any other video player sansa have a loop function?

Similar Questions

• Once I used internet I can't use any other program. I have to restart my computer to be able to use the computer again.

  I use internet often and everything works OK. After I log out, I can't use any other program in my computer, Google Earth, Microsoft Office, Microsoft Works, etc., the computer can not open any program. The only thing that works is the Start button, but no program works. Any suggestions will be greatly appreciated.

  Hello
   
  1. What is the error code displayed when programmes fail to open?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
  
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
   
  Note: please follow step 7 of the article mentioned above to start the computer normally, once completed the necessary troubleshooting.
   
  Method 2

  If you still encounter the same question please you start a computer in safe mode with network and check.

  
  

  Note: in case you have a wireless connection you will need to perform additional steps to connect to the in safe mode with network wireless internet.

  Start your computer in safe mode with network.

  
  

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  Scan you computer for infections.

  Microsoft resources and advice for the removal of malicious software and viruses (Microsoft Security Scanner)
   
  http://support.Microsoft.com/kb/2671662

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  I hope this helps.

• My garmin gps is considered unallocated disk1 on my windows xp machine, but works fine on any other machine. I have re-installed all my drivers but still the same problem

  My Garmin GPS recently stopped to connect to my PC, I hear the beep when it connects and the driver is loaded in Device Manager, but appears as unallocated disk1 in disk management and will not assign a drive letter. It works fine on any other machine. (The same thing happened to my nook also color).
  Here is what I tried:
  1. tried all ports USB - same effect
  2 uninstalled/re-installed all the usb drivers
  3 remove the controller device manager usb and windows allowed to re - install.

  I am currently at a loss as to what else to try

  Kind regards

  Sean

  Hi Sean,.
   
  Check if any firmware or the last update is available for the device from the manufacturer's website.
   
  Updates & downloads
  Communicator Plugin software version 2.9.3
   
  You can also run the troubleshooter from the link given below and check if that helps fix the problem:
  Hardware devices do not work or are not detected in Windows
   
  Additional information is available at:
  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway

• YouTube videos, or any other video dose not play keeps buffering that I made?

  YouTube videos or videos, not play not only buffering

  Hello

  Thanks for posting the query on the Microsoft Community Forums.

  It seems that the videos are not working and keep buffering. We will analyze and identify the cause of the problem.

  Please answer a few questions to refine the question.

  1. are you aware of changes to the computer before the show?

  2. you use Internet Explorer as the default version? If so, what is the version installed on the computer?

  3. who is the operating system installed on the computer?

  4. do you get an error message?

  If you use Internet Explorer, you can perform the steps described in the article and check.

  Method 1:

  Run the provided Fixit:

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety

  Method 2:

  You can perform the steps and check:

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Hope this information helps. Get back to us if you have more queries about Windows.

• Firefox 4 causes my toolbar of the window to freeze! It also uses a huge amount of memory, 220 000. more than any other program.

  Since the update to Firefox 4 my Windows toolbar crashes after a few minutes. Firefox also uses a huge amount of memory. More than any other program and I have a lot of powerful programs. This time 222 000. More than any other program. Critical problem.

  I am glad that you are making progress. With all the Firefox test gets I was optimistic, such a problem could not escaped, and that the problem is more likely to be on your own computer.

  P. S.
  
  Note there is also a bug not fixed in Firefox, causing several plugincontainer.exe to launch even for disabled plugins turned off cookies (or history).
  (see comment under and /questions/812618 #answer - 175409 )

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I found a site of 64-bit. Anyone recommend it or have any other?

  I found: http://www.start64.com/index.php?option=com_frontpage&Itemid=1

  It seems to be really on the 64-bit computing. There are programs to download, drivers, etc (I think that too many games, but I'm not a gamer).

  Can anyone recommend this site, or others like him?

  I found it because I have a 2.0 ghz processor and 64-bit Vista home premium on my laptop. Since it is 64-bit, I want to get a photo, music, video and making 64-bit programs Edition that will run on it and nothing else. I know that I am limited to files h.264 or mpeg 4 (I think that they are the same) for video becaue of the processors, but I want 64-bit programs.

  If this should go in another forum? That is, since it's on 64 - bit as a whole.

  Looks like a good site.  You should not repost this in any other forum - here will do just fine.  People can search the forums and find out if they are looking for it.  Moderators will merge the threads anyway so just leave it here.

  I suggest that you find out what follows where there are many other 64-bit Web sites and download sites and other sites based on the 64-bit computing:http://www.bing.com/search?q=64-bit%20websites&mkt=en-us&FORM=TOOLBR&DI=6244&CE=14.0&CM=SearchWeb.

  Here is a list of compatible software, tested on a Toshiba 64-bit, clocked at 1.6 GHz machine:http://www.astahost.com/info.php/64-bit-vista-software-compatibility-list_t17477.html.

  Thanks for the link and I hope that the links above help you and help others as well.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The update for the video player is for Windows, I have a Mac, is an another scheduled update?

  I received two notifications that the video player for Firefox should be updated. When I try to install the update, I get the message that it cannot do so because it is impossible to run Windows applications on a Mac. An update is planned for Macs? Also, if an update is only for Windows, is there a way I can indicate that I don't need, so I continue to receive messages?

  You have malicious software! (Yes, Macs can get malware).

  Please remove this extension and see if that helps: MediaPlayer 3.3.2

  You can do this on the page modules. Either:

  • CMD + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then find this suspicious extension on the right side and remove (or, in case of doubt, disable).

  Often, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Which solves the misleading guests?

• I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1MK12K6DTY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1 * TY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  < personal information under the direction of the host >

  Only when you buy a new Mac. Since the end of 2013 the app came with the purchase of a Mac.

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• Can I have any other downloading my files on iCloud?

  Can I have any other downloading my files on iCloud?

  Welcome to the Apple community.

  Through participants of applications such as Pages.

• I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  T

  I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion.  Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page?  Thank you

  Yes.

  (137273)

• Create custom codes such as on any other computer user doesn't have to manually add all files

  I'm developing an application where all the sub screws must use the error of the master vi where vi master generates a custom error. Sub screws could base their action according to what a mistake he has received. What is the best way to define custom errors so that custom errors are added automatically when a user on any other computer using my screws? also, how should I throw custom errors based on a condition say after 5 minutes I want to generate a timeout error?

  Even if it is a good idea, you know your application very well, so if it sounds good to you even, we are happy.

  One thing, I mean, you can actually have a file (text, excel) to store these error codes and description.

  Advantage of it is, later in the future if you want to add/remove all codes, you don't have to change the code, or build exe

• have been sent an email but we didn't come in my box of reception or any other file or folder

  have been sent an email on May 8, but it didn't in my box of reception or any other file or folder. I know with certainty that it was sent to me that I was on the mailing list, and got everyone but me... Please help as it is an important email

  Contact the sender and have the email sent again.

• I have Outlook Express 6, in the tool, under the spelling, under Languages tab, only the cottage FRENCH, I need English, how can I change if it does not give me any other choice.,.

  In other words, I don't have any other choice in languages WHY?

  I would not all languages as a choige, or at least English?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm