ConfigFree with dhcp and LAN?

Similar Questions

• NB510-108 problem with wireless and lan controller

  Help, please!
  (answer in German would be nice, ill try English first tho)

  I installed ubuntu 12.04 on my toshiba NB510-108 (PLL72E-00R011GR) and then I was not able to go online via wlan or lan same kable.
  After some effort to install the drivers through ubuntu I have installed windows 7 starter edition back but now windows does not install the ethernet / wireless drivers realtek or atheros network device.
  so I tried to install all the drivers wireless by http://toshiba-asia.com/sg/support/drivers/ but now when I try to run these drivers after loading them down windows 7 cannot install correctly, it says that there is a compatibility issue. I tried to run these drivers in compatibility mode for win xp sp1 and win vista sp1 without success.

  Also, I installed all the drivers for my model of http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE here with some of them have been properly installed and even when I get my system to a point where I find the two network devices work as 'good' in my windows Device Manager, the following problem occurs again:

  I can't find any of my netbook WiFi network (wlan is enabled via fn + f8) no matter what type of router I try to connect. other laptops have about no problem connecting to routers so that can't be the issue. When I click on the windows just below the wlan troubleshooting info it only says no problem could be identified (the system is in German, so please excuse my translation)

  In the information system components and devices of problem the pnp for the ethernetcontroller said pci\ven_1969 & DEV_1090 & SUBSYS... and for the networkcontroller: PCI\VEN_10EC & DEV_8176 & SUBSYS...
  If it is useful. I also wanted to put my dxdiag online file, but this extends the limit to 3000 characters.

  Someone here could help me please? It would be really nice

  Hello

  I m wondering why you have the same problems of connection using WLan and LAN.
  I mean its not really necessary to configure anything to get a connection to the local network works.
  The router must support, and DHCP must be enabled in order to assign the IP address automatically.

  I recommend that you check the TCP/IP settings in your network WLan and LAN connections.
  In TCP/IPv4, you can view the properties. The INVESTIGATION period and all other options should be set to assign automatically. You should also disable/uninstall the TCP/IPv6 and must use TCP/IPv4

  By the way: you have an antivirus and firewall software installed? If so, remember that the two don't affect the WLan/LAN connection.

• WLC5508 problem with dhcp and flexconnect local switching

  Hello
  I have a new WLC 5508 with firmware 8.0.133.0 (suggested one right now) and I'm trying to set up a WLAN with flexconnect and local switching, but when I try to connect a client it is not getting an IP address.

  Here's what I did:
  -put the AP mode flexconnect
  -support vlan in the AP has allowed
  -local switching license and only in wlan
  -spread the vlan from AP to the local gateway
  -put the IP helper on local and pointed the wlc management ip gateway
  -set up a scope for the vlan Server dhcp internal WLC
  -set up a working group with the vlan-wlan association flexconnect

  Here is what I checked:
  -l'AP obtains an IP address in dhcp in the vlan, and a lease for that appear in the DHCP Server internal to the WLC
  -If I put the interface vlan on a switch in DHCP it gets the ip address of the same way
  -If I set the static IP address in the wireless client it ping the local gateway and navigate normally
  -J' tried the deactivation/activation proxy DHCP in the management connected to the WLAN interface, but nothing happened
  -J' tried Central DHCP activation of treatment with no luck

  It seems a dhcpdump on the wireless client client ask for an IP address, but get no response, as if it were the DHCP request is be filtered or diverted somehow.

  All you other ideas?

  DHCP on the controller is not a real dhcp server, see it that way. The management interface is used when defining aid ip and proxy dhcp must be enabled for internal dhcp. In your configuration, dhcp only works for the AP and should not work for any cable customer. You should be able to use the IP helper pointing to your WLC management interface but also make sure that you create an interface on the WLC for the local subnet and assign the interface to a correct address, even if it is not actually using it. Then in the new dynamic interface of this local subnet, you create, make sure that the primary dhcp is the ip address of the controller management. I think it works.

  I would really use a true if possible dhcp server or even put a dhcp scope on the interface of L3 on the production site.

  -Scott

  Please evaluate the useful messages *.

