Configuration of certificate without FlexVPN for AnyConnect

Similar Questions

• VPN connects without asking for a password!

  Hello

  I just moved my setup lab work VPN to my main router, everything works planned, except that when I try to connect with VPN, it connect directly WITHOUT asking for a Login or password, I don't get the context menu!

  Two routers an equal (C1841) HW and SW (system image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin")

  Here below the full working script:

  (I know I have to clean, I'll do it next week)

  Best regards

  Didier

  ROUTER1841 #sh run

  Building configuration...

  Current configuration: 8440 bytes

  !

  ! Last configuration change at 10:27:45 gmt + 1 Sunday 30 January, 2011 by admin

  ! NVRAM config update at 00:29:33 gmt + 1 Sunday 30 January, 2011 by admin

  !

  version 12.4

  horodateurs service debug datetime localtime

  Log service timestamps datetime msec

  encryption password service

  !

  hostname ROUTER1841

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096 notifications

  enable password 7 05080F1C2243

  !

  AAA new-model

  !

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  AAA - the id of the joint session

  clock time zone gmt + 1 1 schedule

  clock daylight saving time gmt + 2 recurring last Sun Mar 02:00 last Sun Oct 03:00

  dot11 syslog

  no ip source route

  !

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.10.1

  DHCP excluded-address IP 192.168.20.1

  DHCP excluded-address IP 192.168.30.1

  DHCP excluded-address IP 192.168.100.1

  IP dhcp excluded-address 192.168.1.250 192.168.1.254

  !

  IP dhcp pool vlan10

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.1

  lease 5

  !

  IP dhcp pool vlan20

  import all

  network 192.168.20.0 255.255.255.0

  router by default - 192.168.20.1

  lease 5

  !

  IP dhcp pool vlan30

  import all

  network 192.168.30.0 255.255.255.0

  default router 192.168.30.1

  !

  IP TEST dhcp pool

  the host 192.168.100.20 255.255.255.0

  0100.2241.353f.5e client identifier

  !

  internal IP dhcp pool

  network 192.168.100.0 255.255.255.0

  Server DNS 192.168.100.1

  default router 192.168.100.1

  !

  IP dhcp pool vlan1

  network 192.168.1.0 255.255.255.0

  Server DNS 8.8.8.8

  default router 192.168.1.1

  lease 5

  !

  dhcp MAC IP pool

  the host 192.168.10.50 255.255.255.0

  0100.2312.1c0a.39 client identifier

  !

  IP PRINTER dhcp pool

  the host 192.168.10.20 255.255.255.0

  0100.242b.4d0c.5a client identifier

  !

  MLGW dhcp IP pool

  the host 192.168.10.10 255.255.255.0

  address material 0004.f301.58b3

  !

  pool of dhcp IP pc-vero

  the host 192.168.10.68 255.255.255.0

  0100.1d92.5982.24 client identifier

  !

  IP dhcp pool vlan245

  import all

  network 192.168.245.0 255.255.255.0

  router by default - 192.168.245.1

  !

  dhcp VPN_ROUTER IP pool

  0100.0f23.604d.a0 client identifier

  !

  dhcp QNAP_NAS IP pool

  the host 192.168.10.100 255.255.255.0

  0100.089b.ad17.8f client identifier

  name of the client QNAP_NAS

  !

  IP cef

  no ip bootp Server

  IP domain name dri

  host IP SW12 192.168.1.252

  host IP SW24 192.168.1.251

  IP host tftp 192.168.10.50

  host IP of Router_A 192.168.10.5

  host IP of Router_B 10.0.1.1

  IP ddns update DynDNS method

  HTTP

  Add http://dri66: [email protected] / * *//nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=[email protected] / * //nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=

  maximum interval 1 0 0 0

  minimum interval 1 0 0 0

  !

  NTP 66.27.60.10 Server

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Flow-Sampler-map mysampler1

  Random mode one - out of 100

  !

  Crypto pki trustpoint TP-self-signed-2996752687

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2996752687

  revocation checking no

  rsakeypair TP-self-signed-2996752687

  !

  !

