Configuration of HR analytics questions?
HelloWe install Oracle BI Apps on GNU / LINUX. The installation phase is completed and we are about to launch a full load ETL. But we're confuded on various issues such as:
1. for a full load ETL under say to analytical HR set first as described in the install docc HR analytics. Is - this mandatory?
2. while I try to run the ETl the first task itself does not throw an error:
LOG FILE:
======
Running session... 'SIL_InsertRowInRunTable '.
Application to start the workflow: 'SIL_InsertRowInRunTable' completed with error code 2
Error message: the specified task name, workflow or folder does not exist.
Opportunity to order: pmcmd startworkflow u Administrator PEI * s - appsnet3.wipro.com:4006 f SILOS lpf - u03.01/DAC_LINUX/Informatica/parameters/input/SILOS. SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Workflow message:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [8.1.1 SP4], build [43.0817], LINUX 32-bit
Copyright (c) Informatica Corporation 1994-2007
All rights reserved.
Called to Thu Aug 28 14:00:27 2008
Connected to the Service of integration [appsnet3.wipro.com:4006]
ERROR: File [ELEVATORS] not found.
Disconnection of Service integration
Completed at Thu Aug 28 14:00:27 2008
=====================================
ERROR OUTPUT
=====================================
Notification of DAC: Task ' load Row in run table: SIL_InsertRowInRunTable "failed, and so the other tasks for this step will not be executed
=========================================================================
=========================================================================
It shows a few 'SILOS' missing folder. Can anyone please help on this.
3 are their integration measures that we must follow to integrationg OBIEE with EBS R12 suite?
Thanks in advance,
Soumya
Soumya salvation,
Yes, you will need to follow all the steps to set up HR analytics or EBS R12 as pdf. And you receive error message that the specified task name, workflow or folder is not. this problem is due to the incompatibility of the name of the folder in DAC client Informatica, you must mention the name of the DAC created in Informatica customer record, you restored the Oracle analytics company. RPD in Informatica. If this is not the case, the you must restore the Informatica repository.
If in doubt please return back.
Concerning
Norman John
Tags: Business Intelligence
Similar Questions
-
EMP Configurator - drop/recreate Tables Question
All,
The question regarding the EMP Configurator.
All products are deployed on the same schema (assumes that the SS, WORKSHOP, planning, HFM), and I would like to re - set up the schedule.
If I choose only the option "configure database" for planning only and then choose "delete and re-create the tables", which only decreases the HSP, or all tables in the schema? My gut tells me it will only drop the HSP paintings, but my past experiences told me that there is a high probability it will drop the entire schema.
Appreciate any idea
It should only remove system planning objects, if you are worried then make sure you have a backup or point to another schema.
See you soon
John
-
Deploy the Standard Configuration to multiple PCs question
Currently a problem setting to several Firefox installations deployment. After trying a few methods, it seems that user.js or similar js files is the way to go.
The user.js file is copied successfully for user profiles, but the settings do not take effect.
site list = "internaldomain.com,sctwsgateway.internaldomain.com:8080, door of entry: 8080, gateway: 8080.
Pref ("network.negotiate - auth.trusted - URIS","internaldomain.com,gateway.internaldomain.com:8080, door of entry: 8080, gateway: 8080).
Pref ("network.negotiate - auth.delegation - uris", list of sites);
Pref ("network.automatic - ntlm - auth.trusted - uris", list of sites);
Pref ("network.automatic - ntlm - auth.allow - no - name FQDN", true);
Pref ("network.automatic - ntlm - auth.allow - proxies", true);
Pref ("browser.shell.checkDefaultBrowser", false);InternalDomain.com is a substitution for our real estate
Sorry, I'm not a developer, just a tip Firefox user from 2002 with Phoenix 0.3. I have always used user_pref in user.js. And the original 'bible' for advanced users of Firefox - http://kb.mozillazine.org/User.js_file - shows user_pref as the syntax to use.
