Configuration of firepower 5515 ASA

Hi all

Can someone help me to configure ASA 5515 with service of firepower.

1. the environment IPsec VPN deployment.

2. where to install the license of firepower.

3. how to integrate with FireSIGHT VMware server.

Thank you

Kamlesh

VPN traffic could be analized before encryption occur in the ASA, when you transfer the traffic to the module it supposed to be without any encryption and based on political access control you can perform any action on the traffic or the return traffic to the ASA and continue the process of encryption or build the VPN appliance of SourceFire.

Tags: Cisco Security

Similar Questions

  • I do not have "Firepower of ASA Configuration" menu in ASDM

    Hello

    I do not have "Firepower of ASA Configuration" menu in ASDM.

    I already configured IP to the management port 0/0 10.226.24.181 also to the 10.226.24.130 of the SFP Manager.

    I can ping 10.226.24.130 ASA CLI and have tab in ASDM (with https://No DC configured the button).

    You can see in attachment

    Help, please

    You have an ASA 5525 - X and the module of firepower is 5.3.1 - 152. To manage the power light module on that platform via ASDM requires the runtime current software 6.0 or later version (and your ASDM must be 7.5 (1.112) or later version).

    Reference: http://www.cisco.com/c/en/us/td/docs/security/asdm/7_5/release/notes/rn7...

    If you want to upgrade the module of 5.3 to 6.0 and you do not have fire power manager, then the way ahead is to reimage using the 6.0 system images and boot. This procedure is illustrated below:

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

    You need the images available here:

    https://software.Cisco.com/download/release.html?mdfid=286271172&flowid=...

    Expand the tree on the left and look under all versions 6.0 > 6.0.0. Use the files asasfr-5500 x-boot - 6.0.0 - 1005.img and asasfr-sys - 6.0.0 - 1005.pkg.

    After getting it to work, you should also update further the the latest version (currently 6.0.1).)

  • Factory default reset Module firepower in ASA

    Well, how do reset you factory default module of firepower in ASA

    Thank you! : D

    Hi LJ,.

    Yes you are right.

    Kind regards

    Aditya

    Please evaluate the useful messages.

  • The services configuration of firepower on Cisco asa 5506 with ASDM

    I have a few 5506 firewalls, and they are fully licensed with services of power, control, Protection, URL filtering, malware. I have intend running and configuration of all of this on the 5506 by ASDM. I was wondering if there are guides for a basic configuration and the implementation of policies available. Something to show a basic configuration which would technically begin inspection of traffic and work. Then I can edit and make changes to my taste.

    Thank you

    My recommendation to clients is to look at the Cisco Live, BRKSEC-2018presentation. Please refer to the 56 slide from for a good overview of how policies are installed in a module of firepower.

    There are also a number of other detailed guides available in the FireSIGHT Management Center product support page should you care to learn more about customization and operations. You can also find the series of videos of ASA FirePOWER on request to Labminutes.com useful to guide you on execution of operations of your system.

  • Flow of firepower of ASA

    Hi guys,.

    I noticed of Palo Alto and other sellers specify a much higher rate for their new generation compared to Cisco solution, when they make the full filtering URL, antivirus and anti-spam protection

    I think it's because they treat the package in parallel where ASA he treats one by a single module, is that correct?

    For example, ASA a past traffic to URL filtering, then Spam and then...

    Where as Palo Alto passes to the URL and SPam and... all at once so achieve a significantly higher flow rate.

    on this basis, it is correct to say that Cisco may not be the dealer in this area due to how they manage the firepower?

    I think the best way to address this issue is using NSS Labs reports. They publish an annual report which includes a chart to see how much you pay by protected Mbit/sec. Given that the supplier has published performance data are not always correct that you can watch their conclusions.

    I don't know if you're talking about absolute return (e.g. 7080 PAN vs FP9300), but in case you do I would say looking at the relative numbers and check what bitrate you lose by using for example the IPS.

