Conference Control Center problem

Similar Questions

• Catalyst Control Center problems in Windows 8

  I have recently upgraded to Windows 8, and I get a message telling me that I have to reinstall ATI Catalyst Control Center to make it work properly.  There the resolutions on this subject at the moment?

  Hello lecjones.

  Have you tried the catalyst (Preview Release) which is available for Windows 8?  Be sure to check if your card is among those listed as supported.  Make sure that you remove completely any attempt of previous installation before installing this.

  Here is a link to the downloads page.

  I would like to know if it works for you.

• TMS conference control center

  Hello community,

  We have TMS version 14.6. My question is why we cannot see the screenshot of the endpoint on the control of TMS conference center?

  The endpoint is SX80 TC7.2.3. We do not have the key Option Remote monitoring installed on the endpoint. Is this the reason why we cannot see the snapshot? Do we need to buy the key to activate it?

  Monitoring.PNG

  

  I expect this on our TMS:

  remote_display.PNG

  

  According to the names of devices hosting the conferences, I guess that for the image where no snapshots are seen is a driver (cisco-cndtr), and the other is a MCU (MCU - SD) product?

  If this is the case, snapshots are not supported with the conductor, see CSCuj02741.  When you use the driver, only a subset of the features of CCC are supported, see the section "Follow-up Conferences" of the CMR premises Solution Guide release 7.0 on pg 28.

• Catalyst control center problem

  I'll have a run inspiron 5537 win 8, two days until I get a window saying ' catalyst Control Centre: host application has stopped working ".

  What is the menaing of the present and what should I do for this?

  the AMD driver via windows update update

  or

  Just uninstall and reinstall the driver AMD

  or

  Go to c:/users/your_name/appdata/local and remove the ati folder. If you do not see files enable the hidden folders and uncheck Hide protected system files.

  or

  Refer to the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Catalyst-Control-Centre-host-application-has/0a0ef1b0-117D-43D8-a43f-9b24228b660b

  It will be useful.

• Operator in TMS version 14.6.2 conferences - surveillance > Conference control

  The Conference operator option is not available in TMS > surveillance > Conference Control Center on scheduled or Ad Hoc conferences.

  This option is only visible to the admin user? Help, please.

  14.6.2 TMS version and endpoints are managed by CUCM.

  What conference bridges use you, conductor involved?

  As long as you have full access to the CCC, you should be able to see the option. Conferences of the operator are supported only with MCU that is managed directly by TMS and not behind a conductor.

• problem of sliding iPad Pro Control Center.

  I can't always drag up the control center with my new iPad (always within 14 days) Pro. This happens only in portrait mode and only over the side of the "home" button (if I rotate it 180degrees it works fine, but then the notification Center does not work on the side of the "home" button.)

  After a hard reset, it started to work again, only to stop a few minutes. Initially, I bought he kept not only work in certain applications (http://bit.ly/joc0zm and Safari) but now it seems stop working everywhere.

  Someone at - it; She has known/fixed this? I guess it was a hardware problem, if it wasn't for the fact that a reset can fix it for a while.

  I have the same problem.  When the control center will not slide up, the notification Center also didn't slide once down.  Any solution?

• the Catalyst control center host application has encountered a problem

  the Catalyst control center host application has encountered a problem and needs to close

  Hi Chowder53,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  That would happen if the card drivers to display on the computer must update or corrupt.

