Configuration of Cisco's 861W N wireless network

Similar Questions

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• Is it possible to use WRT610n to create a secondary wireless network?

  Hello

  I want to know if it is possible to configure the WRT610n to create a second wireless network? I have an ISP provided the router cisco that my primary wireless network, but some devices do not like this router wireless. So I want to set up (if possible) my WRT610n to be connected to the cisco router and create a different RANDOM with SSID secondary network.

  Thank you in advance for your answers.

  Saltrock04

  This works perfectly.

  Thank you for your help.

• Photosmart HP 7520: CHANGE THE configuration FOR MY PRINTER HP 7520 wireless

  When my printer has been set up by my neighbour she has implemented using his MAC wireless network.  She moves and will dismantle its printer and now I wonder if my printer still works or I need to set up wireless myself.  If so, how do that before she moves so my printer does not work?  A computer expert quoted me the sum of $150.00 to do this for me, but I hope I won't have to resort to that.  Thanks for your help.

  Hi @filgrastin and welcome to the Forums!

  I see that you are looking in the wireless options. I would like to help.

  There are two routes, you can opt for printing, if you lose the network, sure it is.

  First of all, if you have your own wireless network, you can connect to:

  The software configuration of the printer to a wireless network for the e-all-in-one printer series HP Photosmart 7520

  Second, you can connect a USB cable and print via a wired connection.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Problems of connection attempts WIN 2000 machine to the net via wireless network

  Sorry, I know this is an XP forum, it is a question of WIN2000 - I hope someone can help.

  I have a wireless network using WEP - try to connect to laptop WIN2000: router wireless card the two NETGEAR.

  I have configured the sw of the laptop wireless networking and now get indication * that I'm connected to the network *.

  However - to try opening a browser, the indication is that there is no internet connection available. (Side: if I run an ethernet cable into the port on this machine, I can connect.)

  Got a limited assistance of internet service provider - ran ipconfig / all.  One thing that seems to stand out is the line "' active... IP routing: No."-I'm over my head at this point, but that seems important to me. " Next line is "WINS Proxy enabled: No.»

  Can someone help me out here? The information I have provided is important? (I can provide more information to ipconfig) All I can configure here (? activate IP routing?) Other (s) diagnosis I can do?

  Any help would be most welcome!

  Kind regards

  Bob T

  Hello

  Win 2000 has no internal support for the wireless.

  In order to launch the wireless, you must use a wireless card that provides you with Wireless Manager and drivers for the card on Win 2000.

  Once you have installed the drivers and the utility is launched, you should power set up the connection to the router wireless.

  Start first with the security of the router, enable WEP, once you know that you can log in and access the Internet.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Router E4200, cannot secure the wireless network

  When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »

  I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.

  When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.

  It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.

  TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.

  Do a reset factory and set up from scratch.

  If this fails, try this:

  Manually download the FW file to the local office of PCs.
  Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
  Factory reset the router once more and set up from scratch.

• I have to install the printer software complete on all 3 computers on my wireless network

  Range of printers all-in-one color Laser HP CM1312 (USB connected to the Dell desktop computer) Windows XP - 32 bit

  HP Deskjet F4280 all-in in color printer (USB connection for HP Desktop) Vista

  Dell Windows XP 32-bit laptop

  all computers connected wireless to my network

  printers appear on all three computers, but will not print documents on the Deskjet F4280 printer?  Even the office connected directly to the F4280!

  Do I need to install the complete set of the software of the printer to the printer on EACH computer, or the device software to connect to each workstation?

  Hello

  To get all the features of each printer, you must install drivers and applications of EACH printer on EACH machine except when configuration allow pinters to join the wireless network

  Kind regards.

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

  Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

  Turn on AirPort Extreme for a few minutes... If it is not already turned on

  Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

  Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

  Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

  To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

  Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

  When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

• Could not get the option to 'Create a wireless network' in configuration

  Hi guys

  I am trying to run myRio-1900 as an access point, but I don't have the ability to "Create a wireless network" in its configuration. I installed NOR-RIO 13.1. What could I have done wrong? Have installed something wrong?

  Hey John,

  Have you gone through the steps in this document of reference and do not see the option to set up a network without wire anywhere OR Max or in the web interface?

  http://zone.NI.com/reference/en-XX/help/373925B-01/myriohelp/myrio_creating_wireless_networks/

  Also, have you installed the toolkit myRIO, shown here?

  http://www.NI.com/download/LabVIEW-Myrio-Toolkit-2015/5518/en/

• "Use Windows to configure my wireless network. is missing

  Hello:

  There is NO connection of Belkin Wireless adapter flashes to pick up the signal.

  Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.

  Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.

  How do I fix this problem?

  Thank you for your help in advance.

  Hello

  I suggest to follow the steps in the below links and let them know the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  To set up automatic wireless network configuration:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  For more information:

  Follow the steps in the link to configure the adapter Belkin Wireless below:

  http://www.Belkin.com/support/DL/p75451_f5d8053.PDF

  If the problem persists, then I suggest you to contact the Belkin Support:

  http://www.Belkin.com/us/support

  I hope that the information above helps you.

  
  

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Is there a way lot of XP wireless network configurations?

  We have many users who need to connect to our new wireless network. They are all running Windows XP pro. I'm trying to see how we can configure their machines via a batch file.

  Thank you.

  Hi TechNATL,

  Thank you for using Microsoft Answers!
  The netsh.exe with switch control - wlan is what you are looking for.
  Unfortunately, Windows XP does not include the switch wlan - while Vista and 7.
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242