    Architecture: hardware wise performance will always beat the software. FPGA used for specific loads occur always better than generic processors. Parallel processing is not something that each salesperson makes. Try to not get lost in the marketing of buzz and just analyze the performance counters and see how they compare when it comes to price - at the end of the day an architecture that results in better performance of 10%, but 100% higher price might not be what you're looking for.

  • Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

    Are the settings and policies of an ASA local with shattered fire or power of substitution to the addition of the device that will be managed by the management center of FireSIGHT? I have an ASA that works stand-alone with FP and now need to add FireSIGHT Defense Center/Management Center without losing existing policies.

    Thank you.

    Simply adding as successful will not overwrite the local policies of the firepower of the ASA module gave.

    However, as soon as you deploy any policy (access control, Intrusion, file), healthcare etc. Since FireSIGHT Management Center it will overwrite the one on the SAA.

    You can export one local by using the ASDM Manager and then import it into FireSIGHT for re-deployment as a management centrallly policy.

  • Example configuration for the TACCAS + ASA 8.22

    I'm looking for an example configuration to TACCAS + on 5.2 ACS with an ASA 8.2.2.

    Any help would be appreciated.

    I think the following should about do - but it is MUCH easier to do this in the GUI

    AAA-server protocol Ganymede GANYMEDE +.
    x.x.x.x host AAA-server GANYMEDE (management) key *.
    GANYMEDE LOCAL console for AAA of http authentication
    authentication AAA ssh console LOCAL GANYMEDE
    AAA authentication serial console LOCAL GANYMEDE
    Console to enable AAA authentication RADIUS LOCAL
    Console Telnet AAA authentication RADIUS LOCAL
    AAA accounting ssh console GANYMEDE
    Console Telnet accounting AAA GANYMEDE
    AAA accounting serial console GANYMEDE
    AAA accounting enable console GANYMEDE
    GANYMEDE AAA accounting command

    Remember that you must create the network device in ACS with the same shared key.

    Paul

  • Configure to integrate Cisco ASA and JOINT

    Hello

    We have Cisco ASA and JOINT, need assistance on the integration of the same thing; Please email me so that I'll share the details of the architecture.

    Thank you best regards &,.

    REDA

    Hi reda,.

    If I correctly your diagram, you do not want to send any traffic from the external switch to the JOINT with a SPAN port and all traffic from your DMZ interfaces with another.

    Is this correct?

    If so, can you tell me why you want to inspect the traffic before it goes through the firewall? As I said in my original answer, we generally advise putting IP addresses after the firewall.

    Not to mention that in your case, I guess that some traffic will be inspected twice so you will need to assign a different virtual sensors to each JOINT internal interfaces to ensure that the same instance does not see the traffic of several times.

    Kind regards

    Nicolas

  • Active/active failover configuration LAN-based PIX / ASA

    Hi all

    I would like to ask, if there is a restriction of length between the two ASA5510 in a LAN failover? Should not be, or I'm wrong?

    Thank you

    Norbert

    Hello

    normal duration of 100 m Ethernet. Or you can use the switches between them. I do not have a direct link.

    Best regards, Celio

  • ASA 5515 WITH LICENSE OF FIREPOWER

    Hello support team,

    We have configured cisco ASA 5515, firepower module added in it.

    Please give technical support to add L-ASA5515-TAMÁS = (Cisco IPS of firepower ASA5515, AMP, and Licenses of URL).

    @amalmichaelvj ,

    You are welcome.

    You can switch to FMC at any time. That one type of management can be used at a time given.

    FMC is supported by VMware (5.1 and 5.5), KVM and AWS. I would say that 95% or more of the facilities use VMware as the two platforms of the latter were just be presented earlier this year.

    You can find installation guides quick for all platforms supported here: http://www.cisco.com/c/en/us/support/security/defense-center-virtual-app...