  TP-self-signed-2996752687 crypto pki certificate chain

  certificate self-signed 01

  30820246 308201AF A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 32393936 37353236 6174652D 3837301E 170 3130 31313330 31393036

  34355A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 39393637 65642D

  35323638 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100E1D0 6D1EDC8A D7C6D4C4 FADC711E FB52B082 4F81BF1E 9B5BD3A0 DDB505E2

  6E69B426 47168821 AA60E9ED C4B3F95B C0830935 F6B395BA EB6CFC82 E27B75EC

  9 258765 4690634 628EBF91 CBF13884 F5DA31EF 44C3D330 C9FF0D27 E45DE343

  5F5EE55B A4B53946 56429179 15687FFE 63A7C25C 259FA18E DB20F8C5 5F3065E1

  02570203 010001 HAS 3 1 130101 FF040530 030101FF 30190603 0F060355 6E306C30

  551 1104 12301082 0E524F55 54455231 3834312E 64726930 1 230418 1F060355

  30168014 6144EDD8 070B697B 38FC3D5E A2501396 D885B4D5 551D0E04 0603 301D

  16041461 44EDD807 0B697B38 FC3D5EA2 501396 85B4D530 D 8 0D06092A 864886F7

  010104 05000381 810099FA B5F4D0B0 D51DA525 1AB96481 1D1732B3 CD080412 0D

  2255E8DB 84823CF5 ED9C077C 1FADFF17 A9A1D4BA B69B39B0 47A9CBA7 4A97C1E5

  6A1B6FBD 511BA8AD 3E716EC3 654980DA F16A3B47 CE7BC6A4 1902600E CB1373E2

  863C 6352 9074B62A 15E74894 BEDEDC14 D85753AF AD2EF852 6A4B2588 9759CABD

  42AD878C 58504629 BE48

  quit smoking

  !

  !

  VTP version 2

  username Admin privilege 15 secret 5 $1$ gAFQ$ 2ecAHSYEU9g7b6WYuTY9G.

  username cisco password 7 02050D 480809

  Archives

  The config log

  hidekeys

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  DNS 8.8.8.8

  domain cisco.com

  pool VPNpool

  ACL 150

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  !

  card crypto client clienmap of authentication list userauthen

  !

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  !

  !

  property intellectual ssh time 60

  property intellectual ssh authentication-2 retries

  IP port ssh 8096 Rotary 1

  property intellectual ssh version 2

  !

  !

  !

  interface Loopback0

  IP 192.66.66.66 255.255.255.0

  !

  interface FastEthernet0/0

  DMZ description

  IP ddns update hostname mlgw.dyndns.info

  IP ddns update DynDNS

  DHCP IP address

  no ip unreachable

  no ip proxy-arp

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface FastEthernet0/0,241

  Description VLAN 241

  encapsulation dot1Q 241

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/0.245

  encapsulation dot1Q 245

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/1

  Description INTERNAL ETH - LAN$

  IP 192.168.100.1 address 255.255.255.0

  no ip proxy-arp

  IP nat inside

  IP virtual-reassembly

  Shutdown

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0/0

  switchport access vlan 10

  spanning tree portfast

  !

  interface FastEthernet0/0/1

  switchport access vlan 245

  spanning tree portfast

  !

  interface FastEthernet0/0/2

  switchport access vlan 30

  spanning tree portfast

  !

  interface FastEthernet0/0/3

  switchport mode trunk

  !

  interface Vlan1

  IP address 192.168.1.250 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan10

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan20

  address 192.168.20.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  Vlan30 interface

  192.168.30.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan245

  IP 192.168.245.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  IP pool local 172.16.0.1 VPNpool 172.16.0.200

  IP forward-Protocol ND

  no ip address of the http server

  local IP http authentication

  IP http secure server

  !

  IP flow-cache timeout idle 130

  IP flow-cache timeout active 20

  cache IP flow-aggregation prefix

  cache timeout idle 400

  active cache expiration time 25

  !

  !

  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  access-list 180 deny ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 180 permit ip 192.168.10.0 0.0.0.255 any

  not run cdp

  !

  !

  !

  route NAT allowed 10 map

  corresponds to the IP 180

  !

  !

  !

  control plan

  !

  Line con 0

  Speed 115200

  line to 0

  line vty 0 4

  access-class 5

  privilege level 15

  Rotary 1

  transport input telnet ssh

  line vty 5 15

  access-class 5

  Rotary 1

  !

  Scheduler allocate 20000 1000

  end

  Didier,

  You can configure the router to accept the connection of customer VPN without XAUTH (extended authentication), so by this authenticating just VPN client itself, not the user.

  But, depending on the configuration, you will be prompted for user/pass.

  Are you saying the client connects very well and the tunnel is fully established without this prompt?

  Federico.

• HP20002D19WM came with no software (cyberlink) key and certificates of authenticity for windows

  I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it

  This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;

  • OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WebVPN software package for AnyConnect

  I'm trying to set up my router 2821 AnyConnect following the link below:

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080af314a.shtml

  I came to the next line but I can't find the package of webvpn anywhere on Cisco's Web site.  I don't have a windows machine available to me so I can not use CCP, as this guide advises.  I can only configure this via command line.

  webvpn install svc flash:/webvpn/svc_1.pkg sequence 1

  Can someone tell where I can find this webvpn firmware, so I can continue with the configuration?  Or can someone give me another set of instructions to get this set up?

