configuration of Eve ISP - simple simple

Similar Questions

• configuration of the plugin simple text report

  I am updating a project of Teststand 4.2 for 2012. The original was a text via a report updated the sequential model and ICB code. I have trying to find current best practices to achieve a similar report.

  I installed the plugin to report simple text example but can find no documentation on how to configure it.

  The example works fine, but the columns have no limits or the measured value and have other items that I didn't need.

  Looking through the code I can see these are defined in the settings of the plugin, but I do not see where in my project to put.

  I'll also have to configure the report header and the name of the file.

  David

  What exactly do you mean by "key values"? Are you referring to the Key property in the NI_SimpleTextReport_CVI.seq?

  

  In order to get the type of comparison of a numerical limit test, for example, you can use an Expression like this post:

  Locals.ComparisonType = Step.Comp

  This would amount to "FROZEN".

  Regarding the addition of the results of the report, the key values are a string of research compared to a result object. In this case, you can add what you want to log on to the other results of this approach. Then, you can add a new column to the report in the NI_SimpleTextReport_CVI.seq file and the value of the key:

  AdditionalResults ["NameOfAdditonalResult"]

  

  

• How to configure SCC-Ci20 ISP with SCC-68

  I'm trying to measure a current analog signal using scc-ci20 scc-68 and pci-6221.

  I used the scc-68 for analog measurement signal voltage using analog terminals, so the scc - 68 and pci-6221 are well configured.

  What I did:

  I added the scc-ci20 "measure and explore automated" under the scc - 68, CSC - mod 1

  In the software labview in the DAQ assistant, I added a new channel for current measurement and physical channels appearing were "aio, ai1' which is the channel of the Terminal screw 1 Module and not of the scc-ci20 terminal block.

  Also, I connect to the meaning of the Al to Al GND.

  I don't know, if the DIF in how to configure the current module or how I connect the resistance to the Terminal Board and the scc-68 port.

  Hi Egptos,

  The SCC-CI20 channels are grouped in a differential measurement that is able to fill two separate loops, so the ai0 ai1 and. AI0 is the bundling of channels 1 and 2 on the module, who complete a circuit, and ai1 represents channels 3 and 4 that complement a second loop. The resistance of shunt used by the module to take the current measure is incorporated in the module.

• UNIQUE between Simple mode and open authentication possible OAM?

  Hello
  
  Our SSO OAM in 'Open' mode (WP, PM, AM, AAA and ID).
  
  I would like to configure an applications in SIMPLE mode between the access server and webgate. But still I'd like to preserve, single sign - on, when the user accesses the protected open OAM application.
  
  Is this possible? Thank you.

  Yes, possible. The transport application component security mode has no impact on the end user SSO.

  Technically, the mix of modes (simple and open) is not supported. If you have installed some AAA servers more in simple mode you can connect your webgate to those simple ones more and not the other (open mode) to avoid this problem.

  If you need to share the existing AAA servers you will need to bring the listening in BOTH modes. This used to work even if I have not tried with recent versions. The technique is to (re) configure the AAA servers in Simple mode and then pass the parameter mode back to open the profile of component in the directory (via the admin UI).

  Mark

• ASA-SSM-20 on the active failover configuration

  You can synchronize configuration between two IPS systems data?

  I have two ASA-SSM-20 (6.1.1 E3) one in each of my the SAA. Of the SAA is the shift in assets. During the configuration of the IPS module I always make these same changes also in the standby unit. Is it possible to synchronize to the top of these two survey periods, so when it is configured the other is updated?

  Thank you very much

  Unlike the SAA, there not an automatic function to preserve the configuration synchronization through SSMs 2.

  A few options:

  You can use the command copy to copy the configuration of a sensor to a ftp/scp server.

  Then use the copy on the second sensor command to copy the configuration on the second sensor. During the copy, it will ask whether to change the IP of the probe to what is in the configuration file. You will need to tell it to NOT change IP of the probe, otherwise you end up with 2 SSMs with the same IP address and are struggling to connect to them.

  Another option is to use the CSM. CSM has configuration that applies to simple sensors, but also the group configuration that can be applied across multiple sensors.

  If you have used the group configuration, then you could make one change to the configuration of the Group and apply it in all the sensors in the Group (you will place your SSMs 2 in the same group).

• Double balancing while NAT is based on the load ISP

  Please send me an example configuration for dual ISP load balancing while NAT is running.

  ollyahmed,

  If you are looking specifically for a router, then the following configuration would be good.

