Configurable TD & x2APIC Mode Bios under Windows Server R2 2012

Similar Questions

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• update of the bios under windows 8.1

  I am trying to install a new graphics card (gtx750ti) than ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated to 750w power supply. Turn on the pc and no video, the pc is running but nothing on the monitor. Map vid tested on another machine it works fine, they suggested the bios update. I hesitate to update because there is no udate windows 8.1, any suggestions?

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name ROBERT-PC
  System manufacturer HP-Pavilion
  A6652f model FK574AA-A2L system
  System Type x 64-based PC
  SKU FK574AA #A2L system
  Processor Intel (r) Core (TM) 2 Quad CPU Q8200-2.33 GHz, 2333 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
  SMBIOS 2.5 version
  Embedded Controller Version 255.255
  BIOS Legacy Mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17031".
  User name Robert-PC\ROBERT-PC\Robert
  Eastern Daylight Time zone
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  Available physical memory 1.95 GB
  Total virtual memory 8.00 GB
  5.72 GB available virtual memory
  Page file space 4.00 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM Monitor Mode Extensions not
  Hyper-V - second level address translation Extensions No.
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  update of the bios under windows 8.1

• Help stuck in Windows Server R2 2012 kernel mode

  I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.

  I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• Service Update Manager 5.5 crashing on Windows Server R2 2012

  Hello

  I try to get VUM 5.5 1 c working on a Windows Server R2 2012, but without a bit of luck.

  Everything installs correctly, Setup detects 32-bit DSN pointing to our SQL 2008 R2 server and database connectivity works. However, as soon as I am scanning an ESXi host available updates the vSphere VMware Update Manager service fails and a dmp file is created under C:\ProgramData\VMware\VMware update Manager\Logs.

  Just to be sure I installed Crossover on another server in W2K12R2 own, but the end upwards with exactly the same problem. When I install the product on a Windows Server 2008 R2, it works very well.

  According to the VMware 5.5 VUM compatibility matrix works with W2K12R2, but this isn't for me.

  I enclose the vum-vmware-server log file that contains information about the accident of service.

  Best regards

  Rutger

  Hello

  I solved my problem after watching journal line complain about missing path:

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - woosktebvs

  I created this path and copied the existing content

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - bbylallekd

  him (there were new files with the date 09/09/2014)

  VUM scan and decontaminate works for me now without accident service VUM.

  HTH

  Richard

• Hyper-V backup fails VSS in Windows Server R2 2012

  When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:

  I still have to find an answer to this question.

  Log name: Application
  Source: SPP
  Event ID: 16387
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: BitVault
  Description:
  Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot.  More information:.
  The event XML:
  
   
     
      16387
      2
      0
      0 x 80000000000000
      2746
      Application
     
     
   
   
      Microsoft Hyper-V VSS Writer
     
     
      Writer experienced a transient error.  If the backup process is started, the error does not happen. (0x800423F3)
      Unknown error (0x80004005)
   
  

  It's about getting the VSS event log

  A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error.  If the backup process is restarted,
  the error does not recur.
  . The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.

  Operation:
  PrepareForSnapshot event

  Context:
  Execution context: writer
  Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer name: Microsoft Hyper-V VSS Writer
  Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  Command line: C:\Windows\system32\vmms.exe
  Process ID: 3556

  PS C:\Users\Administrator > vssadmin list writers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2013 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
  Status: Stable [1]
  Last error: no error

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
  Status: Stable [1]
  Last error: no error

  Author name: 'Microsoft Hyper-V VSS Writer.
  The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  State: [8] failed
  Last error: error renewable

  Author name: 'Dedup Writer'
  The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
  Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
  Status: Stable [1]
  Last error: no error

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
  Status: Stable [1]
  Last error: no error

  PS C:\Users\Administrator > Get-VMIntegrationService - VMName

  VMName name active PrimaryStatusDescription SecondaryStatusDescription
  ------ ----                    ------- ------------------------ --------------------------
  Home time true synchronization OK
  House real Heartbeat OK OK
  Pair key / value of home Exchange real OK
  House real stop OK
  House VSS True contactless
  House Guest Service Interface fake OK

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Hyper-V Forum.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  See you soon.

• Windows Server Std 2012 R2 domain controller

  Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server R2 2012 building a drop zone

  Hi people, smart

  Advice or you advise how to build Windows Server R2 2012 as a jump of boxes in the demilitarized zone and to connect to the internal networks of the company for external suppliers... all recommendations or help much appreciated.