  Thank you!

  Hello

  Jeffrey Simon napisano:
  Thanks for the post.  I just checked out your link.  So if Iam to understand this correctly, if I am going to be having Mac and PC computers connecting via AnyConnect I would have to install the package mentioned above in addtion to "Web deployment package for Mac OS X "Intel" platforms" correct?
  

  Yes, that's correct.

  Explanation:

  AnyConnect-victory - 3.1.03103 - k9.pkg-> of the Web deployment package for Windows platforms

  AnyConnect-macosx-i386 - 3.1.03103 - k9.pkg-> of the Web deployment package for Mac OS X «Intel» platforms

  AnyConnect-macosx-i386 - 3.1.03103 - k9.dmg--> package Standalone DMG for Mac OS X «Intel» platforms

  AnyConnect-linux - 3.1.03103 - k9.pkg-> of the Web deployment package for Linux platforms

  AnyConnect-predeploy-linux - 3.1.03103 - k9.tar.gz--> package stand-alone tarball for Linux platforms

  AnyConnect-PreDeploy-Linux-64-3.1.03103-K9.tar.gz-> standalone package for 64-bit Linux platforms

  Do you happen to have a better set of step-by-step instructions for getting the AnyConnect server running on my router?  The instructions I was able to find are really GUI based and I am looking to deploy this via command line.

  I found a few articles on the Internet, but I recommend Cisco documentation

  Articles:

  (I was not analyze these documents carefully).

  Configuration of routers Cisco IOS Cisco AnyConnect VPN SSL (WebVPN)

  How to configure Cisco SSL VPN aka WebVPN.

  Cisco AnyConnect Tunnel with the CLI configuration

  SSL VPN in IOS 12.4 T

  Cisco:

  IOS 12.4 T-> 12.4 T - SSL VPN Configuration Guide

  IOS 15-> SSL VPN Configuration Guide - 15 M & T

  ________________

  Best regards
  MB

  Please note all useful posts

  THX

• Configure the ASM without ORACLEASM drives

  
  Guys,

  I found that right for your perticular kernel asmlib is a PAIN. (I also came to know Oracle dsnt predict asmlib rhel 6)

  Finally, we can find those, but can any 1 share knowledge how to configure the asm without Asmlib drives?

  I mean I dnt want to use/usr/sbin/oracleasm createdisk/dev/sdb5 (like this)

  Now if you ask me what operating system, my OS is RHEL 6.3, but I would like to know for all versions of configuration asmlib.

  DB: 11.2.0

  Which records exactly? Local? NAS? SAN? Single path of I/O? Multiple I/O paths?

  The Linux kernel will automatically enumerate all devices h/w - and udev to create entries of device for these devices. Then all devices scsi for devices SAN/NAS/local lands in tree in/dev automatically.

  However, the device names are not static (not even local devices as a new drive added to the server may have an impact of the names of existing devices). So in general, the names of devices directly deprecated. Same fstab/etc/fstab of the kernel utilisΘ string of identifier.

  If you have multiple path i/o devices, the multipath driver should be used.

  If you have devices path of single e/s (e.g. NAS/iscsi), then you can do the following.

  1. Identify devices using lsscsi
  2. Use fdisk to create one (for example partition 4) partition on the disk, and then assign him da (Non-FSdata) partition type. This allows you to identify via the number of partition storage devices (i.e. all 4 partition are storage). The partition type is a safeguard against accidental to mount the partition as a file system.
  3. Create a udev rule to call for partition devices 4:
     file #: /etc/udev/rules.d/99-oracle-asmdevices.rules
     KERNEL == "sd * 4", BUS == "scsi"PROGRAM="/etc/udev/scripts/localdev.sh %b", SYMBOLIC link += "asm / $result", OWNER = "grid", GROUP = "oinstall", MODE = "0660" "
  4. Create a udev script that will create a special link to device ASM to ASM to use, for example

  #!/bin/sh
  # file:         /etc/udev/scripts/localdev.sh
  # descr:        outputs logical device name for a local asm scsi target
  
  TAG="[scsi]"
  BUS=${1}
  DRIVE=`echo "$BUS" |  sed 's/://g'`
  
  targetname=disk-${DRIVE}
  
  logger -t $TAG -- "/etc/udev/scripts/localdev.sh bus=$* target=$targetname"
  
  echo "${targetname}"
  #eof
  

  So when a partition device 4 is detected, a device entry is created for in/dev/asm. I used a very simplistic device (drive-busid) naming scheme. You can get the WWID of the device and assign more readable names.

  You now discovery point ASM string drive in /dev/asm / *.