    'Control' license free of charge (also known as "Protect + Control" is required for all the firepower of ASA modules.) Without it, you will not be able to deploy and enforce and other features (i.e., IPS, filtering URL or Advance Malware Protection features that are included in your license of TAMAS type).

  • CISCO ASA 5515 WITH THE VERSION OF FIREPOWER

    ASA 5515 service with the power of fire. Can be managed with ASDM firepower. ?

    Anyone suggests Versions for firepower, ASDM, ASA?

    Kindly help

    You will find it useful to install the Module of firepower on ASA for the management of the premises:

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

    Thank you

    Guillaume

    Rate if this can help!

  • ASA 5545 firepower question X

    Hi all

    I have an urgent matter, I bougth 2 ASAs 5545 x with firepower, both ASAs Sourcefire inside of the Flash, but only has the State upwards.

    When I run the show module command,

    ASA1

    ==========================================================================================

    ciscoasa # sh module

    Model serial number of map mod
    ---- -------------------------------------------- ------------------ -----------
    0 ASA 5545 - X with SW, GE 8 data, 1 GE Mgmt ASA5545 FCH19207Y7G
    IPS unknown n/a FCH19207Y7G
    cxsc unknown n/a FCH19207Y7G
    SFR unknown n/a FCH19207Y7G

    MAC mod Fw Sw Version Version Version Hw address range
    ---- --------------------------------- ------------ ------------ ---------------
    d8b1.9040.ba11 0 to d8b1.9040.ba1a 1.0 9,0000 8 2,0000 4
    IPS d8b1.9040.ba0f to d8b1.9040.ba0f / o
    cxsc d8b1.9040.ba0f to d8b1.9040.ba0f / o
    SFR d8b1.9040.ba0f to d8b1.9040.ba0f / o

    The Application name of the SSM status Version of the Application of SSM mod
    ---- ------------------------------ ---------------- --------------------------
    IPS unknown current Image number does not apply
    cxsc unknown No. current Image does not apply

    Data on the State of mod aircraft compatibility status
    ---- ------------------ --------------------- -------------
    0 to Sys does not apply
    IPS does not is not Applicable
    cxsc does not not Applicable
    SFR does not not Applicable

    Mod name license status time remaining license
    ---- -------------- --------------- ---------------
    IPS IPS Module perpetual mobility

    =================================================================================

    ASA2

    ==========================================================================================

    ciscoasa # sh module

    Model serial number of map mod
    ---- -------------------------------------------- ------------------ -----------
    0 ASA 5545 - X with SW, GE 8 data, 1 GE Mgmt ASA5545 FCH19207Y7G
    IPS unknown n/a FCH19207Y7G
    cxsc unknown n/a FCH19207Y7G
    SFR FirePOWER Services Software Module ASA5545 FCH19207Y7G

    MAC mod Fw Sw Version Version Version Hw address range
    ---- --------------------------------- ------------ ------------ ---------------
    d8b1.9040.ba11 0 to d8b1.9040.ba1a 1.0 9,0000 8 2,0000 4
    IPS d8b1.9040.ba0f to d8b1.9040.ba0f / o
    cxsc d8b1.9040.ba0f to d8b1.9040.ba0f / o
    SFR d8b1.9040.ba0f at d8b1.9040.ba0f s/o s/o 5.3.1 - 152

    The Application name of the SSM status Version of the Application of SSM mod
    ---- ------------------------------ ---------------- --------------------------
    IPS unknown current Image number does not apply
    cxsc unknown No. current Image does not apply
     SFR ASA FirePOWER Up 5.3.1 - 152

    Data on the State of mod aircraft compatibility status
    ---- ------------------ --------------------- -------------
    0 to Sys does not apply
    IPS does not is not Applicable
    cxsc does not not Applicable
    SFR Up Up

    Mod name license status time remaining license
    ---- -------------- --------------- ---------------
    IPS IPS Module perpetual mobility

    =================================================================================

    I tried these commands to retrieve the firewall

    SW-module module sfr recover configure image disk0:asasfr - 5500 x-boot - 5.3.1 - 152.img
    SW-module module sfr recover boot

    The threshold of State the same thing, but I can connect to the module of firepower through console session sfr.

