Conditional tags build... weird behavior?

Similar Questions

• Wide edge Tags build conditional

  Can you add conditional tags build a book so that each chapter has the same configuration?  And then you can set the tag once for the book, update and reap the benefits?  Or do you do chapter-by-chapter-by-chapter-by-chapter-by...?

  Thank you.

  Select all necessary files in the book and file > import > Formats in all at the same time.

  You can manage Cond text compared to the level of the book by selecting the chapters in the book using the view menu

  -Matt

  @mattrsullivan

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• Build Conditional Tags - problems when generating content

  Hello

  Just wanted to print 4 pages of a long aid project so I added the compilation conditional tags called "ad-hoc" and created a print Doc SSL where ad hoc was conditional create value.

  When I generate the document I am making everything always. Am I particularly thick today?

  I tried marking all 'online', and then adding the ad hoc tag to pages construction the condition as 'online' AND 'ad hoc', but then nothing.

  Help appreciated as never.

  Nick.

  @Tompsk on Twitter.

  I don't think that the tag a wide impression is necessary. If you apply credits for all the subjects, then remove some before generating applied online with NO of GENERIC help, you will get only the items which you have removed the tag. No need to apply another.

  If you want to print, then forget about tags, just a print layout where you select only the items you want in.

  Printing works in the opposite way to online. Impression, that you include, online, you will need to exclude.

  See www.grainge.org for creating tips and RoboHelp

  Follow me @petergrainge

• condition tag applied to insert to insert text not hiding all the Insert

  Hi all

  I am running FM12.0.2.389 on Win7-SP1 (64-bit) laptop with i7 & 16 GB of RAM.

  As Arnis had mentioned on a post on the use of tags condition with tables, applying the condition for the character of point tag insertion conceals the entire table when you hide that tag. It's the way I always saw tags condition applied to the insert text, too much work. However, this is not what I see now, but I don't know if what I'm seeing is "as expected" typical behavior, or a new change since FM9 (jumped FM9 FM12), or if there is a problem with my installation of FM. "."

  Here's the scenario: I have FM files that serve as overlays of text in multiple documents ("insert FMs" for clarity). The entire library of files FM has deployed several condition tags and variable to accommodate more boundaries between nearly identical products, U.S. / International English and more short documents output the same set of source files. For the sake of discussion, I'll use an example which includes 4 labels of condition:

  • 3D (specific products)
  • LI (specific products)
  • Kit (specific output)
  • Installation (specific output)

  Insert FM has 3D and LI tags as appropriate. Container FM has 4 of all labels in the game. The tag is the FM Kit insert insert text for the Insert marker. When I'm running Kit, I can show 3D or LI and achieve the expected results. However, when I hide Kit, text inside of the FM which is tagged with insert regardless of the specific tag always present, even if the rest of the FM in medallion is hidden. I am pleased to provide you with a ZIP of the files needed to use as a sample.

  I don't remember ever having this problem in FM7 or FM8 FM9. (I was a user of FM since the FM5.5 and the use of tags condition since FM6.) Is this normal? Is this a change designed as? Or am I facing a sort of weird corruption of my particular FM installation?

  Thank you

  René

  Hi René,.

  A text overlay behaves in a similar way to a table. It is anchored at the insertion point, and you apply the condition to the anchor to condition it. When you apply the condition to the Insert, all content conditionally marked in the box becomes a combined condition, i.e. the Insert with 3D and conditions of LI now has Kit, Kit & 3D and conditions of Kit & LI.

  Therefore, you have to build the Boolean expression to show or hide so combined cases. In order to hide the KIT and 3D interior and conditions LI of the Insert, the Boolean expression would be:

  not ("Kit" or (("Kit" et "3D") or ('Kit' and 'LI')))

  Simply hide only Kit will not hide a combined condition (e.g. Kit & 3D).

• How the conditional tags can be viewed without installed RH?

  Hello

  I use RH9 to create chm HTML Help files. I have two tags conditional configuration. Everything works fine to build the chm. I would like to somehow show the content of each conditional tag.  This isn't a problem for someone who has RH9 you can go to the reports to see the topics that are associated with each tag and then display the topic that presents the text associated with a tag.

  However, if a manager needs to review that which accompanies each tag but isn't RH9, how I would give them something that shows them the content that goes with each tag?  Which gives them 2 different chm files to compare it won't because there is just too happy to determine the differences.

  Thank you

  John

  Good, a few thoughts...

  For the tags applied to all subjects, you could create a set of frameworks that would allow the two subjects to be displayed simultaneously. Each side-by-side or up and down. Which could allow an easy comparison.

