Conference MCU SIP with VCS registration question

Similar Questions

• Comments of Jabber with VCS registered endpoint control and MCU

  Hi all

  According to my plans. I'll try to integrate comments Jabber with environment of Collaboration.

  Use cases;

  1. call between Jabber and VCS registered control EX90 comments

  2. Add Jabber comments a MCU conference where MCU part control VCS

  3. call between Jabber and Jabber comments

  Comments will be welcome :)

  Best regards

  Mesut

  Hi Martin,

  From Jabber comments 10.0, only #3 above is supported. However, we will publish JG 10.5 soon (I hope that in the next few months), and it will support all 3 of your above use cases. The only downside is to use #1 and #2 cases, you have a CUCM in the call flow.

• Profile C40 with VCS Starter Pack Expressway system

  Hello guys,.

  Customer not want options like Firewall and the Conference (MCU 5300) crossing.

  But as this is a small script (there around 2 profile C40 + 2 SX20 10 video Jabber), I found that it will be interesting using VCS Starter Pack Expressway. He's no more than 50 records or 25 route calls as shown in the data sheet 'support '.

  I took a look at the topis here and also some documents and say that C40/SX20 are not supported for the supply, but since the SIP/h.323 support, calls should work perfectly.

  No doubt: that the client will lose in terms of features or benefits without the support of this commissioning endpoints?

  It would be a pain in the neck to enter the SX20 or C40 to VCS Starterpack expressway?

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11315/ps11337/data_sheet_c78-697075.html

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Expressway_Starter_Pack_Deployment_Guide_X7-2.PDF

  Thank you!

  Alan

  Olá Alan, respenderei em inglês para fica na don't base dados, mas design sao best respondidas send any video Business forum.

  About your 3 points, depends on:

  (1) even if you deploy the TMS, endpoint will try to get the directory using HTTP/HTTPS connection. If the endpoints are outside / internet, it may be refused by security reasons.

  (2) you can always configure auth on the StarterPack VCS to auth against the local database. At the endpoints configured manually, you can enter the identification information.

  (3) you can configure the bandwidth on VC (subareas or pipes) configuration control or limit directly to each endpoint

  The SX/MX/EX/C series can register the StarPack using a direct connection (h.323/SIP) or behind the FW/NAT using H.460.18/19 or assent. They can local Auth VCS DB. Be aware that the VCS S is usually installed in an external DMZ or directly with a public IP address. In this case, if you have 2 x SX to the internal network and the VCS at the DMZ (with NAT in the middle), all media will be hollow VCS, even if the two SX are on the same subnet.

  PS: Be careful where to include the VCS. If you use NAT on the VCS, basic network license need double.

  It will be useful.

  Concerning

  Elter

• GW ISDN Cisco with VCS control

  Hi Experts,

  I'm new with Cisco ISDN Gateway 3200, and I will integrate to the existing video network managed by VCS control with the endpoints and MCUS registered as SIP.

  Here is an example of the existing video network numbering plan:

  SIP URI endpoint: [email protected] / * /

  MCU SIP URI: [email protected] / * /

  ISDN GW H323 alias: 54xxxxx

  I came up with these questions:

  1. for us intergate ISDN GW on the video network, we must save as H323 on the right VCS?

  2. to call scenario as a point endpoint SIP or MCU calling to one ISDN endpoint via video, how the call flow? Make the registered endpoint/MCU SIP point as SIP on the VCS can dial directly on this endpoint ISDN? Or they will call first the H323 number of ISDN GW recorded on the VCS then routed to an auto attendant of the ISDN GW?

  3. How about ISDN endpoint SIP endpoint?

  Please send me a sample of guide and the configuration of the ISDN GW and VCS about how we could improve the flow of calls work on the call scenarios mentioned.

  SIP---> ISDN

  ISDN---> SIP

  Thank you very much for the help.

  Best regards

  Acevirgil

  Hello

  1. For us to intergate the ISDN GW on the video network, we need to register it as H323 on the VCS right?
  

  Yes, it's true. This isn't the only method, but it is the most used and most easy way. I suggest you use it.

  2. For call scenario like from a SIP endpoint or MCU calling an ISDN endpoint via video, how's the call flow? Do the SIP endpoint/MCU registered as SIP on the VCS can dial directly on that ISDN endpoint? Or they will dial first the H323 number of the ISDN GW registered on the VCS then routed to an auto attendant of the ISDN GW?
  