  There is a quick need to change the configuration depending on the type of configuration you use, I mean (QOS policy, follow-up (ip SLAs) and route directions.

  version 15.2
  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  IP cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  track 1 accessibility of als 1 ip

  !

  Track 2 accessibility of ALS 2 ip

  !

  class-map correspondence Skype

  Skype Protocol game

  !

  Skype-political policy-map

  class Skype

  DSCP ef Set

  !

  interface GigabitEthernet0/0

  Description of the IP LAN 10.0.0.1 255.255.254.0 nat ip in ip virtual-reassembly speed automatic duplex

  !

  interface GigabitEthernet0/1

  TASK description

  address IP 213.192.65.106 255.255.255.252 ip access-group 101 in ip nat outside ip virtual-reassembly in crypto of automatic speed auto two-sided map political GLIWICE-map service entry out of service-policy Skype-Skype-strategy

  !

  interface GigabitEthernet0/2

  Description of the "Wit-NET" 0030.4f61.5521 193.107.215.133 mac address ip address 255.255.255.224 ip access-group 101 in ip nat outside ip virtual-reassembly speed automatic duplex
  !

  IP default-gateway 213.192.65.105 ip forward-Protocol nd

  IP nat inside source map route nat_isp1 interface GigabitEthernet0/1 overload ip nat inside source route nat_isp2 interface GigabitEthernet0/2 overhead map

  IP nat inside source static tcp 10.0.0.24 777 193.107.215.133 777 extensible ip nat inside source static tcp 10.0.0.2 1723 193.107.215.133 1723 extensible ip nat inside source static tcp 10.0.0.24 213.192.36.106 777 777 stretch
  ! - the more static routes has been omitted.

  Route IP default-network 213.192.65.105 ip 0.0.0.0 0.0.0.0 213.192.65.105 track 1

  IP route 0.0.0.0 0.0.0.0 193.107.215.129 track 2

  ALS IP 1

  echo ICMP - 213.192.65.105 source-interface GigabitEthernet0/1
  threshold frequency 2 1000 5 timeout

  IP SLA annex 1 point of life to always start-time now

  IP sla 2 icmp echo - 193.107.215.129 source-interface GigabitEthernet0/2 threshold 2 timeout 1000 frequency 5

  IP SLA annex 2 to always start-time life now

  !

  access-list 110 deny ip 10.0.0.0 0.0.1.255 10.0.100.0 0.0.0.255

  access-list 110 permit ip 10.0.0.0 0.0.1.255 ip 10.0.0.0 allow any access list of 190 0.0.1.255 10.0.100.0 0.0.0.255

  SPECIAL route-map permit 10
  corresponds to the IP 110

  is the interface GigabitEthernet0/1!

  map of route track_isp permit 10 match ip address 101 game interface GigabitEthernet0/1 set ip next-hop 213.192.65.105

  !

  track_isp allowed 20 match ip route map address 102 game interface GigabitEthernet0/2 set ip next-hop 193.107.215.129! map of route nat_isp2 permit 10 match ip address 110 game interface GigabitEthernet0/2! map of route nat_isp1 permit 10 match ip address 110 game interface GigabitEthernet0/1! -See more at: https://supportforums.cisco.com/discussion/11710646/dual-isp-connection-...

• ISPS double and two redundant ASA 5520 VPN tunnels

  Hi all

  I have a requirement that looks like this:

  -with two ISPs (of course public IP of different subnets), I have two firewalls that we have to do 2 l2l VPN tunnels.

  Virtual private networks will be redundant to each other and in the case where one of the links is congested, traffic should pass through the other tunnel.

  Did someone do something like that?

  Thank you

  Vlad

  Hi Vlad,

  To have redundant connections, I suggest the following link:

  ASA/PIX 7.x: example of redundant Configuration or backup ISP links

  To find out when the link is congested? I don't think it could be possible at all on the SAA, with a UDP IP SLA jitter, but I think that it is supported only on IOS routers.

  Analysis of IP Service levels using the UDP IP SLA jitter operation

  Thank you.

  Portu.

  Please note all messages that will be useful.

• Dreamweaver does not work: impossible to analyze Eve...

  Impossible to analyze the day before: / Applications/Adobe Dreamweaver CS6/Configuration/Dialogs/Eve/CustomMessageDialog.eve

  Any suggestions?    Above is the message I get, and Dreamweaver does not work, just hangs.

  Thank you

  Short of re-installing Dreamweaver, any other suggestion, sorry.