  And I thought that for content, you could code the text color. But it would probably be a little a lot of work. My thought was that you could create and apply styles that cause the color coding to occur. Only set them in a sheet of unique style that would apply only to generate the file CHM 'review '. Then, you must use the original style sheet required during the generation of the final output.

  See you soon... Rick

• Conditional tags - how to exclude files from the output

  Hi all

  I am trying to exclude certain topics (books) of the generation by applying the conditional tags. It works very well and these books are excluded from the table of contents; However, section files are not excluded that the output size is exactly the same. The items I must exclude are huge video tutorials. It seems that HR changes only the TOC when applying conditional build tags.

  Any ideas how to ensure that the files of excluded topics are not in the output?

  Thank you

  Hello

  If the subjects are actually excluded or not depends on exactly where you added the conditional tags. If you haven't been tag elements of the table of contents, all that is remove entries from the table of contents.

  My suggestion is to wipe the table of Contents formatting per tag and add the tags to the subjects themselves. Then, they should be excluded. And when they are excluded, they will disappear also the table of contents.

  See you soon... Rick

• RH9 conditional tags works do not

  Conditional compilation tags worked before and now are not. I went to the bottom of the list of things and cannot understand what is wrong, or what I have done to stop them.

  When I right click the topic in the topics list tag, then click on Properties > advanced, the condition of the internal Web site is verified correctly. The status of the broker site is not. When I publish them, the topic is displayed on both servers, not only that I checked.

  I clicked republish all to make sure that each file is published, just to make sure the condition goes there. Still nothing.

  The subject has this Green highlighting on the table of contents, so Robohelp believes that a condition has been applied.

  Here's what I changed, since it worked:

  • I changed the path of publication for the Web site project broker - one who shouldn't display the topic. The new directory displays the topic (wrongly). The old directory with the old files is still not (properly), when I run the project from there.
  • I started to publish the project to both servers at the same time rather than separately, I did during the initial test. Yet, when I look at the file download dialog and check the timestamp in the directory, files go to the proper places. When I unchecked a download and the paths will be published separately, it still doesn't work any more.
  • I changed the name of the State for the broker's Web site. However, I never checked this box - internal name for the condition remains same site and it is the only project that counts in this test, because the internal subjects should not be published on this site. It shouldn't matter, but I'm there understood because I changed it.
  • I deleted the subject and put it back, going through each of the steps conditional tag, and then republish.

  Are there any other variables that I forgot? Help, please!

  Thank you!

  Hello

  In your categories of content, you must specify what conditional build tags to exclude:

  

  Take a bow

  Willam

• Topics marked with the conditional tags still appear in the documentation

  Hi all

  I have a big problem with RoboHelp 7.

  I defined a new conditional tag (I have 2 together) and I mark the topics in the table of contents with relate to this tag conditional, right?

  When I generate the chm file, everything is OK. The headings marked with the conditional tag do not appear in the table of contents that I specified to exculde subjects marked with this conditional tag.

  When I generate documentation however, everything is still in the document even if I was clear that I don't want these subjects to appear.

  Can you please tell me what I'm doing wrong, or how can I properly so that I get my results?

  I am using Windows XP Pro and RoboHelp is updated with all service packs.

  Thank you

  Bogdan sailor

  Right-click a topic in the table of contents and select apply the tag build conditional. Check out the new / Multiple option.

  This screen displays.

  

  You can clearly see if the tag is applied to the table of contents or the subject. If it is applied on the subject, so it will be not when generating table of contents entry will be automatically deleted. If it is applied to the table of contents only, he is always in the build.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• RH8 post-conversion, are completed space expression conditional tag

  We have installed just RoboHelp 8. After having converted my 3 projects of RH7 RH8, the system has added build spaces between the words of a condtional expression. That's fine because it is much easier to see the words - which represented an improvement over version 7.

  However, it is also add a space after the conditional construct sentences, which is incorrect. It adds a space before a comma, adds a space before a period if the conditional compilation expression occurs at the end of the sentence, etc. But it doesn't seem like it does in all cases... I don't know why it does this, but it has happened after the conversion to 8.

  The generated help is displayed as in the example below. Note the space before the period in the first sentence and the space before the comma in the second sentence. He did it on a few pages.

  Customer definition details

  This page allows you to add a new customer or modify an existing customer. If you add a customer, you must complete the details and then save it.

  Tried to download the example of conditional compilation expression, but it is not letting me.

  Thank you in advance for any help you can offer. It would be a lot to fix it manually, so I hope someone knows how to solve this problem by using a parameter.

  We have the same problem.

  Our workaround solution should not use the conditional tags in a sentence, but rather have 2 separate versions of the same sentence and put the conditional tags on the sentences.

