Conductor Cisco - no more license problems

Similar Questions

• License problem of security context for Cisco ASA 5585

  Hello

  Can someone help me in license number for the ASA 5585 security environment,

  We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.

  When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.

  Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?

  Please advise me on this.

  Thanks in advance!

  Kind regards

  Kam

  Hello

  This should probably not be handled with Cisco directly or through the company that got you the license.

  To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.

  I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.

  While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC

  Check this document:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400

  -Jouni

• MAB DEVICES CONSUME MORE LICENSES

  Dear team,

  We have the ISE servers with basic license. We use the ISE services only to the Dot1x for users authentication and authentication for Cisco IP Phone MAB and printers on the network. We are assigning VLAN dynamic for all devices. AFAIK, MAB will consume only BASE license but now, MAB devices consume more Cisco ISE license.

  We run ISE ver 2.0.0.306.

  Please advise if anyone had faced this problem before.

  Thank you best regards &,.

  JALEEL LAJAN

  Ok.

  If you see 5 features contoured, ISE don't care on the point of view of license. There aren't any count in license OVER its use.

  On your screenshot, you use a group of the printer which is a child of Registereddevices. I think you use this group on the rules of the ISE, all authentication/authorization, passing by this rule that MORE license.

  You must create another group with no parent group and you'll never SEE license counters.

  Hope this is clear.

  PS: Please do not forget to rate and score as good response if this solves your problem

• HA possibility of twinning? two ASA5520s, one with Anyconnect Essentials with Anyconnect more licenses - can these two equivalent license types HA pair successfully?

  I have two ASA5520s... we have 750 Anyconnect Essentials licenses and the other 750 Anyconnect more licenses.

  These can two successfully pair HA or I need to have both on the same exactly the type of license?  that is the two Anyconnect more...

  Thank you!

  HAL

  Hi hmcandrew,

  As far as I know, you need to require one of the ASA on the other to run in failover mode.

  Maybe if you run them in a private network virtual-balancing of the load in place, they will be able to work, but it will not give you HA.

  Please see the following link for more information:

  https://supportforums.Cisco.com/document/67701/ASA-versions-image-names-...

  Please rate if you find this information useful.

  Kind regards

  -Javier-

• the volume appears to contain one or more unrecoverabble problems

  I had a windows pc wth dual boot XP after that I did a system restore to a date that precedes a installed the second version of windows XP my computer start your ups Loopy I can't start in safe mode. I started upward with the recvory cd en windows got massage when I did a chkdsk. the volume appears to contain one or more unrecoverabble problems

  FIXBOOT cannot open the partition

  I had installed a new version on the patition even.

  When I start my PC after the windows screen reboot pc looped you.

  I solved the problem with BartPe. I did a chkdsk and now my pc works well

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.

• What to do about CHKDSK message "volume appears to contain one or more unrecoverable problems".

  My XP Home just quit starting all along.  Previoously before leaving he would do a CHKDSK scan and then go over to start.  Now, it closes a few seconds after the Windows screen comes up with the dots that runs through.  The Windows image stays on the screen, but nothing else happens.  I put in my XP disk to run the repair and got at the C:\Windows prompt after all the various commands of the finish.  Then I typed CHKDSK and Enter.  The first time that CHKDSK has stopped 38% full.  The 2nd time it finished and gave me the error message: "volume appears to contain one or more unrecoverable problems".

  I sure would appreciate it if someone can suggest my next move to get XP running back?

  http://www.computerhope.com/issues/ch001214.htm Hope this helps, Gerry Cornell

• 2000 Basic and advanced license we run ISE 1.2, if we update 1.3, what happens to the license we must buy more / license apex

  2000 Basic and advanced license we run ISE 1.2, if we update 1.3, what happens to the license we must buy more / license apex

  When you migrate to 1.3, your license will be updated, advance licence, become apex

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Cisco has any license demo for VCS?

  A way to study, I would test the VCS to my network for a while.

  Cisco has any license demo for VCS?

