HP configuration wizard does not detect my wireless network.

Similar Questions

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Satellite sometimes does not detect the wireless network

  Hello

  My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

  Hello

  Well, in most cases the WLan driver update could solve this problem.
  In addition its advised to check the firmware of the might of Wlan router must be updated as well.
  I recommend also to reset the settings of the WLan router and set it up again

  Another idea; Disable the save option in Win 7 the power supply WLan management

  Welcome them

• HP Photosmart Plus 209 a - m does not detect my wireless

  I have a HP Photosmart Plus 209 a - m wireless all-in-one printer and I use Windows 7 for my OS. The printer does not detect my wireless. I checked the setings wireless to the printer. Wireless is on and working, but it fails to detect our SSID.

  I used print and Scan doctor but who could not connect to the printer. I tried the printer on my computer but my computer does not detect it. I tried to download the HP software to reinstall the printer, but I received a message stating that the printer was not connected.

  This printer has worked with wireless network in the past. I suspect a recent change in the disposition of our wireless network might have caused the problem, but I don't know how to fix it.

  Any suggestions?

  So I solved the problem by uninstalling the "upgradeprinter" (that's what my computer was recognizing the HP Photosmart Plus 209 as). Icon in the list of printers for the HP Photosmart wouldn't let me not uninstall this printer at that time where (the button uninstall is not usable). I kept the HP software installed and I kept the printer connected to the computer. The computer uninstalled you 'Upgradeprinter' then restarted. When the computer restarts automatically began to reinstall the HP Photosmart Plus printer correctly. I don't know if he has begun to do this because I tried redownloading the installation software, because the HP software installed always, either because the printer is connected to my computer. I decided to ask it was useless as long as it works. The printer is installed properly, but after you run a scan with print and Scan doctor, I found that it was only installed to run on the USB port. I ran the software Wireless USB. Attempts to do this before the reinstall failed because the software failed to detect an HP printer connected to my computer. This time, it worked. My computer can now print to the printer HP Photosmart Plus wireless. Added to * beep *, then I could uninstall the previously installed printer because the Uninstall button, which wouldn't work not before, now worked.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Applications Windows does not detect my wireless controller

  Windows applications (windows store games) does not detect my speedlinkxeox wireless controller pro, earning 8.1 and win 10, but it works perfectly fine on pc games. Tried many games. Yes with the receiver. Is there a work around for this problem, I have the drivers installed too.

  Hello sunny

  Thanks for posting your query on the Microsoft Community.

  You can deal with this issue because of a corruption in Windows applications.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. You receive no error message / error code on your system?

  I suggest you to follow the below methods and check.

  Method 1: modern convenience store app.

  The modern convenience of the app store is built in the Troubleshoot utility which can detect and automatically correct most of the errors of the app. So, I suggest you to download and run the troubleshooter modern app to fix application errors.

  You can download it here:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If the problem persists, try Method 2.

  Method 2: I suggest you to follow the steps described in the article below and check.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• BlackBerry Torch 9800 smartphones does not detect the wireless Ad Hoc network

  I try to connect my Torch 9800 for the ad-hoc WiFi network, I put in place on my Windows 7 PC with Internet sharing.  However, the torch does not list even the SSID in the list of detected networks.  I confirmed that the network Ad - Hoc on Windows 7 is in mode ' Waiting for Users ' and the torch can detect other networks nearby.  I tried clicking on "Other ways to connect" and manually enter the SSID, but it still doesn't work.  I've also confirmed that other devices (an another laptop Win7 and an iPad) have no problem connecting to the Ad Hoc network and Internet connection sharing.  Any ideas?

  * AT & T wireless

  * Bundle version 6.0 267

  Hi and welcome to the forums.

  I'm sorry to say that for safety reasons RIM disabled their devices to connect to ad hoc networks

  I know that his frustration... Sorry

  Good luck

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Oracle Fusion Middleware Configuration Wizard does not display alternative OAM

  @

  I m install OAM. I installed Weblogic and the MRI suite. When I start the Oracle Fusion Middleware Configuration Wizard, I expect to see an alternative to choose to create a new domain or use an existing one. Im not seeing this and rather Im getting a text information of General information. When I click Next I get only the alternative to configure OIM OAM not or any other component.

  No idea why this is?

  Hello Stefan,

  Where you start the config.sh from? It must be run from $MW_HOME/oracle_common/bin/config.sh

  You can then select either a new domain or extend an existing domain, where you can select Oracle Access Management.

  Kind regards

  Jeffrey

• Satellite A200-244 does not connect to wireless networks

  Hello
  I bought a Toshiba Satallite A200-244 a few months back. It worked falwlessly with my Virgin internet router from the beginning, but suddenly I am disconnected during navigation. I was not able to connect to the network since. It shows the network when I try to connect it says * unable to connect * I diagnose the problem, but still does not work. I know somethings wrong with the laptop, because the other companions of House have no problem connecting to the network.

  I tried the things:

  -Put the router for 30 seconds and then turn it back on.
  -Updated network adapter drivers. (Intel PRO/Wireless 3945ABG)
  Search - forums but they all say of the complicated stuff related to the register and all, tried what ever I could catch.

  Tech gurus out there, please help me!
  Thanks in advance

  Checked settings in Windows? Maybe there's something wrong in the configuration DHCP network or something.

  Turn off the router, unplug it from the power source, wait about 10 minutes, plug in the power supply and turn it on.

  If the problem persists, you should load the router factory settings. Then after you should check, if the router and the wireless network adapter using the same standards.

• My HP 8500 Wireless printer does not see my wireless network.

  Using my wireless HP8500 printer, I am unable to see my wireless network.  I recently bought a Linksys EA6500 router and this is when the change occurred.  I am Windows 7 64 bit on my laptop and desktop.  Does anyone have suggestions on what to do?  the printer is able to see other networks in the vicinity, but not mine.  My Network works fine with all my other devices.

  Thank you!

  I don't know what is happening here.  Cisco routers are usually pretty good at this stuff.

  That is, you can run Ethernet (Cat5) that should work and avoids all the problems wireless.  Your ipad/iphone will not worry how the printer is connected as long as the router can communicate with it.

  Once you connect the printer to the router with Ethernet, we will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• Windows XP does not have the wireless network key.

  original title: Windows XP. A Wi - Fi connection

  I have windows XP. Then when I connect to the wi - fi network secure, it should ask me password, but it doesn't. How to fix this?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like Windows XP will not ask for the password.

  However, we need some more information about the issue to help you better:

  Please help me to answer these questions.

  1. what type of encryption do you use on the router?
  2. do you have the latest drivers for your wireless network card?
  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.
  a. click Start, then select run.
  b. in the Run dialog box type ncpa.cpl and click OK.
  c. right click on the wireless network connection iconand select Properties.
  d. click the Wireless Network tab
  e. click on the Properties button next to remove it.
  f. click on the authentication tab, and clear the enable IEEE 802. 1 x authentication for this network check box.
  g. click OK to Update the settings.

  In addition, visit this link for reference:

  How to troubleshoot wireless network connections

  http://support.Microsoft.com/kb/870702

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Laptops do not detect the wireless network

  Only 1 of the 3 laptops detects my wireless signal.  I restarted the router, the modem, and other portable... no change.  The signal is strong on the computer, pick up the signal.  What's wrong?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  It will be useful.