    Please can you help me?

    If you started the recovery image, you have a partial installation. You need to go in the module with the command of session and launch the installation. Once you have a Setup "bootstrap" in place, you can complete the recovery process by installing the full image.

    Something like this:

     ciscoasa# session sfr console Opening console session with module sfr. Connected to module sfr. Escape sequence is 'CTRL-^X'. Cisco ASA SFR Boot Image 5.3.1 asasfr login: admin Password: Admin123

    Then run the installation program, followed by 'system install' to load the full image (pkg) package as follows:

     asasfr-boot> system install ftp://@/asasfr-sys-5.3.1-152.pkg Verifying Downloading Extracting Package Detail Description: Cisco ASA-SFR 5.3.1-152 System Install Requires reboot: Yes Do you want to continue with upgrade? [y]: Y Warning: Please do not interrupt the process or turn off the system. Doing so might leave system in unusable state. Upgrading Starting upgrade process... Populating new system image Reboot is required

    Once you reboot, the module of sfr should show that up to. You can then connect back (using admin / Sourcefire), accept the EULA, and end with the re-definition of addressing, and then adding the definition of a Manager.

  • Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

    Hello!

    I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

    ASA Version 9.1 (1)

    !

    ASA host name

    domain xxx.xx

    names of

    local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

    !

    interface GigabitEthernet0/0

    nameif inside

    security-level 100

    192.168.11.1 IP address 255.255.255.0

    !

    interface GigabitEthernet0/1

    Description Interface_to_VPN

    nameif outside

    security-level 0

    IP 111.222.333.444 255.255.255.240

    !

    interface GigabitEthernet0/2

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/3

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/4

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface Management0/0

    management only

    nameif management

    security-level 100

    192.168.5.1 IP address 255.255.255.0

    !

    passive FTP mode

    DNS server-group DefaultDNS

    www.ww domain name

    permit same-security-traffic intra-interface

    the object of the LAN network

    subnet 192.168.11.0 255.255.255.0

    LAN description

    network of the SSLVPN_POOL object

    255.255.255.0 subnet 192.168.12.0

    VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    management of MTU 1500

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 711.bin

    don't allow no asdm history

    ARP timeout 14400

    no permit-nonconnected arp

    NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

    Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

    Timeout xlate 03:00

    Pat-xlate timeout 0:00:30

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    WebVPN

    list of URLS no

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    AAA authentication http LOCAL console

    LOCAL AAA authorization exec

    Enable http server

    http 192.168.5.0 255.255.255.0 management

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

    Crypto ipsec pmtu aging infinite - the security association

    Crypto ca trustpoint ASDM_TrustPoint5

    Terminal registration

    E-mail [email protected] / * /

    name of the object CN = ASA

    address-IP 111.222.333.444

    Configure CRL

    Crypto ca trustpoint ASDM_TrustPoint6

    Terminal registration

    domain name full vpn.domain.com

    E-mail [email protected] / * /

    name of the object CN = vpn.domain.com

    address-IP 111.222.333.444

    pair of keys sslvpn

    Configure CRL

    trustpool crypto ca policy

    string encryption ca ASDM_TrustPoint6 certificates

    Telnet timeout 5

    SSH 192.168.11.0 255.255.255.0 inside

    SSH timeout 30

    Console timeout 0

    No ipv6-vpn-addr-assign aaa

    no local ipv6-vpn-addr-assign

    192.168.5.2 management - dhcpd addresses 192.168.5.254

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    SSL-trust outside ASDM_TrustPoint6 point

