Configuration of SSL connection

Similar Questions

• Failed to configure Acrobat to connect to LiveCycle RM due to the SSL protocol error

  I get the following error when I try and configure Acrobat to connect to the LiveCycle RM server.

  Unable to connect to the service at the: < host > https://: 443

  SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. If the problem persists, contact an administrator.

  When I configure SSL on JBOSS, we used a certificate self-signed using the keytool JDK.  I can confirm that SSL is correctly configured on JBOSS.   Type < host > https://: 443 in a browser that brings me to the JBOSS page.  Also https:// < host >: 443/edc opens the user interface rights mgmt.

  This means, I won't be able to test without a real cert of a like Entrust certification authority?

  Also, what is the name of user and password in the settings menu?  Is a login in livecycle?  or for the cert?

  You must ensure that the host (443https://) is the same as the one you specified when you created the keystore. Do not use localhost.

  Jasmine

• The server does not support an SSL connection to a Hotmail account

  Original title: the server does not support

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Your Hotmail account is configured in Windows mail or Windows Live Mail. Yes?
  If the school is "none"... ignore the rest of my answer.

  If so,.

  Open Windows mail > tools > accounts > click your hotmail account > properties > advanced. Under outgoing (SMTP) Mail, change the port # 25 to 587 > click OK

  see if it's ok now by sending a test message to yourself.

  t-4-2

• vmcli fails with SSL connection error against iDRAC 2.40.40.40

  Hello community,

  We recently received a handful of new servers to R730XD, bringing the iDRAC 2.40.40.40 firmware revision.

  So far, we have been using vmcli for the Assembly of a local iso file during deployment - but now vmcli fails with "error: SSL connection error. It seems to relate to the firmware version iDRAC 2.30.30.30 works very well, while 2.40.40.40 fails with above mentioned error.

  Anyone who has experienced - and ideas for the resolution/workaround?

  / Hans

  To idrac, under iDRAC settings > network > Services and try to change the configuration of tls 1.1 to 1.0

• WebLogic: Deployed remotely using the SSL connection

  I want to deploy MyApp.war on AdminServer is that SSL is enabled. The configuration is the following:

  Machine M1	Machine M2
  AdminServer run here	Deployment script
  	MyApp.war - application to deploy war file

  Deployment using WLST as follows:

  progress = deploy (appName = 'MyApp', path = has: \Work Progress\WLSTScripts\WLST Deploy\MyApp.war' distance = 'true', download = 'true')

  This operation fails with the following error:

  wls: / Trinity_Testing_JDK7/edit! > progress = deploy (appName = 'MyApp', path = has: \Work Progress\WLSTScripts\WLST Deploy\MyApp.war' distance = 'true', download = 'true')

  Deployment of application of D:\Work Progress\WLSTScripts\WLST Deploy\MyApp.war targets (upload = true)...

  < 12 February 2015 15:09:30 IST > < Info > < deployment J2EE SPI > < BEA-260121 > < Initiating deployment operation for the MyApp application [archive: D:\Work Progress\WLSTScripts\WLST Deploy\MyApp.war], to AdminServer. >

  You have an editing session underway, where WLST will not block for your deployment complete.

  Has started the deployment of the Application. Please see the object returned WLSTProgress or the LAST variable to track the status.

  wls: / Trinity_Testing_JDK7/edit! > Print progress.getMessage)

  weblogic.deploy.api.spi.exceptions.ServerConnectionException: [SPI: J2EE deployment 260041] failed to load 'D:\Work Progress\WLSTScripts\WLST Deploy\MyApp.war' at ' t3s: / / M2:7002'

  wls: / Trinity_Testing_JDK7/edit! > Print progress.printStatus)

  Current status of your deployment:

  Command type of deployment: deployment

  Deployment status: failed

  Deployment message: weblogic.deploy.api.spi.exceptions.ServerConnectionException: [SPI: J2EE deployment 260041]unable to load 'D:\Work Progress\WLSTScripts\WLST Deploy\MyApp.war' at ' t3s: / / M2:7002'

  None

  Error message in the server log:

  < 12 February 2015 15:05:28 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  "< 12 February 2015 15:10:31 IST > < WARNING > < DeploymentService > < BEA-290070 > < deployment servlet service encountered an exception during parsing of multipart/form-data request:

  Publish

  wl_request_type:app_upload,

  wl_upload_application_name: MyApp.

  Content-Type: multipart/form-data; Boundary = - 7d01b33320494.

  ". Exception: "multipart/form-data request processing failed. Read timed out ". >

  < 12 February 2015 15:16:59 IST > < WARNING > < DeploymentService > < BEA-290071 > < deployment service servlet failed on the analysis of the request or by downloading the file. >
  
  

  FYI - Action in the error code - BEA-290071 said: "the demand should be RFC 1867 compliant."

  How to solve this problem?
  How can I apply the RFC 1867 compliant when the actual query is not created by me?

  The deploy command is improper; lack of some configuration settings?

  The solution is to assign to the property system - Dweblogic.deploy.UploadLargeFile = true when starting the client WLST. Then, any size file gets uploaded to the server even with the SSL connection.

  I confirmed this problem and solution on two different weblogic configurations and it worked. If anyone knows a similar problem, they can try it.

• 2nd Server IaaS - SSL connection refused.

  Everyone

  I installed a Distributed vCAC pile behind a load balancer.  I've successfully installed the environment but I'm having a problem with the

  2nd Server IaaS.  It's the server without Model Manager and only the Web site component.  With the 1 Server IaaS upward, I am able to

  access the portal.  When I bring the 2nd IaaS I make an SSL connection refused, thia is only happens on the 2nd IaaS.

  Has anyone seen this problem?

  Can you join the newspaper except that you get.