• Extend a network of comments with AEBS and TC set up a connection

  Hi all-

  I was wondering if anyone has had any success with that extends a network invited on two airports or more that are wired together.  I use currently a Time Capsule as my main router (802.11ac), and have it configured with DHCP and NAT like fashion.  It connects via a connection wired to an Airport Extreme Base Station (802.11ac), which is set in Bridge mode and configured with a static IP address to the primary time Capsule.  The time Capsule is configured with a network of comments that is fully functional, and the AEBS extends the primary network using the same SSID and encryption on 2.4 and 5 GHz.  However, when I turn on the AEBS remote networking reviews, I can connect to the AEBS, but cannot obtain an IP address (the computer displays an automatic address assigned).  The SSID and the encryption is the same for both networks of comments.  I tried to use "extend a wireless network" on the AEBS and that will extend the network, but it is extremely slow due to the wireless connection it creates between two access points (I have the TC and wired together AEBS to offer increased coverage, because my house is not very "friendly wifi").

  I would greatly appreciate any help or insight anyone can provide, even if it's to tell me that a cable extension of the network of comments is not possible.

  Thank you

  Mike

  Wired to the guest network feature extension is indeed possible and should be implemented and enabled automatically if you are using "Assistant" Installation from Apple to expand the networks main and guests.

  I had this set up on the 2 airports and sometimes 3 for a few years and not a single hiccup.

  Suggest that you reset the AEBS back to default settings and then use configuration Apple "Wizard" to set up the AEBS again. It automatically adapts the AEBS to expand networks main and guests.  Everything you really need to do is enter a name of device to the AEBS, the wizard takes care of everything else for you.  It is one of the simplest game ups ever.

  Once you have the updated AEBS up and running, you can assign a static unit IP address if you want to, but it should not be necessary.

  After the back if you need some advice on the use of the Apple Setup Assistant to do the work for you.

• Conflict HSPA and Lan Wireless

  Hi, I have a dongle USB HSPA Sierra for internet access and home Asus Wifi network for file sharing.  When you try to connect to the internet with HSPA and Lan active, IE displays an error message from Asus.  Internet is only available with the Asus Lan disabled.  I would like to be able to maintain two connections at the same time.  Is this possible? Thank you very much.

  Hello

  I'm afraid to say that this is not possible. You cannot hold two connections at the same time.

  Hope this information is useful.

• Issues DHCP and FTP

  I have a RIS server running server 2012 R2 with DHCP and filezilla for FTP and a desktop running windows 7. The server can ping the desktop computer, but Office cannot ping the server, but the Office can obtain a DHCP server address. How can I get it to connect to the ftp service?

  Hello Zack,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Separate Wired DHCP and static profiles

  Windows 7 Pro 64-bit

  We have two offices within our campus. Creating a server (DHCP, static) using DHCP. Although building B (DHCP, static) also uses the DHCP protocol, it is necessary for me to assign a static IP address to my PC for various reasons.

  I need to connect my PC to each building. Using another address is not viable because building B (DHCP, static) has DHCP so the PC is assigned to the DHCP rather than another static address.

  Can I create and select separate network for DHCP and LANs static profiles?

  Thanks in advance.

  You can watch NetSwitcher or NetSetMan...

  http://netswitcher.com/

  http://www.NetSetMan.com/

  .. .to create network specific profiles...

• How to Segment LAN/WLAN with TimeCapsule and third party LAN

  Hello

  I have a bit of a delicate situation. I need to speed up my (W) LAN through segmentation and hope that many of you might be able to help here.

  Currently my TimeCapsule connects via its WAN for a FritzBox with DHCP port. 255.255.255.0 subnet / host 192.168.178.1 TC router is turned off (bridge mode). The TC creates a wireless network. The FritzBox connects to the ISP and a lot other customers outside the TimeCapsule.

  The first WLAN TimeCapsule is extended by a second TimeCapsule. A couple AppleTV and expresses the airport are connected in the scope wireless of the 2nd TimeCapsule but far out of reach for first time capsule. Apple network and FritzBox network clients need NOT communicate with each other. It will be even better if they were aware, because there are other AppleTV, printers, servers UPnP, stream movie, etc.

  Thus, the 2nd TimeCapsule acts as a 'bridge' for the internet.

  Now, I want to segment the LAN (W). The main reason is to reduce traffic. The two TimeCapsules to connect with a very low bandwidth, because there are a whole bunch of concrete between the two. Since then, there are a LOT of current traffic, customers and also the internet connection around my TimeCapsules is not responding to most of the time.

  Is it possible to segment the LAN (W) with my first TimeCapsule and create a LAN (W) dedicated?