I suspect that pref is appropriate for a single file - https://developer.mozilla.org/en-US/Firefox/Enterprise_deployment - as indicated under Configuration mozilla.cfg in this article.
What I've learned through experience with user.js years is
With user.js when it is defective or invalid pref Firefox won't read the user.js file possible. above the defective prefs prefs will be read only. Usually you can figure out where Firefox stopped reading the user.js in displaying the prefs.js file in the profile folder. above the defective prefs prefs it will bring to prefs.js, but the faulty pref and those below will not be in the prefs.js file. I ran into that several times over the years where user.js doesn't seem to work or stopped work partially through the file. usually due to typo, I did. but also when there was a major change in Firefox that invalidated or disapproved a pref I used in a previous version.Also, what's up?
site list = "internaldomain.com,sctwsgateway.internaldomain.com:8080, door of entry: 8080, gateway: 8080";If it's in your user.js file, in the top - which resembles the defective pref, anything below that would be read.
-
Hi all
What is the difference between the first time launches and download completed under the Mobile section? Also how can you have more first launches of completed download time? Thank you.
See the tutorial Digital Publishing analytical Suite | Adobe Developer Connection for an explanation of all the declared values.
Neil
-
Dell power edge T620 configuration RAID and OS install Question
Hi all
Thank you for taking the time to read my post. My company recently bought a new server Dell T620 and I'm the one assigned to operate. Unfortunately, I do not have to configure a server with a RAID5 configuration.
My question is, I'm following the directions to Dell that says opening the lifecycle controller, select deploy the operating system. Where I'm stuck is to put the virtual disk. It's my first RAID configuration, and I think that the VD is what windows uses to read total disk space? We run 3 - 1 TB NLS 6.0gbps 7.2 k RPM.
I know 1 TB HARD drive to shows only 930 GB in windows. But for some reason any it offers me a virtual disk up to 1800 GB? I think I need to settle this at least can Go 930?
I can give more details if necessary. But currently, I am stuck on this part and will not go forward unless some.
Thanks in advance!
Hello acslacker
All you need to do is choose RAID 5, select the 3 disks and accept. It will automatically use all available space.
With discs hard 3x1TB the maximum available space will be approximately 2 TB. Some will disappear in the conversion to binary. It is announced that 930 GB instead of 1 TB. RAID 5 1 HARD drive is used for parity, then you will immediately lose 1 TB. This space will not appear in the usable space. The 1.8 to which it is automatically the list looks correct.
Thank you
-
Restart Powerconnect 6248 without disturbing the Configuration
I apologize in advance for the entry-level position and if that's the answer elsewhere, please point me in the right direction:
I inherited load on a network LAG / VLAN with a central 2-battery Dell switch Powerconnect 6248 functioning as a main switch and routing of traffic between the VLANs that are shared it resources.
I want to restart this switch without losing any configuration, because I'm just to enter this network, I don't want to disrupt or rebuild the configuration.
I can get Telnet or SSH access to the switch but now use the GUI. When I go to reboot I choose to restart the two batteries and am met with the message:
"The unit will restart with the startup configuration, not the running configuration. Do you want to continue? »
I had a contractor separate network restart the switch before and I don't know if it simply ignored the message and proceeded. I would like to be able to restart this switch without losing any configuration.
My question is, I'm ok to move forward through this error message? Or do I need to configure backup to restart? What is the best way to proceed with a simple reboot of two chimneys, while maintaining the current configuration.
Here is the procedure, I suggest you take.
-If the running configuration is operational and you want to keep on the switch, and then save it in the startup configuration.
-before to restart, save the configuration.
-Keep the battery restart.
You can then use this backup config as a reference in case something happens to the configuration of the switch. It's a good idea to take the habit of saving after all change config, before the updates of the firmware, reboot, etc.
Here is an article that will guide you through the commands to perform these actions.
Hope you find it useful.
-
Guys, I need to take your brain if you don't mind.
