Configuration of test and Dev choose between servers

Similar Questions

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• Clone Test and Dev Environment on the same machine

  I have PROD environment clone on a new computer, DEVX, inside the DEVX machine I install other EbS12 for TEST with other ports, any service running on the right, but after that I want to run "adadmin", he throws me the following error:
  
  Error of Administration AD:
  C_TS error opening cursor
  Error calling aicdtabBuildTablespacesCache()
  
  I have /etc/oraInst.loc
  inventory_loc = / apps/oracle/DEVX/inst.
  
  and the oratab
  DEVX:/apps/Oracle/DEVX/DB/tech_st/11.1.0:N
  
  What can I do to install the other proceeding properly within the DEVX machine?

  Salvation;

  Please check below note that point a similar problem like yours

  Error starting adpatch or adadmin after upgrade to 8i 9i [301508.1 ID]

  It may be useful

  Respect of
  HELIOS

• Easy way to pass a test and remote servers?

  This seems to be such a fundamental issue, but the answers that I can find that is to ignore the basic of the local or are the years (and versions) obsolete.

  Simple form: I have a website and want to put the updated files to the test site until they are ready, then put them to the live remote location. Pretty standard workflow. What is better, easier and more 'bio' how to do it?

  Right now, I have two definitions of servers, which are the same, except that a tip to the root of the site host ("remote/live") and one points to a system directory /TEST/ off the coast of the root of the host. The test is controlled permanently 'test '. The remote is verified either 'remotely' or not. If the remote control is checked, put all go to the live site. Unchecked, is go to the test site.

  What is the only way to direct downloads?

  Y at - it's not simpler and more direct toggle the UI to choose test/live? Go to the Server Management menu to switch?

  And what would be the use of control both test and live on the same server - in other words, if I use the only method to choose the destination, would it not wiser to a toggle between the two, instead of a zero or two?

  I feel I'm missing really something here...

  Use the files Panel developed.  See screenshot.

  

  You should see 2 icons of connection.  One is for the outside and the other to the testing server.   That said, I have a local test server (Wamp) installed on my local disk.  If your mileage may vary.

  Nancy O.

• Sector of best Documents to also have bodies like DEV, TEST, and CERT

  We know that when the Oracle Applications is installed in one company other than PROD its always better to have multiple instances installed with it as DEV, TEST, and CERT to the test user development and certification end with access restricted.
  
  Is there a documentation or the best sectoral documents that mentions the need of these environments in the Oracle implementation and the role each approx...

  Hello

  There is a new document as part of our configuration management activities available here .

  Refer to the section of the white paper, the document "management of Configuration software e-Business Suite - environmental management.

  If you are not an employee of the Oracle, I need your email address to send it to you.

  Best regards
  [email protected]

• WHERE to choose between 2.4 and 5 GHz on wnr1000v3

  Hello

  I'm trying to find:

  WHERE to choose between 2.4 and 5 GHz on a wnr1000v3...?

  There same 5 GHz option...?

  Thank you!

  Nope. It is only 2.4 GHz.

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• Choose between gtx970 and 780ti at the same price - especially for first pro (no game)

  I must choose between (new) gtx970 and 780ti (second hand a friend, he buyed it but never mounted or even he unboxed) specially for first pro / some aEffets and PShop (it's the working pc, no game... too )

  Both are at the same price-

  360 eur 970 gtx

  780ti gtx 355 euros

  Read the card (cudacores, bandwiths, etc.), it seems easy to choose the 780ti especially because this isn't for the games, but I'm not professional equipment, then maybe you could give me some advice... I'm edition 4 videos k short (10 minutes or more) almost future and im worried about the 'old' technology 780ti could have some limitation with it

  I like to work with my new baby - i7 5820 k - 32 GB ddr4 2400-128 GB ssd for the OS - ssd 256 GB for editing - 2 TB hdd 7200 RPM - and an old gt440 from nvidia... for now...

  I hope you can help me with this last choice

  Thank you very much in advance...

  A 980Ti would be the best choice, and around the same way as a black Titan on this basis.

