Configuration of encryption on CUCM 8.6 and unity 8.6

Similar Questions

• CUCM 10.5 and Highway 8.2! How can I register? RSA + cert organizes key?

  I cucm 10.5 and Highway 8.2

  I use no TLS connection. just trying to find the highway and cucm.

  I can record jabber for iphone on IM & P inside.

  CUCM and statues IM & P is good.

  and that I changed my network to network outside on my wife's phone.

  Jabber for iphone is registered on cucm. but IM & P is not...

  so I restart a Jabber app and try again.  It does not work all.

  External DNS

  SRV record: _collab - edge._tls.domain.com

  _sip._tcp.domain.com

  _sips._tcp.domain.com

  _sips._tls.domain.com

  inside DNS

  SRV record: _cuplogin._tcp.domain.com

  _cisco - uds._tcp.domain.com

  VCS - c

  1 CSR / download certificate signed CA / and x.509 certification authority root

  2 traversal area (type =) through unified communications

  VCS - e

  1 CSR / download certificate signed CA / and x.509 certification authority root

  2 traversal area (type =) through unified communications

  status - unified communications

  everything is good!

  It's newspapers of vcs - e

  2014-10 - 10T 17: 06:51 + 09:00	sshdpfwd [32043]: received disconnect from 203.228.204.1: 11: disconnected by the user
  2014-10 - 10T 17: 06:50 + 09:00	"" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "child user is on the NEST 32043" elements UTCTime ="2014-10-10 08:06:50"
  2014-10 - 10T 17: 06:50 + 09:00	"" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "publickey accepted for xxx.xxx.xxx.xxx port 12209 ssh2 pfwd: RSA + cert 8e:20:23:4 d: 5e:07:b9:89:84:3e:6 c: 10:58:66:47:cb" elements UTCTime ="2014-10-10 08:06:50"
  2014-10 - 10T 17: 06:50 + 09:00	"" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "authorized by X 509 (rsa): CN = vcsc.daeshin.com, OR = O = cisco, cisco, L = cisco, ST = cisco, C = kr" elements UTCTime ="2014-10-10 08:06:50"
  2014-10 - 10T 17: 06:40 + 09:00	"" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = "12209 port 2222 xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx port connection" elements UTCTime ="2014-10-10 08:06:40"
  2014-10 - 10T 17: 06:40 + 09:00	"" sshdpfwd: Event = "sshd" Module ="openssh" Level = "INFO" detail = 'sshdpfwd run in non-FIPS mode"elements UTCTime ="2014-10-10 08:06:40"
  2014-10 - 10T 17: 06:40 + 09:00	"" sshdpfwd [32030]: Event = "sshd" Module ="openssh" Level = "INFO" detail = 'value/proc/self/oom_score_adj to 0 value'elements UTCTime ='

  ? all_text = VVRDVGltZT0iMjAxNC0xMC0xMCAwODowNjo0MCI = "" > 2014-10-10 08:06:40 ""

  VCS - c

  2014-10 - 10T 17: 08:51 + 09:00	"" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "bytes per second: sent 64953.8, received 39595.1" elements UTCTime ="2014-10-10 08:08:51"
  2014-10 - 10T 17: 08:51 + 09:00	"" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "Transferred: sent 4672, received 2848 bytes, in 0.1 second" elements UTCTime ="2014-10-10 08:08:51"
  2014-10 - 10T 17: 08:51 + 09:00	"" "ssh: Event ="sshd"Module ="openssh"Level ="INFO"details ="authenticated to vcse.daeshin.com ([xxx.xxx.xxx.xxx]: 2222)." "Elements UTCTime ="2014-10-10 08:08:51"
  2014-10 - 10T 17: 08:40 + 09:00	"" "ssh: Event ="sshd"Module ="openssh"Level ="INFO"details ="key for the RSA host IP address + cert ' xxx.xxx.xxx.xxxnot in the list of known hosts." "Elements UTCTime ="2014-10-10 08:08:40"
  2014-10 - 10T 17: 08:40 + 09:00	"" ssh: Event = "sshd" Module ="openssh" Level = "INFO" detail = "port Allocated 35525 for distance forwards to localhost:8443" elements UTCTime ="2014-10-10 08:08:40"

  is this wrong? The IP address of the RSA host key + cert ' xxx.xxx.xxx.xxxnot in the list of known hosts

  Did you use FQDN in your way Express-e and c configuration? CSR was based on the host name or the IP address?

  Did you use the hostname in your configuration of the crossing area or IP?

  Have you tested using jabber for windows?

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• Example of configuration, VPIM between the unity and Unity express

  I neet to configure the network of VPIM between unit w/Exchange and 3rd-party voice messaging system and want to familize functionality. That's the analogy between unity and unity express research. I can understand between the unit and Exchange, but do not know how it works between Exchange and the express unit. specually the requirement of the domain.

  Can I get the sample configuration for configuring VPIM between unit w/Exchange network and the express unit?

  Thanks in advance,

  Networking VPIM can be used for networking between Unity and Unity Express, just as it can be used for networking with a third-party system, however, each have their own implementation. Unity Express does not connect to the Exchange. I suggest you re-read the chapter ' using VPIM for Networking with Cisco Unity Express or other Cisco Unity Systems "to http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_feature_guide_chapter09186a0080449a39.html and Cisco Unity Express Networking guide at http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5520/prod_configuration_basics09186a008035bbdb.html.

  A third-party system would have concepts comparable to the implementation of unity VPIM, but would not exactly be the same - see the documentation of that system for details.