  M

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  Windows Server forums

  Thank you.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can we use Windows Server Standard 2012 license on Windows Server 2008 R2 to company where some applications do not work?

  Hi support them.

  We intend to buy a new license for Windows Server Standard 2012 that we have been informed of this business license Windows Server 2008 R2 are no longer available. But where some of our applications do not work on the new OS, can we still use the new license if we intend to install Windows Server Enterprise 2008 R2? Appreciate your response.
  Best regards

  Hi Glen,

  The question you have posted is linked to the License Server 2008 and 2012, and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  I googled a lot and could not find anything on Windows 7 SP 3. As far as I know it's only SP 1.

  My AD will work?

  There is only one service pack for Windows 7. W7 SP1 works perfectly.  (There is a service pack 3 for Windows XP. Perhaps it is the mentioned minimum version.)

• ESXi4.0 mit iSCSI unter Windows Server R2 2012

  Hallo Zusammen,

  ICH habe einen Windows Server R2 2012 acquired, den ich mit ob virtuellen iSCSI drive Assembly konfiguriert habe.

  In meiner environment are offers drei Essentials ESXi server. 1 x 5.5 Version und 2 x Version 4.0!

  Die Version 5.5 konnte ich problemlos mit dem iSCSI drive Assembly auf dem Windows Server R2 2012 verbinden.

  Nur unter den Versionen 4.0 independent keine drives. Die über IQN ist available connection. doch're keine Geräte werden in der Übersicht displaying.

  Einzigste der Unterschied, der mir zur Version 5.5 auffiel ist der, dass ich sleeps noch eine weitere Konfigurationsmoglichkeit habe, die mir allows, die Netzwerkkarte correspondingly portals zu fugen über die der iSCSI data traffic laufen soll.

  These Reiter habe ich nicht bei ESXi 4.0. Konnte are daran liegen? Oder habe ich noch eine Einstellung vergessen will?

  Vielen Dank fur eure Hilfe Vorab.

  Little Grüße

  Daniel

  Hi Tim,.

  Vielen Dank fur deine Antwort.

  Sie hat mir village. STIs are die nicht die Lösung war. Sie hat mich der auf die Fahrte gebracht right. Und zwar ich den Namen-DNS of Zielservers im tab had discovered dynamic angegeben. Diesen konnte er nicht auflosen und fand somit kein drive Assembly. Depending on ich die angab IP, fand er auch die body. :-)

  Beste Grüße

  Daniel

• How to install Flash Player on Windows Server R2 2012?

  What should I do to get the Flash Player installed on Windows Server R2 2012?

  Apparently Microsoft is including Flash in Internet Explorer by default

  In server 2012 / IE11 flash is installed by default by turning on the desktop experience.

  http://www.electronerdz.com/2014/10/Adobe-Flash-on-Windows-Server-2012/

  8769f0ea03/how-do-i-install-Flash-player-in-Server-2012?Forum=winserver8gen https://social.technet.Microsoft.com/forums/windowsserver/en-US/4a178833-1fe0-4cec-81B0-BB

  http://arstechnica.com/information-technology/2012/06/Internet-Explorer-10-embedded-Flash-do-not-track-and-stable-standards/

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• How can I configure a static IP address in Windows Server 2008?

  original title: set static IP of Server 2008

  I have a Server 2008 R2 from a CD of demo loaded on a Dell computer.
  When I start my Poweredge 1950 server, I get these messages:
  ' F/W initialization devices 0% '.
  info on the RAID drivers
  "(HA-0 9Bus 2 Dev 14) PERC 5 / i integrated 5.0.1 - 0030"
  "The battery material is missing...". »
  "Source 1 or logical drives on the adapter to the host.
  Logic of 1 drive (s) handled by BIOS
  some information about the remote access configuration utility
  and then he told me that the IP subnet, gateway, are all 0.0.0.0

  I have to hit F1 to continue the boot or F2 to run the Setup utility.

  In the configuration under embedded devices utility, two network cards have TOE activated ability
  I don't seem to be able to assign the NETWORK adapter a static address, and he poses problem when I try to put in place AD DS services
  Server 2003, I read that the TOE function on the NETWORK card is loaded.  I can't disable in the BIOS screen.  I see solutions for
  This manipulation for Server 2003, but nothing for 2008.

  When I try to use installation of AD DS services in advanced mode and get to the screen to select additional options for this domain controller, and I check the DNS of the server, a warning is displayed saying that one or more physical network adapters don't have a static IP address.

  Any suggestions on how to set the static NIC card?

  Thank you

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/