  Eric

  ADK

• I've conquered by a windows version of first and photoshop elements without being able to choose between windows and mac - is it possible to reverse this trend, or switch to a mac version?, sold a windows version of the software for mac

  Hi, I bought a copy in the first line and Photoshop Elements bundle earlier today, and they gave me the version of Windows. I use a Mac and he had no choice given to choose between the two operating systems. I had seen elsewhere on the site that it was possible to get it on a BONE, so is it possible of is not the product of the version of Windows has opted for the Mac version or get a refund? The order has not taken on my bank account yet, so I'd rather have done before

  Hello

  This link might help: a product for another language or version of trading platform

  Kind regards

  Sheena

• Can I save between a test and the stand alone version?

  Can I save between a test and the stand alone version?

  You're right, the CC version is activated with your Adobe ID and password once you have signed up for the plan of creative cloud. You can uninstall this CC version and install the standalone version. It of the same program and opens the same catalog. You don't need to save anything. Simply move to the standalone version and start Lightroom. Everything will work out just the same6.

• Live migration between servers Intel Xeon E5410 and Intel Xeon E5506?

  Hello.

  Is it possible to run the dynamic migration between servers Intel Xeon E5410 and Intel Xeon E5506 processor?

  Both servers are running ESX 4.0

  Try to migrate will cause an error as UC and hostbitys do not match.

  I; m impossible and VCA (like a Core2 family and another family of Core i7).

  I don't mind to give up a part of the 'new feature' the Core i7.

  Thank you

  Zeevik.

  > I; m impossible and VCA (like a Core2 family and another family of Core i7).

  You must turn off all the virtual machines on the host with 55xx Xeons before turning on the VCA.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Why the PS and SG asking me to choose between buying the product or a 30 day trial?

  I have the annual subscription of creative cloud and I downloaded several applications like Photoshop, Premiere Pro, and SpeedGrade.

  However, when I start Photoshop and SpeedGrade, I had to choose between buying the product or sign up for a 30 day trial.

  Anyone who knows why?

  This should help: http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

• DataGuard - choose between Modes

  Setting up ORACLE DATAGAURD, how to choose between Max Protection, Max availability and Performance Max.

  Based on what factors, these are determined

  Hello

  you have three options

  Performance of Max is a Mode of ALL

  Availability of Max is a SYNCHRONIZATION Mode

  Max Protection is also a SYNC Mode,

  For Max Availabilty and Max Protection, you need to configure standby Redo Logs.

  For most of the cases the availability of Max in Data Guard Mode is very good.

  Max Protection is very critical, while if you can reach the data base can be while the network has a failure or bad weather of latency from the primary database will stop.

  Then also take a look at MOS: TRANSPORT: Modes of Data Protection Guard (Doc ID 239100.1)

  So, what are the requirements of your project and look at your infrastructure?

  concerning

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• Support/best practices to restore the application of planning between servers

  I have two servers with Hyperion Planning 9.3.1 (prod and dev) I want to copy the application called "BFS" Production of "NewBFS" - Dev server.
  
  As directed by our consultants, they said to do the following:
  
  1. backup the repository database that contains the application production BFS
  2 do a restore of the .bak file to "NewBFS" on the dev server database
  3. resync orphaned connections (from sql server connections and database connections)
  4 Ouvrezunesession planning via the default admin user ID
  5. go in the app's settings and change the URL
  6 enter the Shared Services URL
  7 manage the database
  8 check all the boxes and click Refresh
  9 go to SSP and resynchronize the native directory users
  
  However then try to connect in planning with something other than «admin", we receive an error «user xx is not configured...» »
  
  From my experience of db user tables are either still referencing production and/or do not have resynced correctly.
  
  If long story short... I can restore a planning application to another server, and if so what is the supported/best practices?
  
  Thank you
  
  JTS

  It is in the hyperion\planning\bin directory.

  Use :-updateusers.cmd serverName adminName password applicationName

  See you soon

  John
  http://John-Goodwin.blogspot.com/