  In this case, you will need to ensure interoperability the call in VCS. No matter what SIP endpoint can dial numbers ISDN, and then VCS will route the call to the gateway h323 format, only the number with any ' @domain.com ' and the call will be interoperability. The flow would be something like this:

  Point endpoint [sip] SIP----> - VCS [H323]---> Gateway ISDN

  3. How about from ISDN endpoint to SIP endpoint?
  

  The same concept is applied. ISDN gateway sends the call in H323 for VCS and interwoks VCS the call and sending SIP endpoint. Something like this:

  SIP endpoint<-------[sip]--------- vcs=""><--------[H323]---------- gateway="">

  With regard to incoming calls from gateway ISDN to VCS, there is one important thing to consider. You basically have to methods:

  • You can configure the ISDN gateway to route calls to the auto attendant, then users will be able to recompose the verse numbers of internal endpoint for the auto attendant
  • You can configure the ISDN gateway to use DID (Direct inward dialing), in this case, you create routes to the gateway which maps each ISDN number to an internal endpoint registered to the SCV

  Both methods work fine, however, when using auto attendant, it is very important to implement a scheme of toll-free fraud prevention. Take a look at this thread:

  https://supportforums.Cisco.com/message/3971947#3971947

  Regarding the guide, it is not a simple step by step explaining, but the Administrator's guide provides a good explanation on how to configure the dial plan in the gateway and how to enter the doors of VCS. Check out this guide:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/isdn_gw/admin_guide/isdn_gateway_printable_help_2-2.PDF

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Call SIP with Tandberg C40

  I have a Cisco Tandberg C40 codec and have been making H.323 calls for an organization with no problems.  The organization is now making changes and demanding that I connect to them with their new SIP address.  When I try to connect, it is said immediately that the call could not be connected.  What are the requirements for placing a SIP call with the Tandberg C40?

  Assuming your C40 has the version of the TC6.x software;

  go to network found under Control Panel Services and enable SIP.

  Don't forget of check that SIP is selected as the Protocol to call when calling this company that the default calling Protocol can be set to H.323, SIP and H.320, so if only make you SIP calls, and then upgrade the SIP, but if you do mostly H.323 calls, then put to H.323, and select SIP among the options of appeal when the dial - or even more easily, add this address to the local directory with specified as a SIP call Protocol.

  Just turning on SIP will allow you to make outgoing SIP calls, however, if this company wants to call you, then they can call you only using the public IP address of your system - and they could even not able to do according to their deployment, policies, etc.

  If you want people to be able to call you using a SIP URI as [email protected] / * /, then you need to register your system with a Registrar SIP CUCM, VCS - C, etc. and also have SRV SIP records in place.

  See the guide to the administrator for more information:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC4/administration_guide/profile-c60_codec-C60-c40_administrator_guide_tc40.PDF

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• HELLO, I'M FACED WITH A PROBLEM WITH MY SECURITY QUESTIONS, I FORGOT THE ANSWERS AND NOW I CAN'T RESET, CAN YOU HELP ME?

  Hello

  I AM FACING A PROBLEM WITH MY SECURITY QUESTIONS.

  I FORGOT THE ANSWERS AND NOW I CAN'T RESET, CAN YOU HELP ME?

  Hello

  You will need to contact the Apple Support. (Nobody here can reset your security for you questions: it is a community based on the user, not the Apple Support).

  Contact information for the Apple Support:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Problems with the registration of the guarantee for my Satellite A200

  I tried to sign up for my Satellite A200 laptop computer online and it did not work. I then had to send info and proof of purchase for Toshiba and heard nothing yet.
  Emailed Toshiba and heard nothing yet. Number 117 of what laptop Toshiba receipt for support and services. It is what makes me look to buy a Toshiba.

  What service? What support? All I want to do is register my warranty. Is someone there?

  Hello

  I have 2 different Toshiba notebooks and I could save the guarantee of all my books!
  These two laptops are European model Toshiba and I could register the warranty on Toshiba's European support page!

  If you have any problems with your registration, then contact the ASP in your country and ask for help. If they have not responded until now then contact guys.

  I put t know what's wrong in your case, but my recording of security went well and it was not a problem!

  Then contact the guy and ask for help! It cannot be that difficult.

  Good bye

• desktop icons covered by a blue screen with the white question mark

  original title; Desktop icons

  My desktop icons have a blue circle with a white question mark hide them.  How can I get rid of them?

  My desktop icons have a blue circle with a white question mark hide them.

