Questions of permanent conference MCU 4501

Similar Questions

• [Issue] it is possbile to use MCU 4501 on network 1:1 NAT?

  Hi, I have a very simple question.

  I'll put MCU 4501 model on a private network to connect to public IP codec devices.

  Without devices INCAPACITANTS, Turn, or VCS, it works standalone with H323 and its private IP address is set to 1:1 public IP address.

  In this position, is that it is possible another codec public IP can join the session of MCU 4501?

  In my view, would be well accepted, but given media cannot be accepted because the IP address in the payload would be signaling missmatching.

  No one knows about it? or can I use some free public STUN, ENABLE Server H323 Direct mode? or do it by myself?

  I have no senior engineer and I have to learn about it, everybody ask me when they stuck on the frame.

  This site is the last hope for me, and I'm sorry for imconvient read, it is not my mother tongue.

  Thank you.

  For H.323, IP address of the port media negotiate during the call setup is not using the IP header.

  If your compatible Firewall H.323 AGL, handful of firewall NAT IP and H.323 signal header conversion.

  However for MCU, you can consider the firewall on MCU option if you are looking for private/public double network connection.

• MCU 4501 gatekeeper

  Hello

  Problem - gatekeeper integrated Cisco MCU 4501 cannot connect to a neighbour a keeper:

  

  In a nearby doorman it configured as a neighbour.

  Why would it be?

  In this case, I think you must turn on the logging feature H323/SIP on the MCU-> h323/SIP Journal newspapers, try to make a call and see what requests appear from the endpoint in the log that results.

• function key for secure (HTTPS) management in MCU 4501

  Hello

  Please key to activate the secure HTTPS for MCU 4501 management?

  Thank you

  You must order L-AESCDN-K9 =

  His zero dollars.

  http://www.Cisco.com/c/en/us/products/collateral/conferencing/telepresen...

  AES and HTTPS encryption for post sale MCU 4500 Series upgrade Option

  L AESCDN-K9 =

  Kind regards

  RACLOT

• Conference MCU SIP with VCS registration question

  Hi all

  We have a cluster of MSE 8510 MCU (software version 4.5 (1.72), Build 6.19 (1.72)) with 86 active confeneces. All of them are configured in the same way, to use H.323 and SIP registrar calls control.

  The thing is, I can see all conferences recorded under H323 and some of them just registered as SIP on the VCS cluster (X.8.2.2).

  What is the problem? Why can't all register using SIP?

  See you soon,.

  Petar

  Can you check to see how many conferences are recorded using SIP?

  If it's 50, this seems to be the maximum that can be recorded, see enhancement request CSCum48651.

• MCU 4501 problem! Help, please!

  Hello dear friends, my name is Svetoslav and I want to ask you the following question:

  I have reset the MCU because I did not had the admin name and password. Now there's a banner: "NO ACTIVE PRODUCT code activation required".

  My question is what I should do now, can be a problem to create a conference, because I'm trying to do a conference in menu-> settings-> SIP there is an inscription - > Registred, but when I put ID digital 1 for example and you try to create a conference on recording there failed to save... SIP registrar ID cannot save...

  I'm new at this and please don't laugh a lot may be the problem of the PRODUCT NOT ACTIVE banner? Thank you!

  Hello

  It's hapenning because the MCU has lost its license key. When the password reset, you must back up your license key before doing anything. See this link:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/cisco_telepresence_resetting_password_restoring_factory_settings_kb_13.shtml

  To retrieve your license key, you can use the Cisco licensing page:

  1 - Go to https://tools.cisco.com/SWIFT/LicensingUI/Quickstart
  2 - Go to nonexistent Get > Tandberg license

  3 - Insert the serial number of the MCU and recover the license

  4 - Insert the license on MCU in the "Upgrade" page

  If you are not able to use this page, please contact Cisco GLO by sending an email to [email protected] / * /, so that Cisco will help you recover the licenses.

  I hope this helps.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• support of moz, 'my questions' pinned permanently to add: newtab

  Hello:

  I have 5 pages Web made the fallen add: newtab. They are all well behaved and stay pinned
  However, the Web of the 6th page, doesn't have. This web page is my moz support questions.