• Impossible to analyze the eve: Please help

  Impossible to analyze the day before: / applications/adobe dreamweaver 2014.1/configuration/dialogs/eve/titanoptionaldialog.eve cc

  Help, please

  Hello

  Please, try the following:

  1. Force to leave Dreamweaver so its opening.
  2. Please go to/applications/adobe dreamweaver 2014.1/configuration/dialogs/eve cc location
  3. Take backup of the titanoptionaldialog.eve file and move it to the trash. Remove it from the trash as well.
  4. Restart the DW and check if it works.

  If that don't work then please uninstall and re-install Dreamweaver (also remove preferences) and then check.

  Concerning

  Vivek

• steps for Data Guard with a primary eve and 2

  Hello
  
  Database: 10.2.0.4, 11.2.0.1
  Operating system: Windows, Unix
  
  A > primary database
  B > database ensures 1
  C > database ensures 2
  
  I want to configure * 2 Eve * databases for the single primary database.
  Allows to take, A, B and C are my machines. My Data Guard configuration will be like, * archive logs will be mobile * A to B and A to C.
  
  If I do all passage between and B , now that b is primary and remaining has and C are pending data bases. At this point also, Archives of the newspapers should move from B to A and B to C. In addition, even should arrive from C to A and C to B, if I make the passage between B and C. If all goes well, then I'll do switchback to the main database (A) primary.
  
  How should I mention PFILE in all machines , parameters like
  LOG_ARCHIVE_DEST_1 = LOCATION = < PATH > - LOCAL path ARCHIVE
  LOG_ARCHIVE_DEST_2 = SERVICE =
  LOG_ARCHIVE_DEST_3 = SERVICE =
  FAL_SERVER =
  FAL_CLIENT =
  STANDBY_FILE_MANAGEMENT =
  
  In my tnsnames.ora , primary, standby1 standby2 my service entrances and are even in all of my machines.
  
  Please suggest me, how can configure my pfiles in machines?
  
  Thank you
  Therese

  Please don't forget to update the thread with useful or correct, if you find the answer either.

  Kind regards
  SQuadri

• TC and AE cable network works well, but some settings seem odd

  I was stumped by this for some time.  Despite the fact that everything works well, a setting on my TC seems inconsistent with what would be expected.  Here is a summary of my network:

  1 modem of the IAF was WIFI and DHCP active off the COAST, and it connects to the TC with ethernet.  The IP address is 192.168.1.1.

  2 TC reportedly made all DHCP and NAT functions and peripheral PSI is simply a relay for the incoming connection to broadband.  IP address is 192.168.1.2, ethernet and it is connected using static.

  3 AE network extends the network.  IP address is 192.168.1.3, ethernet, connected using static.

  4 Apple TV 4 does its thing.  192.168.1.4, ethernet static IP address.

  5. I have DHCP reservations for Beach 192.168.1.2 - 192.168.1.10 for these devices, as well as the rest - iMac and MacBook Pro, ethernet, static.

  6 DHCP set temperature 192.168.1.11 to 192.168.1.200 for mobile devices.

  The TC acts as the hub for all the rest and that is why he would hold DHCP and NAT functions, these are disabled on device of the ISP.  However, for my life, I can't not DHCP and NAT to work as router Mode.  DHCP is the only one that works.  I certainly do not have an IP given by the ISP, and there is nothing to indicate that it performs NAT functions.  If I try to change the DHCPand NAT router Mode, I get errors that there is a conflict and that the range is incorrect.  Conflicts of DHCP-range for the base station WAN address.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  Any suggestions are appreciated.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  NAT is handled by the device of the ISP that you call the 'modem'... but this is very probably a device modem/router or gateway... that despite what you think, does not as a simple modem.

  If it were, it must provide a public IP address of the time Capsule and instead provides a private IP address (192.168.1.2) of the time Capsule.

  A public IP address cannot start with 192.x, 172.x or 10.x

  When you have your modem/router configured properly as a simple modem... then... you will be able to configure the time Capsule as the main router to your network using the DHCP and NAT correct setting, without seeing errors like Double NAT or incompatible IP address range.

  Some modems/routers and gateways can be configured to operate as a simple modem, and some may not. If your modem/router provided by your ISP, you may need to check with them to see if the device can be configured to operate as a mode modem simple bridge, providing a public IP address unique to the time Capsule.

  Moreover, when the Capsule is configured as a router, the default IP address range that he uses is 10.0.1.x.  The Capsule will be 10.0.1.1 on the LAN and devices will be at 10.0.1.x.

• Port Linksys e1200 Internet does not.