  There could be lots of things, most likely the second server IaaS does not approve the IaaS certificate you configured. Most likely, it happens when he tries to access the Data /Repository. service Did you follow the installation steps when you deploy the IaaS shild (point 15 - if you install components additional Web site behind a load balancer, do not generate self-signed certificates.) Import the IaaS Webservers main certificate form to ensure that you use the same certificate on all servers behind the load balancer. )

  vCloud Documentation Center Automation

• Change the SSL connection on the Server VMware - what customers?

  Hello

  I currently have Mirage Horizon 4.2.3 installed and I use NO SSL. Server is available only for users within the local network.

  I would change it and this server on the internet for the users will be able to backup data during a move and I'll be able to get diapers for them.

  All guests of Mirage are pointing to the internal address of Mirage.

  My questions are:

  -If I change server settings will be I lost the connection to the LAN clients or I'll go 'extra' access via https?

  -is it possible to make clients to use SSL connection without re-installing the agent of Mirage?

  -I can do it without full re-synchronization of data?

  [Thanks for the replies and suggestions:]

  Once you have changed the configuration of SSL for a server of Mirage, customers also has need to use SSL for connects to the server, otherwise the connection will not be established.

  You can change the settings of the Mirage customer without reinstallation:

  -In Windows, the tray icon, open the status of Mirage, CTRL + ALT + S, a new window to set up the client must open and then check the Option 'use SSL Transport'

  OR

  -Edit the Wanova.Desktop.service.exe.config file and change the 'useSslTransport' for real 'touch' and then restart the service Wanova Mirage

  Full re-synchronization of data should not be necessary, as endpoint and always the same agent

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Between R2 2012 Windows and IBM Http Server SSL connection failed periodically.

  Hi, I have a problem recently. I found that my windows server 2012 R2 has sometimes failed to connect with IBM Http Server ssl. Here it is the information of the two servers:

  1 windows 2012 R2

  -Already activate TLS 1.2 and TLS 1.0

  -Already the latest version of windows update and restart

  IIS - 8.5

  2 IBM Http Server

  -Apache 2.2.31

  -using OpenSSL 1.0.2f

  -Allow TLS1.2 and TLS 1.0

  I also captured network traffic when the two server. If the ssl connection has managed to create. Traffic will be like the following screen:

  

  If the ssl connection was impossible to create, network traffic was like the below:

  

  You will see that the ssl connection failed when the version of the TLS protocol was passed to TLSv1. And returned access denied.  The details of the access denied was like the below:

  

  As the captured screen reproduced above, you will see that the SSL for Client Hello was TLSv1.2 but running on the recording layer TLSv1. this Hello customer was sent by the server r2 windows 2012. I don't know why the ssl connection has been passed to TLSv1 suddenly.

  I found that Microsoft has released an update on January 12, 2016. This fix is the resumption of SSL. Update ID was 3109853 , but I have already applied this update on my server. I tried to do the with the other type of server ssl connection, the ssl connection is possible in a stable condition and has happened the problem I mentioned. Is there someone met this case and resolve it finally?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• You don't have enough privileges for the configuration of the connection properties. Contact your administrator

  When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.

  We have solved the problem yesterday, by simply reinstalling the Aventail software.

  I spoke to network administrators and nothing had changed, so it's quite strange.

  anyway thanks a lot for your help Brian.

  See you soon,.

  Tobias

• imposible to send email no ssl connection

  Hello

  I can't send e-mail while I get

  Message: no connection smtp.bbox.fr or the computer can support ssl connection.

  Mreci in advance for your help

  Hello

  You posted on a forum for English language. Please choose your preferred language in the link at the bottom of this page.   English

  http://answers.microsoft.com/en-us/windows/forum/ecoms?

  Also, you can select other regions and languages here:

  http://support.Microsoft.com/common/international.aspx

  Don

  - - - - -

  [French]

  Hello
  You posted on a Spanish-language forum. Please select your language from the link at the bottom of this page.   English
  http://answers.microsoft.com/en-us/windows/forum/ecoms?

  You can also select other regions and languages here:

  http://support.Microsoft.com/common/international.aspx

• The device or resource (127.0.0.1) is not configured to accept connections on port "The World Wide Web (HTTP) service".

  Hello

  I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".
  Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• "Windows cannot configure this wireless connection".

  I (birthday gift) a laptop Dell Inspiron 1011 with Windows XP Home Edition.  It has a "Dell Wireless 1397 WLAN Mini Card".  It works wirelessly at home but when far and try using WiFi access points, if I am looking for available networks, it comes up with "Windows cannot configure this wireless connection".  (She also comes up with this message at home if I search for the network, but works OK on everything that I established House).  I searched online and found a "fix" of Microsoft, but when I tried to use a time warning that "this type of file can harm my computer" so I gave up.

  Another area, I looked explained that the software other than Windows ensured control WiFi and it was not recommended to disable it.  (No doubt, it was the Dell software?)

  I'm very PC not literate and would appreciate any help very simple!

  Hi sligo123

  You can find this a bit confusing link.  I suggest that you enable the automatic configuration service (service Windows uses to control the wireless, rather than the Dell software).  Heres how:

  1. click on start, then run

  2. in the box, type C:/Windows\system32\services.msc/s

  3. click on OK

  4. in the window that appears, you should have a full range of services, scroll down until you find Windows Zero Configuration - double click on it

  5. in the box, make sure that the automatic option is selected in the drop-down list box.  Then click on the Start button.

  Try and then try to connect to the wireless network (you may have to connect to your home network)

  If this does not help, please post back here and we can try something else.

  Kind regards

  Daniel

  Profession: IT Administator for a small UK company | Level of Expertise: intermediate (self-taught)

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.