Hyper-V backup fails VSS in Windows Server R2 2012

Similar Questions

• Help stuck in Windows Server R2 2012 kernel mode

  I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.

  I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• Service Update Manager 5.5 crashing on Windows Server R2 2012

  Hello

  I try to get VUM 5.5 1 c working on a Windows Server R2 2012, but without a bit of luck.

  Everything installs correctly, Setup detects 32-bit DSN pointing to our SQL 2008 R2 server and database connectivity works. However, as soon as I am scanning an ESXi host available updates the vSphere VMware Update Manager service fails and a dmp file is created under C:\ProgramData\VMware\VMware update Manager\Logs.

  Just to be sure I installed Crossover on another server in W2K12R2 own, but the end upwards with exactly the same problem. When I install the product on a Windows Server 2008 R2, it works very well.

  According to the VMware 5.5 VUM compatibility matrix works with W2K12R2, but this isn't for me.

  I enclose the vum-vmware-server log file that contains information about the accident of service.

  Best regards

  Rutger

  Hello

  I solved my problem after watching journal line complain about missing path:

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - woosktebvs

  I created this path and copied the existing content

  C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - bbylallekd

  him (there were new files with the date 09/09/2014)

  VUM scan and decontaminate works for me now without accident service VUM.

  HTH

  Richard

• Windows Server Std 2012 R2 domain controller

  Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server R2 2012 building a drop zone

  Hi people, smart

  Advice or you advise how to build Windows Server R2 2012 as a jump of boxes in the demilitarized zone and to connect to the internal networks of the company for external suppliers... all recommendations or help much appreciated.

  M

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  Windows Server forums

  Thank you.

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can we use Windows Server Standard 2012 license on Windows Server 2008 R2 to company where some applications do not work?

  Hi support them.

  We intend to buy a new license for Windows Server Standard 2012 that we have been informed of this business license Windows Server 2008 R2 are no longer available. But where some of our applications do not work on the new OS, can we still use the new license if we intend to install Windows Server Enterprise 2008 R2? Appreciate your response.
  Best regards

  Hi Glen,

  The question you have posted is linked to the License Server 2008 and 2012, and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• Configurable TD & x2APIC Mode Bios under Windows Server R2 2012

  Question about the settings of the Bios for Configurable TD & x2APIC Mode on Windows Server R2 2012.

  CPU 2 each Intel® Xeon® Processor-E5-2680 v4

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  Configurable TDP - Normal or - level 1

  X2apic-on or - off mode

  Its use is for BOINC CPU as PrimeGrid project

  Thank you

  Hello

  bcavnaugh

  What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?

  None of these options will affect the States of frequency or the power of the CPU.

  bcavnaugh

  Configurable TDP - Normal or - level 1

  It is a power and a cool option. Nominal will set fans operate at normal speeds. Level 1 will decrease the speed of the fans.

  bcavnaugh

  X2apic-on or - off mode

  This enables or disables the new method of communication of the CPU. This should only be disabled if the operating system does not support. The processor will work more effectively by enabling this option. It can affect performance, but not in the States MHz or raw turbo.

  Thank you

• My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?

  I googled a lot and could not find anything on Windows 7 SP 3. As far as I know it's only SP 1.

  My AD will work?

  There is only one service pack for Windows 7. W7 SP1 works perfectly.  (There is a service pack 3 for Windows XP. Perhaps it is the mentioned minimum version.)

• ESXi4.0 mit iSCSI unter Windows Server R2 2012

  Hallo Zusammen,

  ICH habe einen Windows Server R2 2012 acquired, den ich mit ob virtuellen iSCSI drive Assembly konfiguriert habe.

  In meiner environment are offers drei Essentials ESXi server. 1 x 5.5 Version und 2 x Version 4.0!

  Die Version 5.5 konnte ich problemlos mit dem iSCSI drive Assembly auf dem Windows Server R2 2012 verbinden.

  Nur unter den Versionen 4.0 independent keine drives. Die über IQN ist available connection. doch're keine Geräte werden in der Übersicht displaying.

  Einzigste der Unterschied, der mir zur Version 5.5 auffiel ist der, dass ich sleeps noch eine weitere Konfigurationsmoglichkeit habe, die mir allows, die Netzwerkkarte correspondingly portals zu fugen über die der iSCSI data traffic laufen soll.

  These Reiter habe ich nicht bei ESXi 4.0. Konnte are daran liegen? Oder habe ich noch eine Einstellung vergessen will?

  Vielen Dank fur eure Hilfe Vorab.

  Little Grüße

  Daniel

  Hi Tim,.

  Vielen Dank fur deine Antwort.

  Sie hat mir village. STIs are die nicht die Lösung war. Sie hat mich der auf die Fahrte gebracht right. Und zwar ich den Namen-DNS of Zielservers im tab had discovered dynamic angegeben. Diesen konnte er nicht auflosen und fand somit kein drive Assembly. Depending on ich die angab IP, fand er auch die body. :-)

  Beste Grüße

  Daniel

• How to install Flash Player on Windows Server R2 2012?

  What should I do to get the Flash Player installed on Windows Server R2 2012?

  Apparently Microsoft is including Flash in Internet Explorer by default

  In server 2012 / IE11 flash is installed by default by turning on the desktop experience.

  http://www.electronerdz.com/2014/10/Adobe-Flash-on-Windows-Server-2012/

  8769f0ea03/how-do-i-install-Flash-player-in-Server-2012?Forum=winserver8gen https://social.technet.Microsoft.com/forums/windowsserver/en-US/4a178833-1fe0-4cec-81B0-BB

  http://arstechnica.com/information-technology/2012/06/Internet-Explorer-10-embedded-Flash-do-not-track-and-stable-standards/

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• Activate the CBT for Hyper-V virtual machines running in Windows Server 2016

  As Windows Server 2016 has built in CBT (tracking changes block) to take incremental backups of Hyper-V virtual machines. I do not know how to enable this on the virtual machines. Help, please!

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• WD Sentinel DX4000 is able to backup of servers running Windows Server 2008 R2?

  Community of Microsoft of Hello, I have the following problem:

  (1) I bought a 4 TB external hard drive to back up the servers running Windows Server 2008 R2

  (2) in order to back up servers in the external hard drive, I used the windows backup tool server

  (3) but the backup does not work and windows tool has shown a message output problem I / O

  (4) seeking to this topic, read xxxx

  (5) then went on the western digital site to check any storage which can back up servers

  (6) located the WD Sentinel DX4000 (http://store.westerndigital.com/store/wdus/en_US/DisplayProductDetailsPage/categoryID.59243300/subCategory.59245600/parid.59193300/catid.59243100)

  (7) but before I buy, I want to assure you that I will be able to connect the WD Sentinel DX4000 on servers and perform the backup or backup windows or Windows Storage Server 2008 R2 Essentials tool that comes in WD own Sentinel DX4000

  (9) also asked the technicians at Microsoft, but he could not answer with certainty.

  So I turn to Microsoft community to see if someone is using the WD Sentinel DX4000 to back up servers with windows 2008 R2 server successfully.

  Already, thank you for your attention.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77