We have an application that connects to a specific server. Information on the server is configurable, but the user must do so within the application. The team wants to deploy the OTA application without having to ask the user to change the server or without having to configure themselves. My question is, you know in a way that we can make the configurable information so it changes when the user to install the application? Something similar to an .ini file that contains the information from the server and is installed with the application. Computer SCIENCE team will not have access to the code where they cannot recompile the application with the new server information. The ".ini" file would be the best option because the team would just need to change but I don't know if this is possible.
Thank you
There are a number of ways to do this, here are a few examples.
1. If you are installing using the Explorer and you use BlackBerry handheld software version 4.3.0 +, you can add attributes to your jad file.
How - to read the attributes of a JAD file programmatically
Article number: DB-006382. you may send to the user configuration information. The application could be tuned for an email malicious message (some object, body, etc.) and read the configuration information.
3. If the BlackBerry handheld computers have micro SD cards, the configuration information could be copied/stored/read the micro SD card.
-
Configure 1141n with 802.11n
Hello community,
Currently, I'm trying to set up a 1141n (AIR-AP1141N-E-K9) autonomous access point with 802.11n. When I configure the access point for no encryption or aes - ccm encryption I am not able to set up the parameters of speed of dot11n (max. 54 Mbps). In addition, documentation (data sheet, conf IOS guide, getting started) said that the ap has two interface for (dot11radio0) 2.4 GHz and 5 GHz (dot11radio1) radio. I am not able to configure the interface dot11radio1. I tried to reset the access point to the default configuration, but this makes no difference. Even with default conf I can't configure dot11n. My question is: what am I doing wrong? Can someone help me?
Concerning
Bastian
---------------------------------------------------------------------------------------------------------------------
Cisco IOS software, C1140 Software (C1140-K9W7-M), Version 12.4 (21a) JA1, RELEASE SOFTWARE (fc1)
processor of Cisco AIR-AP1141N-E-K9 (PowerPC405ex) (revision B0) with K 98294/32
768K bytes of memory.
Card processor ID FCZ1419W0LN
PowerPC405ex CPU at 586 Mhz, the 0x147E revision number
Last reset of tension
1 gigabit Ethernet interface
1 802.11 post<---->---->---------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname jug5128
!
enable secret 5<...>
!
AAA new-model
!
!
AAA rad_mac radius server group
ACCT-port of the server 10.1.111.33 auth-port 1812 1813
!
Group AAA authentication login default RADIUS
AAA authentication login auth_mac group rad_mac
Group AAA authorization exec default RADIUS
!
AAA - the id of the joint session
IP zentral - .jug .de domain name
!
!
dot11 syslog
dot11 vlan-name ADMIN vlan 119
dot11 vlan-name WLAN vlan 130
!
dot11 ssid junghans119
VLAN 119
open authentication
authentication-key wpa version2 management
WPA - psk ascii 7<...>
!
dot11 ssid junghans130
VLAN 130
open authentication
authentication-key wpa version2 management
WPA - psk ascii 7<...>
!
!
Crypto pki trustpoint TP-self-signed-3181710497
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3181710497
revocation checking no
rsakeypair TP-self-signed-3181710497
!
!
TP-self-signed-3181710497 crypto pki certificate chain
certificate self-signed 01
<...>
quit smoking
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
encryption mode vlan 130 ciphers aes - ccm
!
encryption mode vlan 119 ciphers aes - ccm!
SSID junghans119
!