• I had hearing for 2 years.  Today, it crashed.  He made a mistake of configuration: 16 the message said to uninstall and reinstall.  Yes, I did.  Still the same error.  Then, I searched the forum and checked the two folder permissions.  They were right. 

  I had hearing for 2 years.  Today, it crashed.  He made a mistake of configuration: 16 the message said to uninstall and reinstall.  Yes, I did.  Still the same error.  Then, I searched the forum and checked the two folder permissions.  They were right.  Then what should I do?

  Hi Charles,

  Please see the following help on the problem article.

  https://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

  I hope this helps.

  Kind regards

  Sumit Singh

• I've just upgraded to PSE 12 and first E 12 and tried to installed several times.  Pop up says "Configuration Error"; contact Adobe Tech Support (?); and "mention the error code 1"!  Help please!

  I've just upgraded to PSE 12 and first E 12 and tried to installed several times.  Pop up says "Configuration Error"; contact Adobe Tech Support (?); and "mention the error code 1"!  Help please!

  Installation seems to work fine until, and including 'Technologies share '...

  I have cleaned all the disk *.tmp files, deleted all the shortcuts and various Adobe programs and he then successfully installed.

  Now, if I can get the updates to work.  There is always a challenge with the Adobe software.

• How to configure the size of the symbol % (width and height)

  How to configure the size of the symbol % (width and height)

  shoud you have your symbol in % and also your image in % file, when you have changed both of the theme to % then your image will change as expected.

  and if you want to make your image immutable able and set the position that you need to change your % step also

  I made some photos to show you...

  

  

  

  

• How can I configure encryption for sending / receiving information, and when I have to do?

  I would like to send and receive encrypted e-mail and other info, but I don't know how to put in place, I am a novice. Any help would be appreciated.

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• I installed Thunderbird into new Powerbook Pro & see the old you do not get more emails. IMAP configuration. Reception to the i-phone and i - pad

  Before that I received emails in my i-phone, i - pad, and two other computers (powerbook pro)
  Now with this new facility to stop everything. I only receive in the new computer.

  Says Davy

  Before that I received emails in my i-phone, i - pad, and two other computers (powerbook pro)
  Now with this new facility to stop everything. I only receive in the new computer.

  I discovered! and it works now. I had made a mark in the new configuration of Thunderbird to the new computer with the main. He became the only!

• Configuration of the BIOS XW8600 for SSD and HDD

  Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options.  250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.

  I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive.  I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.

  I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it.  This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.

  Can anyone offer any suggestions or comments on how I can improve this situation?

  Thanks for any help, you can suggest.

  What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP?  If I remember well Vista 64 was the latest HP OS with sold.  In this case you won't have to deal with a set of HP restore disks.  I would never do an "upgrade" of a prior installation of OS in W7.  I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD.  I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).

  Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD.  That will take some time.  Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.

  The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.

  Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago.  It is an important.

  Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation.  Change that on "RAID + AHCI.  Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.

  Demarrer start on the DVD, select clean install and things will be fine.  I usually set my boot order to start hard drive/SSD first and second optical drive.  Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.

  It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed.  I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores.  I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.

  After you have things working with the SSD and the DVD player you can add in your other material sequentially.  I would like to make a reboot between each addition, just be very careful.  Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.

  All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.

  Let us know how things are, so that others can enjoy...

• Problems with encrypted Prestige 2 TB drive and Windows 8.1

  So I have an Iomega 2 TB external hard drive of Prestige that has been and is still working very well. I recently updated my computer to Windows 8.1 and now when I connect my hard drive to my computer, the Iomega encryption software does not recognize the drive is connected, so do not let me unlock it. I tried to connect to another computer running Windows XP and the software recognized and unlocked it very well, but as the reader has a GPT partition style, I guess that's why this computer would not read the drive, once it has been unlocked. So basically my question is is there a way for me to access my disk encrypted on Windows 8.1 or if not there at - it other software I can use to unlock it?

  Oh also, the reader communicates with my computer as when I plug it into the virtual CD with the Iomega utility encryption Setup appears, it's just the actual program does not see the drive.

  Good then I discovered why my hard drive did not work properly. After contacting the support of microsoft, it turns out that the Windows update 8.1 some chipset drivers had not updated and therefore to prevent playback of my disc. in any case, just the display in the case where a person has a similar problem.

• How to configure my mac to always send pictures and music on an external hard drive?

  I have a desktop Mac that has limited memory.  I bought an external hard drive to store all my music, photos, and videos on.  How can I configure my mac while iPhoto and iTunes always point to the hard drive and save it (and not on the hard drive on my Mac)?

  Launch applications with the key Option key and choose or create a library on the external hard drive. Unless they are launched while the disconnected player or a problem arises, you won't have to start over.

  IPhoto needs to be stored on a volume formatted as Mac OS extended. You should also keep copies on a second external drive in the event of failure of one.

  (136681)

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• How can I configure Outlook Express 6 to receive mail and my smart phone.

  original title: Outlook Express

  I recently bought a smart phone and set up the email.

  Now, all the e-mail goes directly on my phone.

  How to configure Outlook Express 6 to allow a copy of my mail to get to my phone and Outlook?

  Please don't say Outlook and Outlook Express in the same sentence. They are completely different programs.

  In OE: Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server. On your "smart" phone, you must do the equivalent.

  OE or your smart phone, you want to check for delete after X days. Enough time to get the messages on both, but not exceed your space on your e-mail server.

  Even if you have me say what kind of phone and which provider you use, I could not help you any further. If you don't see the option on your phone, call your support of wireless technology. You pay for it in your contract and they should be happy to help you.