ESXi4.0 mit iSCSI unter Windows Server R2 2012
Hallo Zusammen,
ICH habe einen Windows Server R2 2012 acquired, den ich mit ob virtuellen iSCSI drive Assembly konfiguriert habe.
In meiner environment are offers drei Essentials ESXi server. 1 x 5.5 Version und 2 x Version 4.0!
Die Version 5.5 konnte ich problemlos mit dem iSCSI drive Assembly auf dem Windows Server R2 2012 verbinden.
Nur unter den Versionen 4.0 independent keine drives. Die über IQN ist available connection. doch're keine Geräte werden in der Übersicht displaying.
Einzigste der Unterschied, der mir zur Version 5.5 auffiel ist der, dass ich sleeps noch eine weitere Konfigurationsmoglichkeit habe, die mir allows, die Netzwerkkarte correspondingly portals zu fugen über die der iSCSI data traffic laufen soll.
These Reiter habe ich nicht bei ESXi 4.0. Konnte are daran liegen? Oder habe ich noch eine Einstellung vergessen will?
Vielen Dank fur eure Hilfe Vorab.
Little Grüße
Daniel
Hi Tim,.
Vielen Dank fur deine Antwort.
Sie hat mir village. STIs are die nicht die Lösung war. Sie hat mich der auf die Fahrte gebracht right. Und zwar ich den Namen-DNS of Zielservers im tab had discovered dynamic angegeben. Diesen konnte er nicht auflosen und fand somit kein drive Assembly. Depending on ich die angab IP, fand er auch die body. :-)
Beste Grüße
Daniel
Tags: VMware
Similar Questions
-
Hyper-V backup fails VSS in Windows Server R2 2012
When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:
I still have to find an answer to this question.
Log name: Application
Source: SPP
Event ID: 16387
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: BitVault
Description:
Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot. More information:.
The event XML:
16387
2
0
0 x 80000000000000
2746
Application
Microsoft Hyper-V VSS Writer
Writer experienced a transient error. If the backup process is started, the error does not happen. (0x800423F3)
Unknown error (0x80004005)
It's about getting the VSS event log
A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error. If the backup process is restarted,
the error does not recur.
. The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.Operation:
PrepareForSnapshot eventContext:
Execution context: writer
Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer name: Microsoft Hyper-V VSS Writer
Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
Command line: C:\Windows\system32\vmms.exe
Process ID: 3556PS C:\Users\Administrator > vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) copyright 2001-2013 Microsoft Corp.Author name: 'Task Scheduler Writer'
The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
Status: Stable [1]
Last error: no errorWriter name: 'recorder VSS metadata store.
The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
Status: Stable [1]
Last error: no errorWriter name: 'Performance Counters writer. "
The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
Status: Stable [1]
Last error: no errorThe writer's name: "System Writer".
The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
Status: Stable [1]
Last error: no errorAuthor name: 'ASR Writer.
The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
Status: Stable [1]
Last error: no errorAuthor name: 'Microsoft Hyper-V VSS Writer.
The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
State: [8] failed
Last error: error renewableAuthor name: 'Dedup Writer'
The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
Status: Stable [1]
Last error: no errorAuthor name: 'Shadow Copy optimization Writer. "
The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
Status: Stable [1]
Last error: no errorName of the author: "COM + REGDB Writer".
The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
Status: Stable [1]
Last error: no errorAuthor name: 'Registry Writer'
The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
Status: Stable [1]
Last error: no errorAuthor name: 'WMI Writer'
The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
Status: Stable [1]
Last error: no errorPS C:\Users\Administrator > Get-VMIntegrationService - VMName
VMName name active PrimaryStatusDescription SecondaryStatusDescription
------ ---- ------- ------------------------ --------------------------
Home time true synchronization OK
House real Heartbeat OK OK
Pair key / value of home Exchange real OK
House real stop OK
House VSS True contactless
House Guest Service Interface fake OKHello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet Hyper-V Forum.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv
See you soon.
-
Windows Server Std 2012 R2 domain controller
Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?
Thanks in advance.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Help stuck in Windows Server R2 2012 kernel mode
I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.
I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
Windows Server R2 2012 building a drop zone
Hi people, smart
Advice or you advise how to build Windows Server R2 2012 as a jump of boxes in the demilitarized zone and to connect to the internal networks of the company for external suppliers... all recommendations or help much appreciated.
M
Hello
Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:
Thank you.
-
We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Hi support them.
We intend to buy a new license for Windows Server Standard 2012 that we have been informed of this business license Windows Server 2008 R2 are no longer available. But where some of our applications do not work on the new OS, can we still use the new license if we intend to install Windows Server Enterprise 2008 R2? Appreciate your response.Best regardsHi Glen,
The question you have posted is linked to the License Server 2008 and 2012, and it would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads
Hope it will be useful.
-
Configurable TD &; x2APIC Mode Bios under Windows Server R2 2012
Question about the settings of the Bios for Configurable TD & x2APIC Mode on Windows Server R2 2012.
CPU 2 each Intel® Xeon® Processor-E5-2680 v4
What are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?
Configurable TDP - Normal or - level 1
X2apic-on or - off mode
Its use is for BOINC CPU as PrimeGrid project
Thank you
Hello
bcavnaughWhat are the best settings for the CPU plus top MHz high power Turbo is for the two parameters below?None of these options will affect the States of frequency or the power of the CPU.
bcavnaughConfigurable TDP - Normal or - level 1It is a power and a cool option. Nominal will set fans operate at normal speeds. Level 1 will decrease the speed of the fans.
bcavnaughX2apic-on or - off modeThis enables or disables the new method of communication of the CPU. This should only be disabled if the operating system does not support. The processor will work more effectively by enabling this option. It can affect performance, but not in the States MHz or raw turbo.