SSID junghans130
!
gain of antenna 0
Base-1 speed, 0 2.0 5.5 11.0 6.0 12.0 9.0 18.0 24.0 36.0 48.0 54.0 m0. M1. M2. M3. M4. M8. M9. M10. M11. M12. M13. M14. M15.
root of station-role
!
interface Dot11Radio0.119
119 native encapsulation dot1Q
no ip route cache
Bridge-Group 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface Dot11Radio0.130
encapsulation dot1Q 130
no ip route cache
Bridge-Group 3
the bridge-group subscriber-loop-control 3
Bridge-Group 3 block-unknown-source
No source of bridge-Group 3-learning
No bridge Group 3 unicast-flooding
Bridge-group spanning 3-people with disabilities
!
interface GigabitEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
No keepalive
!
interface GigabitEthernet0.119
119 native encapsulation dot1Q
no ip route cache
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface GigabitEthernet0.130
encapsulation dot1Q 130
no ip route cache
Bridge-Group 3
No source of bridge-Group 3-learning
Bridge-group spanning 3-people with disabilities
!
interface BVI1
IP 10.1.119.92 255.255.255.0
no ip route cache
!
default IP gateway - 10.1.119.1
no ip address of the http server
IP http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
radius of the IP source-interface BVI1
test SNMP-Server RO community
not run cdp
local RADIUS server
!
format of server RADIUS attribute 32 include-in-access-req hour
RADIUS-server host 10.1.111.33 auth-port 1812 acct-port 1813 hits 7<...>
RADIUS vsa server send accounting
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
!
end---------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------
jug5128 (config) #interface dot11Radio?
<0-0>Number of Dot11Radio interface---------------------------------------------------------------------------------------------------------------------
According to the output you associate with MCS rates
"Current rate: m15.
You will not be able to achieve the full 300Mbps throughput until you enable the channel binding, but this is not recommended from the b/g networks because it would effectivly leaves you with only one channel of Alcan.
0-0> -
ASA 8.4 cleaning using Network Configuration and Service objects
Hello
As most of you know, firewall configurations can growth in order to be large and complex, making them difficult to understand and difficult to change.
I have a cleaning using network firewall configuration and Service objects and groups of objects running from 8.4 who I want to. This ASA (8.4) has over 30 Web Server VM deployed behind each with the same basic configuration: one to the outside inside the IP address and port mapping (x.x.x.x:ftp to y.y.y.y:ftp, etc.) by using the following well known ports: FTP, 80, 443, 3389.
Examples of my existing configuration:
network of the Y.Y.Y.Y_FTP object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service
network of the Y.Y.Y.Y_WWW object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp http http service
network of the Y.Y.Y.Y_HTTPS object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp 443 443 service
network of the Y.Y.Y.Y_RDP object
Home y.y.y.66
NAT (inside, outside) static service tcp 3389 3389 X.X.X.66
outside_in list extended access permit tcp any host y.y.y.66 eq ftp
outside_in list extended access permit tcp any host y.y.y.66 eq www
outside_in list extended access permit tcp any host y.y.y.66 eq 3389
outside_in list extended access permit tcp any host y.y.y.66 eq 443
The entries above for each port have to do whenever a new virtual machine is deployed behind the firewall.
Here's my ACE project and entered the object-group service to clean up configuration.
object-group service WWW_FTP
Description access FTP HTTP
the tcp destination eq ftp service object
the purpose of the tcp destination eq ftp service - data
the purpose of the service tcp destination eq www
object-group service WWW_FTP_RDP
Description access FTP RPD WWW
the tcp destination eq ftp service object
the purpose of the tcp destination eq ftp service - data
the purpose of the service tcp destination eq www
the destination eq 3389 tcp service object
object-group service WWW_FTP_RDP_SSH
Description access WWW RDP SSH FTP
the tcp destination eq ftp service object
the purpose of the tcp destination eq ftp service - data
the purpose of the service tcp destination eq www
the destination eq 443 tcp service object
the destination eq 3389 tcp service object
object-group service RDP_SSH
Access SSH RDP description
the destination eq 443 tcp service object
the destination eq 3389 tcp service object
object-group service RDP_SSH_FTP
Access SSH FTP RDP description
the destination eq 443 tcp service object
the destination eq 3389 tcp service object
the tcp destination eq ftp service object
the purpose of the tcp destination eq ftp service - data
object-group service RDP_FTP
Access FTP RDP description
the destination eq 3389 tcp service object
the tcp destination eq ftp service object
the purpose of the tcp destination eq ftp service - data
outside_in list extended access allowed object-group WWW_FTP_RPD any host Y.Y.Y.Y
outside_in list extended access allowed object-group WWW_FTP_RDP_SSH any host Y.Y.Y.Y
outside_in list extended access allowed object-group WWW_FTP any host Y.Y.Y.Y
outside_in list extended access allowed object-group RDP_FTP any host Y.Y.Y.Y
outside_in list extended access allowed object-group RDP_SSH_FTP any host Y.Y.Y.Y
outside_in list extended access allowed object-group RDP_SSH any host Y.Y.Y.Y
The challenge lies in the consolidation of the network object entries that follow into something more condensed as the entries in the object-group service.