  Thank you very much for your help!

  I think that you need good QoS or limitation if I read your message.

  Give me real numbers.

  What is the max download and upload becomes your Frtizbox? Many real world real... using ethernet for the Fritzy and anything else using the bandwidth.

  The first link to the TC1 on ethernet should be no problem... but the TC2 wireless link is probably give you mediocre results... and there is very little you can do about it... have you tried or considered using adapters EOP. (homeplug to the United States).

  If you take the link that will help you.

  Segment the network's not going help the problem that I see.

  What model is the Christopher? Is there a QoS limitation or even decent with the limitation of bandwidth?

  You can set IP alias or VLAN on that?

  What model is the TC?

• OfficeJet 6700 DHCP causing problems with airprint and web services

  I find it kind of interesting that this printer does not properly with DHCP enabled by default and more easy to use configuration.  My new printer seems to require to manually set the ip and dns settings before the features of web services or airprint worked correctly.  It was strange because printing from a PC and iMac worked well, it was that only the web services feature (unable to connect to the server) and the airprint from IOS devices failed (printer shows up but just disappeared rather than printing impression actually).  Someone else has seen this and not do anything to solve this problem?

  The problem with this is effectively resolved through static DNS, generally. The reason it is and not with other functions, is that our print servers that connect you with are able to communicate more easily with some DNS configurations on the other.

  For this reason, HP recommends generally defining the DNS for your printer on the parameters of Google DNS: 8.8.8.8 & 8.8.4.4.

  Does that answer your question?

  Have a great day!

  

• ISA550W with multi SSID (each having separate DHCP and VLAN tag)?

  ISA550W can do the following (in order):

  (1) first group interfaces physical and Wi - Fi SSID (s) set

  (2) then assign with DHCP (ip or subnet)

  (3) then add a tag VLAN interfaces and SSID (s) wireless

  (4) repeat 1 to 3 for the remainging and SSID (s) wireless interfaces to create the following diagram:

  

  (1) I believe that could transform these ports in ports of junction. That said, I'll normally in the ports themselves through networking, change them to the Trunk ports and add the appropriate VLAN. Please keep in mind that as a general rule which present you to a Trunk port is another switch. Then you EF the VLAN appropriate to each switch coelio that attach a device such as a workstation. There are some devices that do not support be connected to a Trunk port, like the OnPlus of Cisco device however.

  (2) think SSID that only access ports. Because you could never connect a device that would support Trunking wireless, you can apply only 1 VLAN by SSID wireless-> basic settings.

  (3) because the SSID cannot be interconnection. See #2 above for configuring the VLANS on SSID.

  Sent by Cisco Support technique iPhone App

• Wireless and LAN problem with Thinkpad

  Im having serious problems with my Thinkpad T61p on my wireless and LAN drivers (at least I think it is the drivers, could be something else). This can be a long explanation, but please bear with me.

  Yesterday, after seeing an example on the net, I tried to connect my xbox 360 to my laptop. I thought I'd be able to play on the xbox wireless using the laptop as a gateway to my router. I never had any problems before with logins, and had the wireless on my home network.

  After plugging in an Ethernet cable into the laptop and xbox (following the instructions, I had online), I became "Network connections", (start-> Control Panel-> network connections). I had used a cable to connect your desktop to my laptop before and normally when you go to network connections, the connection between them appears as an icon. This time, has no icon.

  I decided to try and create a connection. At this point my wireless was still working because I was always browsing the net. On the left sidebar, I clicked on "create a new connection". Hit next, and then click the radio button "set up an advanced connection." "Accept inbound connections" option box pressed, the next button. Finally, a link has been created, but when I went to go again my wireless connection dropped. I went back and removed the link to "network connections".

  I opened "Logins" and tried to connect to my home profile. No results. I tried clicking on 'Search' to see were there any other networks available and all I kept getting was: "the wireless radio is turned off. You want to turn on? ". Press 'Yes', landmark of waiting a few seconds, click on 'Search' again, same message. No matter what I did, I couldn't get the wireless to turn on. So I found this thread:

  http://forums.Lenovo.com/LNV/board/message?board.ID=T_Series_Thinkpads&thread.ID=3314&view=by_date_a...

  and decided it was best to update access connections. It came as a default as version 4.42 so I updated to 5.12. Rebooted and tried again. Now the wireless starts up fine, but when I look for my router connections, some networks are located.