  Another of those Web pages which behaves properly, is supported by moz
  https://support.Mozilla.org/en-us/questions/new

  As the 6th pins Web page, I would like to have pinned the website page that displays 'my questions '.
  (I access this page by navigating from the URL above, under my account and selecting my questions in the drop-down list)
  seems simple,
  BUT,
  whenever I drag the URL to newtab, he disappears to use it. I had pinned it. And it always disappears...

  all ideas so it can remain permanently pinned at about: newtab

  Thanks for your help

  Changes manually on the subject: newtab page are stored in the preferences you can find on the about: config page.

  • Browser.newtabpage.pinned stores the Web site you pinned to a tile.
  • Browser.newtabpage.blocked stores the Web site that you've deleted by clicking on the X button in a tile.

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Meter "Remaining time" on page Conferences MCU

  Hello!

  During the planning of a conference at TMS involving a MCU, once the Conference begins the time remaining, such as expressed in the MCU is 15 minutes more than what you have planned.

  Is it a kind of fill that TMS sends to the MCU, a bit like TMS as one endpoint in a special appeal as being occupied for the next 5 minutes?

  This is seen in the following combinations: TMS14.3 (beta) / MCU 4.4 (3.54) & TMS13.0/MCU 4.3 (2.32)

  Thank you!

  Hello

  It is in fact be design. TMS does like that to ensure that MSDS is the tearing down of the Conference; We do not want the MCU to demolish SE for example if there are subtle differences between the MCU and TMS.

  Kind regards

  Kjetil

• MCU 4501 h.323 Gatekeeper problem!

  Hello World cisco Ii am new and I hope that with your help I'll be able to work with VCS and the MCU

  The problem is

  I can't save the h323 for VCS

  h.323 call control: enabled

  h.323 call control address: the address of the vcs

  reg access controller type: standard mcu

  ID h323 compulsory to register: mcuatprobadotbg

  password: empty

  and the other fields are empty

  in the SIP page, everything is OK and it is with status Registered but on the h323 page, the results are:

  h.323 gatekeeper State resolved name to the ip address of the vcs

  Non-registered headquarters

  0 available backup goalie

  Thank you!

  Hello Svetoslav

  What do you see in VCS log?

  Status > newspapers > event log

  BR Oleksandr

• Question about video conference

  Hi guys I had a current situation, my client wants to videoconference thorugh Microsoft Office Communicator call, it should work between the host from one site to another, but we have already set up certain rules in the firewall, and do some testing, I see that video conferencing uses dynamic ports (1024 to 65535) and if we allow for the operation of video conferencing we should delete all rules in the firewall , and is not the point, so if you know a solution to this problem please let me know.

  Concerning

  Hello Luis,.

  No problem, I hope to be supported. You have marked this issue as closed please?

  Thank you!

  Mike

• question of Permanent tablespace

  I have a tablespace with 8 data file now, I want to create a tablespace of large file and load all the data in the data file, as you know big tablespace file have only a data file can I do? If so, the way in which we can do and if I create the wholesale file instead of small file tablespace performs this action on performance impact

  Adeel,
  Both are storage and if you have few objects, you can very easily write a PL small block that can move objects in one tablespace to another. It does not matter that the source tablespace has how many files or target has how many? Segment will be automatically supported by Oracle itself.
  The easiest way would be to do an alter table move command. If the object belongs to a particular schema using Export/Import, you can move the objects.
  Here is a demo for the movement of objects in a tablespace of small file to large file

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With the Partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options
  
  SQL> select * from V$tablespace;
  
         TS# NAME                           INC BIG FLA ENC
  ---------- ------------------------------ --- --- --- ---
           0 SYSTEM                         YES NO  YES
           1 SYSAUX                         YES NO  YES
           2 UNDOTBS1                       YES NO  YES
           4 USERS                          YES NO  YES
           3 TEMP                           NO  NO  YES
           6 EXAMPLE                        YES NO  YES
  
  6 rows selected.
  
  SQL> select name from V$datafile;'
    2
  SQL> select name from V$datafile;
  
  NAME
  --------------------------------------------------------------------------------
  D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
  D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
  D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
  D:\ORACLE\ORADATA\ORCL\USERS01.DBF
  D:\ORACLE\ORADATA\ORCL\EXAMPLE01.DBF
  
  SQL> create bigfile tablespace bigts datafile 'D:\ORACLE\ORADATA\ORCL\bigts.dbf' size
  
  Tablespace created.
  