network of the Y.Y.Y.Y_FTP object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service
network of the Y.Y.Y.Y_WWW object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp http http service
network of the Y.Y.Y.Y_HTTPS object
Home y.y.y.66
NAT (inside, outside) Static X.X.X.66 tcp 443 443 service
network of the Y.Y.Y.Y_RDP object
Home y.y.y.66
NAT (inside, outside) static service tcp 3389 3389 X.X.X.66
Any help is greatly appreciated!
Hello
I'm afraid that the only part of the configuration you can really change and make more condenced is configurations ACL using configurations different ' object-group ' .
Of course, you can also create a "object-group" for all servers that need the same ports open to further reduce the lines of actual configurations in the configuration of the CLI.
However,.
Regarding NAT configurations there is unfortunately no way to reduce the amount of required configurations if you use Static PAT (Port Forward) for servers. There is no way yet to ports in group for "nat" configurations.
My question is, you have public IP addresses less at your disposal compared with the amount of different servers in your network behind the ASA?
If you have a public IP address dedicated to each server in the network, then I suggest to use static NAT instead of static PAT. It's about the only way that the NAT configuration could be minimized.
-Jouni
-
PERC 6 / I foreign configuration
I have a Raid 5 running as usual, but add more space. When I added 3 new readers he invites me I have a foreign configuration.
My question is if I import the configuration or to erase the configuration I'll lose my existing good running raid.
Right. In VD MGMT, select controller, F2, foreign, clear. The new disks will then view under loan and you can create a new/separate with them or add them to your current table to decompress (if you are interested in the latter case, what size are the readers)?
-
You are able to read each question carefully to review before you start your first task? I don't know whether to click through 26 screens to see each question or figure it out in the begin block? Thank you
Ed
Yes, you can click around the review, as you can do on most VMware exams.
There is a school of thought that clicking through all the questions and take notes you if an item is a 'create' or 'admin', their organization and then clicking back to the beginning will save time to review.
There are a few problems with this:
-This excersise will take you 10-20 min. Since you have an average of 8 minutes per question, you give ~ two questions when you try this method.
-try to determine how long will take an item or if the item is a 'creation' or 'admin' question before trying the question in fact is not always possible. Many questions have troubleshooting components that aren't obvious until you try them. Some read as a matter of "admin" but actually need to create components on the fly. Some of the lists "create xxx" but that's actually a later configuration element and the question really is a "question of the admin".
-l' review is designed to take one at a time, in order. Items that can cause disruptions tend to go towards the end of the examination, the elements that improve the performance of review go near the front. The items that can interfere with other elements are carefully. A passage which does no favor.
Note that these points are all exams live-lab, not only VCAP5-DCA, and some points are more important in some reviews.
-
configurations with the domain members
I have a few closed configurations stored in the library that contains the virtual computers that are members of the domain (this is necessary because they have SQL server installed). When someone clones of the configuration of the workspace, and it deploys, they get an error message that says: there is no domain trust and they must open a session as long as local administrator, leave the area and then attach it again. I know it's because active directory does not have several instances of the same object.