  I suggest that you manually download and install the latest drivers for the display card on the display card manufacturer's site, check to see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• I uninstalled Catalyst Control Center who uninstalled a few other related things, one of them my videocard (problem of graphics)

  I uninstalled Catalyst Control Centre, where it took place, it kept blowing - rises, saying it had stopped working. I also read somewhere (not Wikipedia) the Catalyst Control Center was a virus so I uninstalled, which uninstalled a few things related to it one of them my video card I understand now manages the screen resolution, colors, my customization in Chrome color settings, and many other features which I'm just discovering. She brought to the resolution of the screen on my laptop (much it zooms) and reset all my customizations of color to the standard that I hate. I wonder if I have to reset my computer to an earlier date, or if I have to download a new video card. I downloaded the Catalyst Control Center and what came with it but nothing has changed now, options in the control panel > appearance and personalization are missing which is what I used to make my settings and where it let me normally the change of colors (I picked red) are all gone. The screen resolution is still a little low (which means its still slightly zoomed in) in what she was before, and how I liked it, but at least I can still do what I have to (I use this computer mostly for Facebook and games my whole life revolves around both of them, for me so it is essential that this problem may not seem like a large face you (, but for me it is!) So should I reset my computer to an earlier date or download something or what. Help me please. If I have to do a system restore could someone please tell me how or where to go?

  I use Windows Vista 32 bit Business. Thanks guys,-Zane.

  Hello

  First of all, try to download the latest display controls and see if still then restore the computer to a previous state, while it was working fine.

  http://www.ATI.com/products/catalystcontrolcenter/

  http://www.AMD.com/us/products/technologies/AMD-catalyst/pages/catalyst.aspx

• VAIO control center - access point problem

  I can't share my vaio control center network. It is passive. But I do can make adjustments in other menus such as keyboard lighting, battery maintenance, charging usb. Only the network menu does not work. Why is this?

  My model: sve15129cvb

  Thanks in advance

  

  Hello Burak,

  SVE15129CVB is part of the Asia-Pacific. See the following steps to resolve the problem:

  1. Activate the network wireless in the computer first:http://windows.microsoft.com/en-IN/windows-8/cant-find-wireless-network
  2. Reinstall the VAIO Control Center, after using VAIO Care.
  3. Press Windows + Q to open the search box.
  4. Type VAIO Care and click on enter key.
  5. VAIO Care > Advanced Tools > restore and Recovery > reinstall applications and drivers.
  6. For more information about how to contact a Sony facility in another country, please visit the following site: https://www.sony-asia.com/section/contactus

  If my post answered your question, please mark it as an "accepted Solution".

• ProBook G1 450: Problem with Catalyst Control Center

  So I'm a gamer and I want to improve my performance, so I searched around the internet and found a thing called the Catalyst Control Center and he had an option to Overclock, I thought it was a great idea to speed up my pc, so I downloaded it, but during the installation it says it found no compatible hardware? AFAIK the ProBook G1 450 have Intel HD 4600 Graphics and AMD Radeon HD8 8750 M, so what gives? Can I get help please?

  P.S. I checked the drivers and he said I had the latest drivers installed, so I have no idea what could be the problem.

  Try this driver http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_154962_1&swEnvOid=4192

  If still happens once, respond with error message.

• A security update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) cause problem with Catalyst Control Center

  I use the HP Pavilion G6 1117tx with

  AMD Radeon HD 6470 M driver version 8.882.2.0 i.e. graphics card and

  Intel Graphics HD 3000 driver version 8.822.2.0, it came as a complete with

  Microsoft Visual C++ 2010 version 10.0.30319 on the site of sellers.

  And after I installed upgrading security for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) it would cause a problem with the launch of the

  Catalyst Control Center version 2011.0817.2216.38121 the catalyst control center would launch and accident immediately but she always see the process running in the Task Manager.

  I removed all the drivers and the software associated with the control center catalyst with Microsoft Visual C++ 2010 and reinstalled all the package and tried the update, but still the same problem that led me to the conclusion the problem was with the update.

  Assistance would be appreciated. Thank you

  Good morning Mukul,

  Thank you for your response.

  I appreciate your time.

  Please refer to the suggestions marked as answer Andrew.Wu, Moderator on 24 January 2011 and check.
  https://social.msdn.Microsoft.com/forums/vstudio/en-us/10f5ba3a-b0bd-4f53-AC02-fa8634953dd0/Visual-Studio-2010-keeps-causing-display-driver-to-crash?Forum=VSSetup

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Please keep us updated on the status of the issue.