  Hello

  I think you get very limited (1 x traversal/1 x no traversal) licenses if you have installed the software.

  See also this thread; You can get a limited time license team demonstration license if you ask him nicely.

  https://supportforums.Cisco.com/discussion/11555961/home-lab-VCs-and-TMS...

  Aaron

• How can I get more license Adobe connect?

  I need more licenses to adobe connect and the previous Administration put an end to his job at the company. I need some information, how it works, the cost per license and how to do it.

  Please see:

  Acrobat Connect Pro help | Acrobat Connect Pro Support

  Adobe - Center of Customer Service: Adobe Acrobat Connect Pro Service Plans

  https://www.Adobe.com/support/programs/connect/

  Concerning

  Stéphane

• I'm trying to redeploy Adobe Acrobat Standard DC to my users, because the licenses have been removed by mistake; they have up-to-date copies on their computers desktop and I got more licenses for each of them. My question is that each user will have to go

  I'm trying to redeploy Adobe Acrobat Standard DC to my users, because the licenses have been removed by mistake; they have up-to-date copies on their computers desktop and I got more licenses for each of them.

  My question is that each user will have to go through another download and installation of the product?

  I don't think. I guess that they would be required to sign in or provide the number you gave them. Acrobat would continue as a trial until they click on "license this software ' or see help > Sign In.

• several essential elements more licenses - quick Q

  Hello

  I was invited to configure vCenter for a company that bought 2 × essentials more licenses (v5). It have 6 guests so I will have to create 2 x Virtual Center servers

  servers? I wasn't sure if the 3 host limit has been applied to the vCenter or at the cluster level.

  See you soon,.

  Huw

  Yes, each Essentials kit (up to 3 guests) should be handled by its own Server vCenter.

  André

• Cisco Jabber with Cisco multi-party Shared more Licenses

  Hello

  I'm looking for a Solution to video conference for approximately 4000 employees. Currently the customer uses Cisco's Jabber for video calls from point to point. The main requirement is Ad - Hoc videoconferencing by any employee at any time. I looked at both meeting of Cisco and Cisco TelePresence Server server. The two solution requires more or licenses more pluralistic multi-party Personal shared. The customer won't buy a PMP license for each user. Their requirement is multimedia resources shared so that any employee can initiate an ad hoc conference.

  Now the question is: can we use Cisco Jabber with multiparty licensing shared?

  Thank you

  Mockus S

  Yes, it is quite possible.

  The only singularity is with PMP + which applied slightly differently than the head of the Orchestra/vTS. This does not seem to match your use case since you intend to buy only SMP licenses +. From version 2.0 (1) CMS, PMP + licenses - which are less expensive than SMP + - use only if: a) the space belongs to a LDAP user with a PMP + license for which they are responsible; or (b) If a user LDAP with PMP + assigned to them joins the Cisco meeting App space as an authenticated user. In all other scenarios, including ad-hoc escalation with CUCM licensed SMP + is consumed. This is different from that of head of the Orchestra/vTS, which were also able to understand the right to the user for ad-hoc calls.

• Cisco 861 ezVPN license remote problem

  I bought a new Cisco 861 SRI with safety advanced on this subject.

  When I look in the Dashboad license in Cisco Configuration professional it tells me I have advsecurity licenses with deployment status 'Deployed' function and the State 'active, in use '.

  But when I want to configure any type of VPN I get the following error message:

  License of technology (advsecurity) associated with this feature is not deployed on this router. Use the link below to deploy the technology license.

  When I click the link I find myself in the dashboard to license again.

  I Don t have another file license and advanced security features should be sufficient for VPN. At least that's what

  http://www.Cisco.com/en/us/prod/collateral/routers/ps380/data_sheet_c78_461543.html said.

  What should I do to be able to configure the VPN?

  Thankx a lot for any help

  Dirk

  What version of CCP do you use?  I see a few other customer cases with this error and it looks like there may be a problem with CCP 2.5.  Customers who use 2.3 CCP do not see this error when applying the license through the user interface.

  Todd