Now, the SQL Server VM in the configuration was based on a model that was not a member of the domain. Sysprep was run to give it a unique ID, hostname and IP address. But sysprep does not work when deploying a configuration and you cannot change the host name of a computer that is running SQL Server without breaking the Forum anyway.
Someone suggested the deployment of a virtual domain with the enclosed configuration controller, but this DC would not be synchronized with our physical production, DCs and such deployment requires a lot of overhead.
Can you really not use multiple instances of a Setup enclosed if virtual machines are members of the domain?
Is your SQL VM need to be part of your production domain. We have a base library which is a domain controller for its domain, we then take this configuration and add a SQL Server and that capture to a new library. Because SQL server is configured to communicate with the internal DC at this configuration, we have never questions when there are several verified instances.
-
Hello friends,
I have a doubt about setting up calendars in DAC, I'm given by oracle configuration guide.
My question is that,
We have 4 types of calendars in oracle, which I set up and someone can give me the procedure to do this.
Can someone explain in detail
Thanks in advance.Please read s 3.1.4 in this guide, pg 36, on setting up calendars
Oracle® Business Intelligence Applications
Configuration for Informatica PowerCenter users guide
Version 7.9.6.1
E14844-01 -
I installed 11.1.2 on Windows 64 bit environment and configured.
This is my environment:
Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
Box 2. Planning. Installation and configuration was successful.
Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
Trobleshooting:
When executing netstat, 8300 does not run on this box.
Also configured to 'Manage the clusters of planning' with no luck.
The WebLogic (11g) server indicated State planning is unknown.
Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
Journal of planning does not reveal the error messages.
EMP system log shows ServletContainerAdapter manager not initialized successfully
There is no error in start-HyS9Planning - out .log.
Start-HyS9Planning - error.log shows the requested service has already been started.
There is an error in the validation log:
[2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
java.lang.Exception: java.net.ConnectException: connection refused: connect
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
Caused by: java.net.ConnectException: connection refused: connect
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
at sun.net.www.http.HttpClient.New (HttpClient.java:306)
at sun.net.www.http.HttpClient.New (HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
... 21 more
]]
What am I not doing?
Thanks for your help in advance!
Published by: VenuRamini on October 6, 2010 07:25
Published by: VenuRamini on October 6, 2010 07:35Make sure that the Weblogic password is correct in the boot.properties and restart the services.
Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\
\security\boot.properties For example,.
For APS:
D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. PropertiesFor Regional service:
D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. PropertiesHTH-
Jasmine. -
Portals events are not load in the tables of database Analytics
Database ASFACT (ASFACT_PAGEVIEWS, ASFACT_PORLETVIEW) analytical tables are not get filled with data.
Tried diagnostic solutions:
-Check the configuration of analytics in configuration manager, select Analytics Communication option checked
-Events Portal registered during the installation of Analytics
-Check that the UDP events are sent from the Portal: Test: OK
-Reinstalled analytical component of Interaction
All entries were highly appreciated.
See you soon,.