  SQL> select name from V$datafile;
  
  NAME
  --------------------------------------------------------------------------------
  D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
  D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
  D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
  D:\ORACLE\ORADATA\ORCL\USERS01.DBF
  D:\ORACLE\ORADATA\ORCL\EXAMPLE01.DBF
  D:\ORACLE\ORADATA\ORCL\BIGTS.DBF
  
  6 rows selected.
  
  SQL> select * from V$tablespace;
  
         TS# NAME                           INC BIG FLA ENC
  ---------- ------------------------------ --- --- --- ---
           0 SYSTEM                         YES NO  YES
           1 SYSAUX                         YES NO  YES
           2 UNDOTBS1                       YES NO  YES
           4 USERS                          YES NO  YES
           3 TEMP                           NO  NO  YES
           6 EXAMPLE                        YES NO  YES
           8 BIGTS                          YES YES YES
  
  7 rows selected.
  
  SQL> create table small_table ( a char) tablespace users;
  
  Table created.
  
  SQL> insert into small_table values(1);
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> select * from small_table;
  
  A
  -
  1
  
  SQL> alter table small_table move tablespace bigts;
  
  Table altered.
  
  SQL> select * from small_table;
  
  A
  -
  1
  
  SQL>
  

  I'm not sure there will be an impact on performance. But to be honest, this issue arose in another session of the mine. The answer from me, for now is not for her. But I'm looking for ways to prove it.
  HTH
  Aman...

• By TMS MCU conference number

  Hi all

  We recorded with vcs several MCU Standing Conference, the source of the telephone directory of endpoint is TMS. I am able to discover and manage all the end points of TMS.

  How to display the number of MCU Permanent conference on endpoint through TMS telephone directory? So that users could dial into permanent conference of the directory itself?

  Currently, I have discovered all the endpoints of TMS and its appearance on all telephone directories of endpoint.

  Thanks in advance!

  Bobby

  Hi Bobby

  Create a new source 'manual list type' less manage sources of the telephone directory. Save and add a contact. Type the conference name, add it.

  Now click on the add contact method and write the address you use to dial the Conference. SIP or H323, (E164 alias is H323)

  Save it and go in manage inventories, create a new directory and connect the source you just created. Then click on set on systems and select all the systems you want to see this directory. And save.

  Every endpoint should now be able to compose this conference through the phone book.

  / Magnus

• MCU Rendezvous using Unified CM Conference

  Dear,

  In what scenario we should deploy a MCU as a trunk for the appointment using Unified CM Conference.

  Thank you

  If you use this guide:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/MCU...

  So yes that is right.

  You must first create the permanent conferences or use an auto attendant

• MCU security problem? Automatic creation of conference.

  I encountered a problem which I have not noticed before.

  I was sent a MCU 4501 - v4.5 (1.45) - Note problem also exists in v4.4

  H.323 prefix: 89

  On the MCU I configured the creation of auto attendant and the disabled and access to ad hoc conferences with the digital ID: 8900

  When you make a H.323 call for 8900 (or 898900) you go to the auto attendant as expected.

  When you make a H.323 now call 89 MCU requires a security PIN and creates a new conference, even if no PIN is entered...

  Not exactly what I expect.

  To resolve this, you must create a new auto attendant and give him the digital id prefix: 89;

  When doing a call to 89 you find in the auto attendant and cannot enter an id existing conference.

  Further testing shows the same behavior that if you dial a number with the prefix, 89, e.g. 891234, in this case the MCU create again an ad-hoc conference which is not really what I want.

  How can I solve this problem?

  Rgds, Geert.

  Hi Geert-

  Can you tell us what you have calls of " ""entering the unknown conferences or auto attendants" " " value in the settings > conferences?

  Looks like you have set up to "Create new ad hoc conference", which will give you the results you see when someone made up in the MCU by using the prefix and anything after that is not either the Conference Officer or active auto.

  Try to change to 'Default auto Standard' and see what happens.

• When the upgrade of 4501 MCU - failed validation of the image

  When you transfer the image from 4.4 to my MCU 4501 file I receive validation image failed.  I tried to use Firefox and IE9.  Please adivse which can cause this error.

  Thank you

  Package must be decompressed before being transferred