Configuration level in SOA 11 g, need help.

Similar Questions

• Security at the level of the ADF Page - need help

  Hello

  Currently, I am looking to secure my adf application. The taskflow Unbounded (adfc-config. XML) in my application is as follows

  

  Application is shared with several customers. The homepage of a customer's A.jsp and other D.jsp. The reason is that there are several pages are shared by them. for example. B.JSP and C.jsp

  The distinication between two clients's context path. Context path is different to one another. Context for client 1 path is ctx_path1 and for client 2 is ctx_path2.

  Since all the page mapping is adfc-config.xml file, when client 2 is being access to the application context path ctx_path2 help and the D.jsp homepage, after if there change the url to A.jsp (ctx_path2/A.jsp), it could reach A.jsp and then B.jsp so on. Client 2 is then able to access the application customer1 and vice versa by changing the URL.

  Note: There is correspondence of the page between either B.jsp and F.jsp C.jsp to E.jsp or C.jsp to G.jsp E.jsp to B.jsp so on.

  
  Now, I want to add security to the level of the page Let's say A.jsp, when a customer access request 2 using context path (say ctx_path2)... / ctx_path2/D.jsp, although if he change the URL in... / ctx_path2/A.jsp, the safety of the adf must block access to A.jsp (client application 1.)

  
  Please let me know the solution for the problem above mentioned above.

  Version Note: ADF - 11.1.1.6.0

  Thank you

  ASIS

  If you enable ADF security and have Customer1 and Customer2 associated with different Application roles, you can set a level for each page role permission, provided that each page has a definition of page each. This will automatically solve your problem of "access if URL.

  In addition, when you need to show/hide the navigation links based on the permissions of the user, you can use the visible property:

   

• Debugging - need help with configuration

  I also posted this in advanced by accident...

  I need help to my local development for CFBuilder debugging machine configuration. Developing CF applications is configured correctly, but I have problems configuring settings for debugging for CFBuilder/Eclipse. CFBuilder is installed and connected to RDS, and CF administrator is configured to debug level line. I'm running Windows 7 x 64 with ColdFusion 9 (using IIS).

  All my projects are in my "C:\Dev" folder, and each project contains a folder "www", which is the root of the web project. So, I have my projects organized like this:

  C:\Dev

  TestSite

  design

  docs

  www <-web root folder

  , I have created a ColdFusion project and he mapped directly to the folder root 'www '. In IIS, the web root folder is mapped via a virtual directory under the web site default and is accessible from "http://127.0.0.1/testsite"" "

  I have configured my RDS server that works correctly, so I can see the databases on the server. Nice. I also set up a server in the list of servers in the perspective of coldfusion and imported directly from my RDS server settings. It has the same name as my RDS Server, which is 'Server RDS Local.' I also added a URL prefix for "testsite" which is mapped to the local path: (C:\Dev\TestSite\www) and "http://127.0.0.1 \testsite. And finally, in Debug maps (preferences window), I said 'Server RDS Local.'

  Everything seems to be installed, but I can not debug. Here's what happens:

  Of the ColdFusion perspective, I click with the right button on index.cfm and select "Debug-> ColdFusion Application" the first time I do it, it switches on the ColdFusion debugging Perspective and loads of " " http://Homepage/ 'and then nothing seems to work. On the debugging tab, it shows me that he has created a new launch for my project as follows:

  TestSite

  Local RDS Server

  Model of ColdFusion

  I see my breakpoint in my breakpoints tab. But I can't seem to get any further. I can't find a way to run at my breakpoint. The home page for the current debugging session is "http://homepage/" which is something I don't understand. How CFBuilder go to the correct home page for the debug session? Maybe that's the key of.

  Hello

  Please right click on the project, and you will see an option "set the URL prefix. Allows to set the URL of your project.

  Thank you!

  Bhakti

• HP C4580 not scan to PC. I need help to configure my Netgear router please :)

  Hello

  I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

  I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

  Here's the answer:

  "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

  Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

  Thanks in advance for any help!

