Toshiba Recovery Wizard.

  My problem is that this option is missing and has been replaced by 'Restore the whole Windows operating system'. When I click on this option, I get a generic message, saying that I have to restore from a restore CD.

  My question is, is it possible to manually start the recovery in the command prompt? The wizard needs to run a program. All I have to do is find this program. I know that I have the recovery partition (I used Ubuntu to recover files of the user, and should it upward).

  Hello

  Just a simple question: If you have problems to start the HARD drive recovery, why you n t use the Toshiba Recovery disk?

  It can also restore settings from the factory with all the drivers and tools, so it of the same wait it erases the entire HARD disk.