  I have my router e1200 plugged into my ethernet connection going into the internet port on my router. I can't get internet connection so that on both my wired and wireless clients. When I plug the internet connection directly into one of the ethernet ports, customers don't you address private but share a public address among all hosts. Can someone help me?

  The router must be defective because it is a very simple configuration.

  ISP modem => E1200 (Internet Port) (Lan Port)-online PC

  Unless you have an ADSL PPPoe connection that must be configured in the router.

  Have you tried another Ethernet cable to connect the WAN E1200 to the ISP Modem?

• Problem setting up Port Forwarding with two routers.

  I can't set up by Linksys RT31P2 and routers port forwarding WRT160Nv3.

  My setup is Webstar Modem = RT31P2 = WRT160N = Mac OS 10.6.5. (No configurable modem and ISP do not prevent port forwarding. It comes with two Linksys routers).

  I had a Monty Python-going around with the support of Cisco cat; and follow up with telephone assistance in which the agent knew nothing about port forwarding and his supervisor expressed the view that it was not possible with two routers. Sigh.

  If anyone can help me with step by step specific and simple instructions to configure routers. I know that the basic procedures. I'm not clear, what exactly changes on routers.

  I read that portforward.com has to say and it does not work so I must be misunderstanding something.

  The ip address of my computer is 192.168.1.103.  Are the last three digits of this speech concluded the two routers in the area on the port forwarding page? What other changes should be done what router?

  I know the port numbers that I use are OK because I can implement successfully if I connect to one or other of the routers (but not both), and my software of p2p shows port are open.

  Any help and suggestions most welcome.

  If you set up as I have suggested that you have only a single LAN that will be using in your addresses * 192.168.15 case. So in your case:

  1. change the address LAN IP of 192.168.1.1 to 192.168.15.2 WRT.
  2 disable the DHCP server.
  3. connect the LAN of the WRT port to port LAN of the RT.

  That's all. Disable the DHCP server will not affect whatever it is that you're connected LAN - LAN and DHCP server on the RT is still operational.

  After the change, previously the WRT computers may require a reboot to get a new address 192.168.15. *.

  Your computer to which you are transferring must have an IP static and not dynamic (or variable). Check the current IP information on this computer. It must have an IP address like 192.168.15.103, mask 255.255.255.0, gateway 192.168.15.1 subnet and DNS 192.168.15.1 server or maybe two other IP addresses instead. Note DNS servers if you do not 192.168.15.1.

  Then configure a static IP address on the computer. Use something like 192.168.15.10, 255.255.255.0 gateway 192.168.15.1 and the DNS servers you found before.

  After this implement 192.168.15.10 port forwarding.

• BGP-advertising

  Dear all,

  I have a simple test facility. with MPLS and L3vpn top. I want to the CE router to not see the FAI AS in roads announce another CE router in vrf even connected to another PE router

  How can I block the public from the ISP to the advertising in the BGP updates for routers of THIS. The CE router should see from the other CE router.

  Topology is attached. I want to CPE-1 see only AS 1 in the PMO and not AS4000 update as

  AS-path path

  4000 1 4.4.4.4/32

  but I want to hide AS 4000 so something like this

  1 1 4.4.4.4/32

  Hello - if it's a laboratory facility I would suggest a test using the NEIGHBORHOOD LOCAL-AS. This must be configured in router ISP PE-2.

  PE2(config-t) x.x. #neighbor. x.x local-2

  Please let me know if it works. Thank you

  Best regards / SAIRAM

• can I route private IP block via external interface directly

  Hi all

  Thanks in advance for anyone who can give you your proposal!

  the title is not exactly what I would like to present.

  say, I have a 5510 and two ISP, simple as diagram below:

  outside1 IPX1 - isps1 GW IP X 2

  10.0.0.0 - HQ 5510 - 5520 IPZ outside - 192.168.0.0

  outside2 IPY1 - ISP2 GW IP Y2

  the goal is

  1. internet traffic through isps1

  2 VPN traffic (10.0.0.0 - 192.168.0.0) through ISP2

  OK, let's say VPN tunnel, NAT and so on... are all good, work expected.

  My question is can I configure route like below to achieve my objextive?

  Route 0.0.0.0 outside1 0.0.0.0 X 2

  Route outside2 192.168.0.0 255.255.0.0 Y2

  or only the public IP could be routing in external interface like this:

  Route 0.0.0.0 outside1 0.0.0.0 X 2

  Route outside2 z 255.255.255.248 Y2

  I hope your help, thank you!

  Yes, you certainly can, and your display configuration is correct.

  You must also configure the route for the address of peer VPN as follows:

  Route outside2 255.255.255.255 Y2