Thank you
-
My dealer told me that if I have an ad server using Windows Server R2 2012, specifications minimum PC user must be Windows 7 SP 3?
I googled a lot and could not find anything on Windows 7 SP 3. As far as I know it's only SP 1.
My AD will work?
There is only one service pack for Windows 7. W7 SP1 works perfectly. (There is a service pack 3 for Windows XP. Perhaps it is the mentioned minimum version.)
-
Service Update Manager 5.5 crashing on Windows Server R2 2012
Hello
I try to get VUM 5.5 1 c working on a Windows Server R2 2012, but without a bit of luck.
Everything installs correctly, Setup detects 32-bit DSN pointing to our SQL 2008 R2 server and database connectivity works. However, as soon as I am scanning an ESXi host available updates the vSphere VMware Update Manager service fails and a dmp file is created under C:\ProgramData\VMware\VMware update Manager\Logs.
Just to be sure I installed Crossover on another server in W2K12R2 own, but the end upwards with exactly the same problem. When I install the product on a Windows Server 2008 R2, it works very well.
According to the VMware 5.5 VUM compatibility matrix works with W2K12R2, but this isn't for me.
I enclose the vum-vmware-server log file that contains information about the accident of service.
Best regards
Rutger
Hello
I solved my problem after watching journal line complain about missing path:
C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - woosktebvs
I created this path and copied the existing content
C:\ProgramData\VMware\VMware update Manager\Data\host_upgrade_packages\esxi-up to date - bbylallekd
him (there were new files with the date 09/09/2014)
VUM scan and decontaminate works for me now without accident service VUM.
HTH
Richard
-
How to install Flash Player on Windows Server R2 2012?
What should I do to get the Flash Player installed on Windows Server R2 2012?
Apparently Microsoft is including Flash in Internet Explorer by default
In server 2012 / IE11 flash is installed by default by turning on the desktop experience.
http://www.electronerdz.com/2014/10/Adobe-Flash-on-Windows-Server-2012/
-
Adobe Reader DC contains errors and crashes with Windows Server R2 2012
We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:
- This version is a little awkward and crashes.
- A lot of pop up boxes that appears whenever I open a document.
- Whenever I open a document it is a box pop up welcome
- It is a little slow to respond between clicks
- If I click on options like file. The application hangs and then crashes. (see crash message attachment)
Any help to solve this problem would be useful.
Thank you
Questions for users confronted with this question:
1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.
2. ensure that the following directories exist on your machine. If this isn't the case, please create them:
C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro
C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr
Replace USERNAME with your username.
Is - do this 1 or 2 to solve this problem?
-
TS140 RAID 100 controller listed do not as a controller of storage in Windows Server R2 2012
Establishing a new TS140. Installed SSD as drive. Installed Windows Server 2012 R2 Essentials Software, no UEFI strives. As a second drive, installed a 500 GB HARD drive. Everything is OK.
Installed 2-4 TB HDDs. Windows can see the disks. Rebooted and went to set up the RAID volume. Made sure the CSM has been activated. To restart the server, has encountered an error. I removed the RAID volume and reset to SATA RAID not.
I then looked in Windows features and I saw that the only listed storage controller is the variety of Windows one spaces. I think that's the problem.
Once installed Win2K, how can I add the RAID 100 as a storage controller?
Thank you
John
Problem solved. I'd missed initially 'Load the Driver' stage when selecting an installation location, after selecting the l; apartment, I clicked on "Load driver" ther, but which did not load the driver. Reinstalled Windows successfully.
-
Hello team HP,
We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.
But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.
Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?
If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?
Help us to this problem as soon as POSSIBLE and its very high priority for us.
Kind regards
Gaudin. B
Hello
CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.
Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD
Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141
Thank you
-
Automate the update of Windows Server R2 2012
Hi all
I am currently looking for a method to update automatically to our servers. Rather than use Windows update to install and reboot servers, I want to be able to automate the download and install the updates, but to impose when the server reboots automatically. I know that WSUS automatically installs updates but I don't think there is a way to control when the server should restart. Also apart from that, I know that servers come online without having to login to them manually. I think that the only way to go about this is with a script.
Any help or insight is most appreciated. Thank you.
It is a forum for specific consumers.
You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home
You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Maybe you are looking for
-
Hexadecimal string to numeric value
Hello I have a really (I think) a fundamental problem of trying to convert between a hexadecimal number to a 'digital constant' value so I can calculate certain things. The situation is: I'm able, a VISA series, a distance of an ultrasonic sensor rea
-
I get the following message Also get the red shield with X saying if off automatic updates. Tried fixing it by going to control panel, but it does not allow me to change the settings [Error number: 0 x 80070424] The website has encountered a problem
-
I would be grateful for the help, I can't get Sony, being able to print from the phone
-
How to change ACS password expiry email messages?
Hello Does anyone know how to change e-mail messages that can be set to be sent to notify users of password expiration 5.7 ACS? I want to change the wording of the message, but it doesn't seem to be a center to do. Is there a way to do it from
-
Can build two ASA balancing as active/active mode?
Hi, professionals I wonder if two ASA able to set up a balancing as active/active mode, balance the traffic? Thanks in advance, Yang