• Weird behavior of Safari Dock icon

  For several months now, I noticed a weird behavior of the Safari icon on the dock.

  Note: I have the Safari Dock permanently icon in the dock if the application is running or not for quick access.

  With open Safari, after periods of inactivity or after the awakening of the mode standby, the icon will lose the small black dot on the bottom that indicates an active application.

  By clicking on the icon or a .webloc file reveals that Safari is still active, but because the icon does not animate as it does when it is launched.

  How can I fix and when Safari * is * open its Dock icon indicates that it * all the time *?

  Probably also related...

  All too often, after similar as scenarios above, Safari actually leave - all on its own.

  How can I fix this too?

  Safari has also been freezing quite often lately have to be re-launched or sometimes requiring a restart of the computer system.

  Something is not.

  Go step by step and test.

  1. Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  2. Quit Safari if it is open.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library', then 'Caches.

  Find the folder "com.apple.Safari".

  Right-click on "com.apple.Safari" and select "move to trash".

  Restart Safari.

  3 remove the test and com.apple.Safari.plist file.

  Empty the trash.

  Quit all applications.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Preferences > com.apple.Safari.plist

  Right-click on it and select "place it in the trash.

  Close the Finder window.

  Turn it back on.    Restart Safari.

  If this does not help, "put back" the com.apple.Safari.plist

  Right click on the trash icon in the Dock, then select 'open '.

  Right-click on the com.apple.Safari.plist and select 'Put Back'.

• Weird behavior of Firefox in Facebook when scrolling down

  Hello

  My Firefox has a weird behavior when I open Facebook and start to scroll, I have attached two images, first image is when I open facebook, everything is ok (I dimmed the contacts), second image is when I start scrolling down, you will see square masive black with blue navigation. That happens only when firefox is "enlarged" and not with windows. I also try to disable all addons or run firefox in safe mode I have also reinstalled it and the problem is still there. Have any suggestions, which could be bad, also if forgot to tell you that any information not hesitate to ask and I will it provide.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Weird behavior with Signal to simulate and loops

  I'm having a weird behavior with Signal to simulate and while loops. Attached a photo of my program. The problem I have is that when I use Stop to stop inside while loop, then use to restart the inner loop, simulate Signal instantly generates a bunch of points of data between when I pressed Stop and Go. By example, if I stop for 5 seconds, wait 5 seconds, then press Go, it will instantly generate data for t = 5 t = 10. What I need is for the generation of signals to stop when I press stop and continue where it left off when I press Go. How can I accomplish this? I have no idea why he exhibits the behavior described in the first place.

  Hi optometry.

  Can you give us a screenshot of the configuration window for the VI express to simulate signal? I was able to reproduce the problem when I used "Simulate the time of acquisition" at times, but the VI's are featured as you described you wanted when I used "run as fast as possible." Have you tried this setting?

• Weird behavior of the wifi service

  My project showed very weird behavior. As in the connection of signals and slots he was segfaults. I posted that in here . Also, I couldn't create a QTimer object. This all happened after I have use some features of the wifi_service.h file. My CPP code file is subsequently

  /*
   * WifiController.cpp
   *
   *  Created on: Jul 4, 2013
   *      Author: Roland
   */
  
  #include "WifiController.hpp"
  #include 
  #include "GeoNotification.hpp"
  WifiController::WifiController() {}
  WifiController::~WifiController() {}
  
  int WifiController::toggleWifiState(bool state)
  {
      getWifiState();
      int status = wifi_set_sta_power(state);
      return status;
  
  }
  int WifiController::getWifiState()
  {
      wifi_status_t *status;
      wifi_get_status(status);
      if(*status == WIFI_STATUS_BUSY)
      {
          return 2;
      }
      if(*status == WIFI_STATUS_RADIO_ON)
      {
          return 1;
      }
      if(*status == WIFI_STATUS_RADIO_OFF)
      {
          return 0;
      }
  
      return 0;
  }
  

  The strangeness begins after I call the getWifiState() function. It fills the fi last statement and returns 0. But after these problems occur. But if I don't call this function then, everything works fine.

  This will produce undefined behavior:

  wifi_status_t *status; // unitialized address
  wifi_get_status(status); // wifi_get_status will write into random memory
  

  wifi_get_status waiting for an address of the variable to write to:

  wifi_status_t status;
  wifi_get_status(&status); // & takes the address of status
  

  You will also need to check the return value of wifi_get_status. An example of code:

  http://supportforums.BlackBerry.com/T5/native-development/check-the-WiFi-signal-with-quot-WiFi-get-s...