  Once you enter the basics above (it is not that the resort), you can get very creative with how you want to identify the devices for ASM usage - and how you create and name (symbolic link) of the names of devices for ASM.

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• Should what configuration of iMac I look for to achieve the app development?

  Looking for ideas on cost-effective configuration of office people as for application developers.

  Current processors and disk capacity will be OK for pretty much anything - you'll be happier with more memory and large screens.

• After deleting saved password and the connection to outlook he autologing got me in without asking for password, how do I stop this?

  I've removed the password registered and logged, after going to outlook.com it comes automatically me relogs without asking for a user name or password.

  Hello qqquestion, websites usually set cookies to store information that your browser is currently connected, so you have to make them disappear too: delete cookies to remove the information from Web sites is stored on your computer

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• Problem restoring last Session in Firefox. It restores the last session without asking for password

  whenever computer stops because of the cut to the top or any other reason while you work in Mozilla Firefox as the use of Facebook. When you turn on the computer and open Firefox it stores the session, without asking for password or username that the effects seriously privacy.i has been using Facebook on Mozilla and my computer shuts down after a few minutes, another has turned on the computer and it went into my account on Facebook because of the last session of restoration. Please, do something about it. This is a larger problem in Firefox

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (no HTTPS, default in the Firefox 3 versions) on the topic: config page to disable the registration of cookies via session restore.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO.

  How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO. Could someone tell me just for the selection of the menu where I can search for a song by keyword and buy it?

  If it's on your iPad, then go to the app Store in iTunes, you can buy music from there

  If you do not want to use Apple music then turn it off on your iPad via the settings > music > Music Show Apple 'off '.

• stop a loop without waiting for its next iteration

  I wonder if there is a good way, or still anyway to stop a while loop without waiting for its next iteration. Lets say you have a timer in the loop so he iterates once evey 10 seconds, and then you have to wait 10 seconds for him to stop after you press a stop button that could be a problem.

  Thank you!

  
  

• Please tell me about the configuration of foglight 7.0 for Hyper-V 2012

  Hello

  I'm looking for a configuration of foglight 7.0 for Hyper-V 2012.

  But I encounter an error that I do not understand.

  This is error message below.

  2013-08-09 10:13:00.599 ECHO WARN [HV0 - WIN - N85SESVGPEH.foglight.com AgentStatusService] com.quest.glue.core.agent.StateChangeRequestProcessor - could not acquire lock necessary for travel agent HyperVAgent/5.6.10/HyperVAgent/HV0-WIN-N85SESVGPEH.foglight.com to ask the State DATA_COLLECTION_FAILED. The agent may be in an unexpected state. java.util.concurrent.TimeoutException: impossible to acquire the WRITER lock to the HyperVAgent/5.6.10/HyperVAgent/HV0-WIN-N85SESVGPEH.foglight.com agent because it is owned by another thread (s).  One or more of these threads can be hung or an impasse. to com.quest.glue.core.agent.AgentInstance.acquireAgentLock(AgentInstance.java:1642) to com.quest.glue.core.agent.StateChangeRequestProcessor.setAgentStateUnderLock(StateChangeRequestProcessor.java:92) to com.quest.glue.core.services.AgentStatusServiceImpl$ 2.run(AgentStatusServiceImpl.java:77) to java.lang.Thread.run(Thread.java:662)

  Please find attached the file located each configration of my environment.

  WVE 7.0 is windows 2008.

  Hyper-V is windows 2012 with AD and Key Distribution Center.

  Please help me.

  Best regards

  Hello

  If you create a pension deal since there are a few things that need to be checked in your environment to determine the root cause of the problem, it would be more helpfu.

  Sincerely

• unlock the drive without password for bitlocker in windows 7

  unlock the drive without password for bitlocker in windows 7

  FORGET password & key recovery

  Help, please

  Hello

  In your Microsoft account. To get your recovery key, go to BitLocker recovery keys.

  • Or ask for help:
  • Ask someone with administrative privileges on the same PC to unlock with their key.
  • If your PC is connected to a domain (usually a computer from work or school), ask a system administrator for your recovery key.
  • If you still can't, you will have to reset your PC. Learn how.
  • Related topic:

  «Have forgotten the password and not be in immediate possession of the recovery key, your only chance to unlock the drive is if you supported the key until your space storage Microsoft Account or cloud (e.g.: Dropbox, OneDrive).» The key to your Microsoft Account backup can be done during installation for Windows 8 and later, but is not supported by Windows 7 built-in mechanisms. As you use the latter, you would have had first to save the key to an offline storage device (for example: USB key) and transfer it to OneDrive or another cloud storage provider. »

  http://superuser.com/questions/790379/BitLocker-lost-BitLocker-password-and-recovery-key