Sandeep
----------------------------------------------------
In collector.log, find the exception:
----------------------------------------------------
July 8, 2010 07:12:54, PageViewHandler of ERROR 613 - not able to retrieve user: com.plumtree.analytics.collector.exception.DimensionManagerException: could not insert dimension in the database
com.plumtree.analytics.collector.exception.DimensionManagerException: not able to insert in the database dimension
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:271)
at com.plumtree.analytics.collector.cache.DimensionManager.manageDBImage(DimensionManager.java:139)
at com.plumtree.analytics.collector.cache.DimensionManager.handleNewDimension(DimensionManager.java:85)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.insertDimension(BaseEventHandler.java:63)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.getUser(BaseEventHandler.java:198)
at com.plumtree.analytics.collector.eventhandler.PageViewHandler.handle(PageViewHandler.java:71)
at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
Caused by: org.hibernate.MappingException: unknown entity: com.plumtree.analytics.core.persist.BaseCustomEventDimension$ $BeanGeneratorByCGLIB$ $6a0493c4
at org.hibernate.impl.SessionFactoryImpl.getEntityPersister(SessionFactoryImpl.java:569)
at org.hibernate.impl.SessionImpl.getEntityPersister(SessionImpl.java:1086)
at org.hibernate.event.def.AbstractSaveEventListener.saveWithGeneratedId(AbstractSaveEventListener.java:83)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.saveWithGeneratedOrRequestedId(DefaultSaveOrUpdateEventListener.java:184)
at org.hibernate.event.def.DefaultSaveEventListener.saveWithGeneratedOrRequestedId(DefaultSaveEventListener.java:33)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.entityIsTransient(DefaultSaveOrUpdateEventListener.java:173)
at org.hibernate.event.def.DefaultSaveEventListener.performSaveOrUpdate(DefaultSaveEventListener.java:27)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.onSaveOrUpdate(DefaultSaveOrUpdateEventListener.java:69)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:481)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:476)
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:266)
... 7 more
---------------------------------------------------------------
In analyticsui.log, we find the exception below:
---------------------------------------------------------------
July 8, 2010 06:50:25, Configuration of 910 ERROR - could not compile the mapping document
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$ $BeanGeneratorByCGLIB$ $6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main (Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
July 8, 2010 06:50:25, Configuration of ERROR 915 - couldn't set up XML data store
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$ $BeanGeneratorByCGLIB$ $6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main (Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
---------------------------------------------------
wrapper_collector.log
---------------------------------------------------
INFO | JVM 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.eventhandler.PortletViewHandler.handle(PortletViewHandler.java:46)
INFO | JVM 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
INFO | JVM 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
INFO | JVM 1 | 2009/11/10 17:25:22 | Caused by: java.sql.SQLException: [plumtree] [Oracle JDBC Driver] [Oracle] ORA-00001: unique constraint (ANALYTICSDBUSER. IX_USERBYUSERID) violated
INFO | JVM 1 | 2009/11/10 17:25:22 |
INFO | JVM 1 | 2009/11/10 17:25:22 | at com.plumtree.jdbc.base.BaseExceptions.createException (unknown Source)Key words of the msg of error suggests relocation of Analytics is necessary to solve this problem. Database Analytics does not get updated with the correct event mapping and this is why no data is inserted.
'Could enter no dimension in the database',
"Setup ERROR - not able to configure XML data store.
"org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$ $BeanGeneratorByCGLIB$ $6a896b0d.«ORA-00001: unique constraint (ANALYTICSDBUSER.» IX_USERBYUSERID) violated. "
"Setup ERROR - could not compile the mapping document.
Maybe you are looking for
-
How can I update video driver Tecra A2 OpenGL 1.1 to 1.3?
I'm trying to run some software of astronomy on my Tecra A2 but it says that the video driver is OpenGL 1.1 and requires at least OpenGL 1.3.What this means and how can I get an updated driver if you please.
-
DRM activator application has stopped working
play the games of big fish and a few weeks ago drmactivator application has stopped working shows up as a message and I can not play all games except those supplied with the computer - how can I fix this problem
-
27xi and web printing does not work with Firefox
I just bought this HP 27xi monitor to Costco and thinking about buying another soon. I use Firefox and went to print this web page I printed before using my HP monitor HP desktop computers and smaller and had no problem. Last night, I try to print to
-
BlackBerry smartphone how to control when desktop emails are forwarded to the Blackberry?
I am a new user... BB has the same e-mail address as desktop. All office emails automatically to my BB. I want to stop this automatic function and IF I want the emails to go to the BB then I turn it on. In general, I'll go a few weeks without checkin
-
Cannot send Messages in the other e-mail account in the Mail of Microsoft Surface app
I'm trying to set up a different e-mail account on my PC of Microsoft Surface in the Mail application. Initially, I got the message ' to use this account, you must install a digital certificate on this pc... ». I managed to fix that by disabling th