  These are icons by programs such as Norton 360 backup and are used to indicate certain conditions such as the status of the backup. You must go into the program generating overlays and disable this setting. In the case of Norton that would be settings in the main window and then uncheck the backup status overlays.

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• Record of codec rejected with VCS

  Hello

  I wonder that I had received rejected registration of VCS when the configuration is done correctly for Codecs and through a model of MST. ICMP, DNS and NTP connectivity between venture capital and the Codecs are very good. VCS registration license is 2500 per device.

  the error I get from the TMS is: "#7422 - Gatekeeper registration failure".

  Thank you

  Hi Jens,

  The logging level should be fixed in the coming x7.2.2 I think. I'll check when I am back in the office, but remember that asked me on the release notes for it last week.

  Thank you
  Guy

  Sent by Cisco Support technique iPhone App

• With VCS-E media stream, VCS - C

  Hello

  We intend to implement a VCS infrastructure now I'm not sure wich accepting media between endpoints.

  On the photo, you could see the scenario.

  Endpoint 1 is communicate with the endpoint 2.

  1 medium Wich takes the media stream?

  2 what endpoint 1 communicate (media) with VCS - C and not directly with the two end point?

  2. must a direct connection between two end points?

  Thank you

  Martin

  Hi Martin,

  the media could pass control of VCS and highway always in a solution of course and course usage license.

  endpoint 1 must send to the control of VCS, and then it will be passed to the fast lane and then on internet and internet endpoint not directly.

  Rgds,

  Alok

• Integration of Lync with VCS - key Option mandatory?

  We implement integration with VCS on x7.2 lync.  Using B2BUA with lync 2010.  Everything works internally with lync configuration, we are only having trouble with lync external participants come and we border routers in the mix.  Direct pools are set up under the name of trust.  We have turned on the highway of the tower.  The calls started from inward of Lync.  VCS sees calls says it is connected, but the appeal does not and then falls normal call clearing.

  My thought for the failure, is that the OCS Collaboration option key has not been added.  But I can't tell in the deployment guide, if this key is necessary only if the encryption is in progress.

  The other area that we now have on the border routers is if The Edge server and the firewall that the Edge transport server may move multimedia traffic through can then reconfigure to allow RTP over UDP and RTP over TCP to pass.

  Can you confirm if the key of the SCO is a requirement for Lync which crosses the highway?  And are there other areas which we recommend why calls set entirely outdoors.

  Hi Kim,

  the SCO cooperation improved option key is necessary for this scenario of appeal, stated at pages 13 and 53 in the Lync to X7.2 deployment guide:

  Calls on a Microsoft Edge server require the VCS have installed improved OCS Collaboration option key because this key allows the ICE to be used for media connectivity

  You are also right that you will need to allow RTP UDP traffic to and from your Edge transport server, as the TURN server on VCS Highway currently does not support the RTP over TCP. If this isn't the case, ice connectivity check between the B2BUA and the Lync client and server Edge fails, which in turn causes to disconnect.

  Hope this helps,

  Andreas

• Multi-party sharing with VCS

  Hi, looking for some clarification.

  Can I use the multiparty licensing shared if I have a VCS rather than CUCM for call control?

  The ordering guide indicates that it would cooperate with the VCS.

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/collaboration/PERV...

  page 4 - notes: although Cisco UWL Pro applies only to the Cisco Unified Communications Manager based deployments, SMP can be used with Cisco Unified Communications Manager and Cisco telepresence video Communication Server (VCS).

  The CUCM deployment guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  said only CUCM, not VCS - page 99.

  thoughts?

  Multi-party sharing (SMP) licenses can be used with VCS, the licenses that are managed by the Chief and not CUCM, unlike multi-party staff (PMP).

• No acrobat pro XI come with the registration key?

  The Acrobat Professional XI is provided with a registration key?
  

  Demo version - no

  Retail version - Yes

  Subscription version - no

• Questions of permanent conference MCU 4501

  Hi, I've created several permanent conferences on MCU.

  Permanent Conference sometimes appear as finished. Operators of swear that they have not finished their manually.

  Also, then I put the Conference, by changing its properties and 'permanent' checkbox control, he suddenly starts to all former in conference, even if there is NO preconfigured participant.

  This caused a lot of havoc and disruptions, by calling the BIG BOSSES and so on.

  Any suggestions?

  Software MCU:

  Version	4.3 (2.30)
  Variant	6.18 (2.30)

  Yes, it's what I expected to happen. When you add participants to a permanent conference using TMS, they are added as preconfigured participants, but TMS never deletes them. See bug CSCtr35038 for more information.