  Sorry, I don't need help after all

  It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

  My "all-in-one" now does everything it is supposed to do

• Need help configuration IOS IPsec to enable communication between the VPN client

  Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".

  The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.

  Thanks in advance...

  Hello

  Try this: -.

  local pool IP 192.168.1.1 ippool 192.168.1.5

  access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit 10.10.10.0 0.0.0.255

  < lan="" behind="" the="">

  ISAKMP crypto client configuration group vpnclient

  key cisco123

  ACL 1< binding="" the="" acl="">

  !

  --------Done-------------

  If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had

  Assuming that the NAT of your router is

  overload of IP nat inside source list 111 interface FastEthernet1/0

  !

  ! - The access list is used to specify which traffic

  ! - must be translated to the outside Internet.

  access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  Above two statements are exempt from nat traffic.

  access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">

  I would like to know if it worked for you.

  Concerning

  M

• Need help - &#62; configuration of windows 2008 Server

  Hi I need help. I have the subject of a project that I do for my final school certificate and I need enything on windows 2008 Server Configuration / Costomizing. I hope you can help me

  Thank you!

  OB

  Server questions should be asked on the Technet site

  http://social.technet.Microsoft.com/forums/en-us/home

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• already the ip configured VCnter end, and now I need to reserve the Ip at the level of the vRA

  already the ip configured VCnter end, and now I need to reserve the Ip at the level of the vRA

  check the status of ping if already Ip's ping then
  go to Db server and select the dabase and run the new query

  Select * from StaticIPv4Address where IPv4Address = "

  Update StaticIPv4Address Set StaticIPv4AddressState = '0' where IPv4Address = "

  check the address staticIPv4 if 1 = unassigned

  Enter the IP address in the above script, and it will allocate

• Need help finding my code of the original key.  Have the update level but need the original.  Can you help me?

  Need help finding my code of the original key.  Have the update level but need the original.

  How did you come to lose?

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• Need help with implementing DLL based on LabVIEW below call Lib

  Here is the list of C functions in the doc that I have, but I don't get the right result.

  I need help to understand how these features and how to configure it in LabVIEW

  Parameters

  voltType
  [in] Specifies a voltage detector to get the value of. There may be flags
  VCORE (1<>
  V25 (1<>
  V33 (1<>
  V50 (1<>
  V120 (1<>
  VSB (1<>
  VBAT (1<>
  VN50 (1<>
  VN120 (1<>
  ATV (1<>
  retval
  [out] Points to a variable in which this function returns the voltage in volts.
  Typesupport
  [out]
  If the value is specified as a (non-NULL) pointer to a variable, it will return the types of sensors available in indicators at the level of the ILO-ORed
  Return value
  TRUE (1) indicates a success; FALSE (0) indicates a failure.
  Remarks
  Call the function first with a typesupport non-NULL of the sensors available fan and a subsequent call to get the required voltage.

  Thanks to all...!

  I solved this problem.

  There was a problem in the configuration of the VoltType. We have a cluster of bits.

  Here is the screenshot.

  

• How do we install a page active desktop, my windows vista, my xp and windows 7, as all three, I need help please

  I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

  I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

  Hey jennyanderson99

  as you ask specifically about active desktop, here's what it is, or in your case what she was before vista released

  Active Desktop is a feature of Microsoft Internet Explorer 4.0 Windows Desktop Update that allows the user to add optional contentHTML on the Office, as well as a few other features. This feature was designed to be installed on theWindows 95 operating system then in force. It was also included inWindows 98 and later Windows operating systems up toWindows Vista, where the feature wasdiscontinued. This corresponds to the version ofInternet Explorer 4.0 to 6.x, but not Internet Explorer 7.

  HTML users can add in place of the ordinary wallpaper as independent resizable desktop items. Items available online can be regularly updated and synchronized so that users can stay up-to-date without visiting the site in their browser.