  Next to this thread:

  http://forums.Lenovo.com/LNV/board/message?board.ID=Special_Interest_Utilities&thread.ID=524

  I updated my drivers and countless other things without success. I've updated wireless drivers from this page and dial-up connections to:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67853#wireless

  Another strange thing I see is that when I try to 'Create a new connection' 'Network connections', select 'Create a home or small business network', keep the progression through each other, it is to choose connections it is said that both my wireless and LAN are disconnected.

  Wireless that I use is: Intel Wireless WiFi Link 4965AG

  LAN: Intel 82566MM Gigabit Network Connection

  It is not to have problems in Device Manager and that these two are enabled.

  Does anyone have an idea of what is after occurrence and how I could fix this? Any help is greatly appreciated, because I need it for work soon.

  It sets obtained.

  Essentially had to uninstall the network drivers (not enough I know) from Device Manager and reboot. After the wireless and LAN is back!

• Svchost.exe with service Client DHCP [Dhcp] and DNS Client [DNScache] high memory use

  I'm using Windows 2003 standard Server SP 2 found problem svchost.exe run service Client DHCP [DHCP] and DNS Client [DNScache]
  use a lot around 2 GB of memory. Virus scan try and Hijackthis is not found. I try to restart memory return service.

  I have 4 servers and the same symptoms.

  Anyone know why it caused?

  Hello
   
  Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• WLAN and LAN can not work together...

  I have a ProBook 6550 b with LAN, WLAN, WWAN...
  Control software and software packages, all and of course - BIOSupdate regularly!
  And some other user and I found BIG BUG (Limitation in work procedures)...
  In BIOS v F.20 LAN and WLAN cannot work at the same time! Work or WLAN or LAN, but not work WIFI + LAN...! ;((
  When worked tent cabe coonect LAN WLAN! - WLAN is auto turn off... When LAN cable unplugged - WLAN is coming!
  But LAN + WIFI - cannot work at the same time...
  This is case is not in the BONE, not in Utils or driver... I test in slot Win, Unix, and LiveCD...
  And always works as I describe above.

  It's LIMITATIONS of the BIOS! WHY?

  in this key WLAN worked
  

  in what I cable pluged LAN and WLAN is disabled auto-personnes ((())
  

  in this I unplug the LAN cable and WLAN came get IP by DHCP and back...
  

  P.S. in BIOS vF.07 everything works! LAN + WIFI = WORK, but in v F.20 and last v F.21 - NOT WORKED!
  And BIOS v F.20 can't downgrade! ((( Ou Posible? )))
  Make POsible NEW BIOS WORKING? (a few years ago some MSI people! and I completely reasemled BIOS for my old PC..)
  P.S. Can you say which module in 68CDE. BIN necessary to replace the old version?

  For example — 37946B 52 - EC4B - 46AF - AB83 - 76DBBE1E13C4_1_757.ROM this is a LOGO
  and 7BB28B99-61BB - 11 d 5-9A5D - 0090273FC14D_1_408.ROM too LOGO in other BIOS...

  What v F.07 ROM can get him back and everything be WORKED! In the BIOS about 400 Roma modules...

  

  ANY BODY CAN help?

  Hello:

  Take it easy...

  Go into your BIOS, then the menu of device configuration, modify the LAN/WLAN, transition from active to disabled. Save the setting it by hitting the F10 key and again when you go out.

  The two are now on at the same time.

  Paul

• DHCP and static IP at the same time?

  Simple scenario. My internet connection using DHCP and my home network uses a 10.x.x.x (static) addresses. How can I add an address static 10.0.0.x, in addition to the IP address provided by DHCP, if I can use internet and LAN at the same time? Under linux, it's pretty simple: ip addr add 10.0.0.1/24 dev eth0

  You cannot use two IP addresses on a single ethernet interface, if you are using DHCP, you cannot add a static IP, it is technically impossible, in this case you must use two NICs, i.e. two different interfaces. If you connect to the Internet via the DHCP protocol and you have another PC which allows you to build a local network then you you may not change the dynamic address, but can replace the LAN address is dynamic/static. For example, if the PC that has the Internet connection, add another NETWORK card, then connect the second PC with this new NIC card. Now turn on sharing on the first PC Internet connection interface and so the two PC will be able to run the home networking and Internet connectivity. You don't even need to add a static IP address.