    WebVPN

    allow outside

    CSD image disk0:/csd_3.5.2008-k9.pkg

    AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    attributes of Group Policy DfltGrpPolicy

    Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

    internal VPN_CLIENT_POLICY group policy

    VPN_CLIENT_POLICY group policy attributes

    WINS server no

    value of server DNS 192.168.11.198

    VPN - 5 concurrent connections

    VPN-session-timeout 480

    client ssl-VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list VPN_CLIENT_ACL

    myComp.local value by default-field

    the address value VPN_CLIENT_POOL pools

    WebVPN

    activate AnyConnect ssl dtls

    AnyConnect Dungeon-Installer installed

    AnyConnect ssl keepalive 20

    time to generate a new key 30 AnyConnect ssl

    AnyConnect ssl generate a new method ssl key

    AnyConnect client of dpd-interval 30

    dpd-interval gateway AnyConnect 30

    AnyConnect dtls lzs compression

    AnyConnect modules value vpngina

    value of customization DfltCustomization

    internal IT_POLICY group policy

    IT_POLICY group policy attributes

    WINS server no

    value of server DNS 192.168.11.198

    VPN - connections 3

    VPN-session-timeout 120

    Protocol-tunnel-VPN-client ssl clientless ssl

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list VPN_CLIENT_ACL

    field default value societe.com

    the address value VPN_CLIENT_POOL pools

    WebVPN

    activate AnyConnect ssl dtls

    AnyConnect Dungeon-Installer installed

    AnyConnect ssl keepalive 20

    AnyConnect dtls lzs compression

    value of customization DfltCustomization

    username vpnuser password PA$ encrypted $WORD

    vpnuser username attributes

    VPN-group-policy VPN_CLIENT_POLICY

    type of remote access service

    Username vpnuser2 password PA$ encrypted $W

    username vpnuser2 attributes

    type of remote access service

    username admin password ADMINPA$ $ encrypted privilege 15

    VPN Tunnel-group type remote access

    General-attributes of VPN Tunnel-group

    address VPN_CLIENT_POOL pool

    Group Policy - by default-VPN_CLIENT_POLICY

    VPN Tunnel-group webvpn-attributes

    the aaa authentication certificate

    enable VPN_to_R group-alias

    type tunnel-group IT_PROFILE remote access

    attributes global-tunnel-group IT_PROFILE

    address VPN_CLIENT_POOL pool

    Group Policy - by default-IT_POLICY

    tunnel-group IT_PROFILE webvpn-attributes

    the aaa authentication certificate

    enable IT Group-alias

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    inspect the icmp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    : end

    Help me please! Thank you!

    Hello

    Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

    Thank you

    swap

  • Configuration of Cisco through ASDM firepower

    Hello

    I tried to configure Cisco Firepower URL filtering ASDM.

    However, I am trying to create access through ASDM strategy but I am confused about the next steps. Please find the attached screenshot.

    Where to go next?

    Concerning

    Vaibhav

    Hi vaibhav,

    You need not create the new access control policy. Modify the policy by default and then within this policy, create rules.

    access control strategy only 1 apply to the device at any given time.

    Inside access control strategy, you can create rules based on category or custom URL.

    Please read this article.

    http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...

    It is for firesight, but the rule creation process is the same in ASDM so.

    Rate if helps.

    Yogesh

  • LT2P configuration vpn cisco asa with the internet machine windows/mac issue

    Dear all,

    I have properly configured configuration vpn L2TP on asa 5510 with 8.0 (4) version of IOS.

    My internet does not work when I connect using the vpn. Even if I give power of attorney or dns or I remove the proxy

    It does not work. only the resources behind the firewall, I can access. I use the extended access list

    I tried also with the standard access list.

    Please please suggest what error might be.

    Thank you

    JV

    Split for L2TP over IPSec tunnel tunnel is not configured on the head end (ASA), it must be configured on the client itself, in accordance with the following Microsoft article:

    http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

Maybe you are looking for