  Thank you

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Catalyst control center and ati driver problem

  I installed Nvidia Geoforce GT630 in my Inspiron 570... Windows 7... 8 GB ram

  Processor a Main Circuit Board b3.00 gigahertz AMD Athlon II X2 250256 kilobyte primary memory cache2048 kilobyte secondary memory cache64-bit readyMulti-core (2 total)Not hyper-threadedBoard: Dell Inc. 04GJJT A00Serial Number: ..Bus Clock: 200 megahertzBIOS: Dell Inc. A05 12/20/2010
  

  A window pops up with ATI Warning and the following message:
  

  "Catalyst control center is not supported by the driver version of your enabled graphics adapter.
  

  Please update your ATI graphics driver, or enable your ATI adapter using the Displays Manager"
  

  ----
  

  I can't find the ATI adapter in the Displays Manager. I seraced for a new ati driver but didn't find anything for my puter.
  

  Also, in the PNY instructions it had the following....which I could not find:
  

  If you purchased a PHNY GeForce PCI grapics card and if you have on-board graphics,
  

  enter the system's BIOS setup and look for a setting called "Primary Display Adapter" or something
  

  similar. Set this to "PCI". If you cannot locate this setting, please contact you system manufacturer blah blah blah.
  

  Anyway, there was no such setting in my BIOS.
  

  Anyone have an idea how to fix or get rid of the catalyst control center?
  

  Thanks
  

  Hi scottparat,

  Yes, please go ahead and uninstall the full program from the computer and restart the computer.

  Also in the device under the Graphics Manager that you need (either Ati or nVidia Geforce GT630).

  Please write back to us.

• no control center since the upgrade to ios 10

  I have a 6 Iphone and my wife has a 6 s Iphone.

  Both phones are unable to access the control center anymore.

  Sliding the lower does not work now.

  In 'Settings', on the lock screen and access in applications are enabled. I have reset all settings and it still doesn't work.

  Hi there, alfredfromAussieland!

  Thank you for using communities Support from Apple. From your post, I understand that you and your wife have difficulties to access the control center on your iPhone devices. I use Control Center frequently and know how convenient it is to control your phone through it. I'd be happy to help you find this feature!

  Resetting all parameters is a great step in this situation. Since it did not help, I would recommend first tried two methods to reboot your phone listed in this article, in the order shown:

  Restart your iPhone, iPad or iPod touch - Apple Support

  If the problem is still not resolved, it may be necessary to perform a backup restore your iPhones and their restoration to the factory via iTunes settings.

  Instructions on the backup on iCloud or iTunes can be found here: How to back up your iPad, iPhone or iPod touch

  Instructions to restore the factory settings can be found here: using iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch

  Once the restore is complete, configure each iPhone as new (meaning without your backups, at least temporarily) and check if you have access to the control center. If so, you can use the following article to restore your backups: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Other ways to access to the control center

  I'm a quadriplegic and can't touch to the iPad, but I use the switch access. That leaves several things that I can't because you have to do some kind of shot or another action.

  I was trying to find another way to bring up the control center, since I can't slide with my finger. I actually found a several months ago and put in a recipe under switches, but something went past and disappeared and I don't remember what I did. Any ideas?

  Also, I need to be able to implement all applications running in the background that must be killed. I can't double click on the home button. It any suggestions?

  I use the command with 2 switches. If that helps anything.

  Thank you! -Doug

  Hello WDMaples,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to access all the features of your iPad, and I have an article that should help you to implement the control you are looking for with your switch access. This article should help guide you through setting up the recipe to replicate hitting swipe and double click on the home button.

  Switch control: Basic Techniques

  If you experience any problems or have any questions, please let us know. The entire community is here to help.

  -Best regards-