  Active Desktop works as the technology of desktop widget that allows users to add customized their desktop information.

  Here is information for active desktop for xp

  http://www.ehow.com/how_6366085_make-XP-Active-Desktop.html

  information from wikipedia about active desktop are less than

  http://en.Wikipedia.org/wiki/Active_Desktop

  The introduction of the Active Desktop brand attempt by Microsoft to take advantage of the ephemeral trendtechnology push led by PointCast. Active Desktop has imposed a number of "channels" ofdesktop computers that provided information updated continuously, such as headlines and stock quotes, without the user to open aWeb browser of the user.

  Active Desktop debuted during the publication of 1997 of Internet Explorer 4.0 for Windows 95 and Windows NT 4.0, install it as a feature of theWindows Desktop Update offered to users during the upgrade option. The Windows desktop update is commonly referred to as (bad) Active Desktop itself, but it is actually a whole Windows shell to level v4.0 to v4.71, or v4.72, with many changes in the Windows interface, resulting in a level look and features almost indistinguishable from the Windows 98, then again to-be-released. Features include the ability to allow uppercase filenames (the old v4.0 Desktop would forcibly filenames in title case uppercase), the dynamic tracking file selection click configurable, customizable by HTML, QuickLaunch folder display settings mini buttons on the taskbar next to the Start button, improved to Start Menu drag and drop re-organization of the elements and menus contextual click right to rename point etc. With the update, Windows Explorer now has an address bar in Internet addresses that can be entered and driven seamlessly.

  Active Desktop was widely regarded as a failure, with one of the main problems being its use high system and reduction of the stability of the system resources. Although not used^{[citation needed]}, the availability of Active Desktop was decisive for the legal argument Microsoft in antitrust case of United States v. Microsoft , that Internet Explorer has a feature of Windows, not a separate product.

  Later use

  Windows Vista has replaced the Active Desktop withWindows Sidebar (now called Gadgets Windows Desktop fromWindows 7), which also allows the components to add to the desktop. Windows XP is the newest operating system from Microsoft to support Active Desktop. It seems that the 64 bit version of Windows XP supports is no longer Active Desktop. It provides always the option to display Web pages and channels built with MicrosoftChannel Definition Format (CDF) on the desktop.

  Display HTML features are now mainly used for creating wallpapers originals and adding the fields of desktop search. For example, a user can copy the following code to display the search box of Wikipedia on the desktop:

  Walter, the time zone traveller

• Need help to set up voice VLAN in SG300

  Hello

  I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

  interface gi25

  switchport mode access

  switchport access vlan 101

  switchport voice vlan 100

  Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

  The current configuration under Gi15 interface is as follows:

  interface gigabitethernet15

  activate the storm control

  broadcast storm control level kbit/s 10

  Storm-control include multicast

  port security throw trap 60

  maximum port security by 10 points

  port security mode max-addresses

  spanning tree portfast

  LLDP-med disable

  switchport mode access

  switchport access vlan 101

  ! next order is internal

  macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

  Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

  When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

  The $voice_vlan macro setting is not configurable by the user

  It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.
  

  I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

  switchport trunk vlan 101 native

  switchport mode trunk

  switchport voice vlan 100

  Cisco-switch macro description

  This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

  VLAN ID - VPT DSCP Source MAC address Interface

  1                    5          46       default           ----                    ---

  * 100 CDP e0:5f:b9:xx:yy:zz gi28

  Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

  Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

  Hello telecastle,

  The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

  (config) #voice vlan id 100

  * This will create the vlan 100

  VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

  State of vlan (config) enabled automatic #voice

  (config) #interface rank fa1-24

  (config-if-range) #switchport trunk vlan 101 native

  trunk (config-if-range) #switchport allowed vlan add 100

  * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

  CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

  CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

  Let me know if this helps.

  Cisco Small Business Support Center

  Randy Manthey

  CCNA, CCNA - security