HP Envy 4501: HP Envy 4501 prints Page name

Similar Questions

• ENVY 5530: Print scanned pages is so slow!

  Hello world!

  My name is Flavio.

  I just bought an inkjet Envy 5530 and I really like it so far. But what happens is when I try to print pages that have been previously analysed and have some sort of texture in white (not pure white), printing is so slow, perhaps, it prints a half inch at a time, stops for 4 or 5 seconds and then print one more inch... it takes about 3 minutes to print one page...

  Is this supposed to happen with the inkjet printers?

  I know that with lasers, of course it is much faster, but I didn't know that the printers ink jet could be so slow!

  I think it has something to do with the White is not not totally white.

  Any help?

  Thank you!

  Hi @flaviolira123 ,

  Who would certainly slow printing down. The printer would take time put in detail in print.

  If it happened to other types of documents, I'd be a little worried.

  Have you tried printing in draft mode?

  Have you tried only shades of gray, black ink mode?

• HP Envy 110 prints all black Page

  HP Envy 110 prints a black whole page.  The image is a .jpg of text only file. Print black text on a white background. But only prints a solid black page.

  Hello colette_bate,

  Welcome to the HP Forums!

  I understand your desire to 110 prints the whole page black. I will do my best to help you! First of all, I need to know your operating system on your computer? Windows or Mac?

  I recommend the continuation of this entire HP document on troubleshooting problems of quality Print. Try to print a page of diagnosis of your printer and let me know if you see missing colors. If you do, then please try to clean the cartridges, that is shown on this document. You can try to perform this step several times until you receive a satisfactory quality.

  Please post your results, I will be looking forward to hear from your part have a good night!

• HP ENVY 4500 only partially printing pages

  Bought the printer today and after installation according to the instructions.  Decided to report situation printer sheet bu this spell partially printed - a few lines showing only half top of letters and numbers.

  Tried to clean the printheads as well but no joy.

  Tried out the ink cartridges and reset then a them Algn printer page it still only partially printed.

  Checked ink levels and they were all full juice.

  Impression I tried an email and once again that some parts of the lines have been printed.

  Just to say that left printer off for the night and this morning when I did Printer Status Report it printed perfectly.

  Problem solved

• HP Envy 4500: Print jobs disappear from the print queue and not print (Windows 7).

  I just bought a HP Envy 4500 printer,

  When you attempt to print from a PC with windows 7 OS home pro (64-bit), the print job appears in the queue and then disappears, but the printer does not print anything.

  Everything else seems to work very well know

  • The printer prints the internal test page
  • The printer does print when you use iPad2
  • The printer does print when you use ePrint
  • The PC recognizes and communicates with the printer (tried with USB connections and wireless)
  • Analysis feature works very well - when initiated from the PC and printer

  I tried

  • uninstalling and reinstalling the software (several times using software from different sources)
  • restart the printer queue service
  • Disabling the firewall
  • running printing HP and doctor Scan
  • following the instructions described here (the question is the same but the different operating system):

  Print jobs disappear from the print queue and print (Windows 8)

  • combinations of all of the above

  Absolutely no joy in any of them, and in spite of more than 2 hours of research on Google and forums search I can't find a solution.

  HP... can you give me a solution or is that goes back to the shop?

  Well I finally worked on the fix myself by trial and error.  I changed the security settings for 'All' and 'Creator owner' to 'Print' and "Administer Documents".  Why on earth they were not automatically allowed as part of the installation, I couldn't really say.

  Hope this helps someone else with a similar problem.

• want to 5660: Hp envy 5660 print size

  HP Envy 5660 printer prints everything too big.  document do not match the page. Help?

  Hello

  Thank you for using the HP Forums.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5660-e-all-in-one-printer-series/6809225/model/6809226#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  What application you are using when you saw the question?

  Hope that helps.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Envy 5540: 5540 HP envy not printing

  I just bought a HP ENVY 5540 printer.  I spent almost 7 hours trying to get this setup of the printer.  The wireless to the printer light is solid.  I tried everything to get this printer to print.  Printing failure rises.  But I can print test HP page.  Someone at - it similar problems with the 5540 envy?

  Hello

  Thank you for using the forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• HP Envy 27: Printer does not finish the print job

  Computer is HP Envy 27. Have a for printer HP Officejet Pro 8600 wireless connection. Have old ACER desktop also wireless to the same printer. Print jobs larger than 3 pages, the old ACER works very well, but envy does not. The printer stops after only 3 or 4 or 5 printed pages. Sometimes I hear a small beep in the printer when the printer stops printing. Also the desire does not eliminate the queue when the print job is finished. Entered in the configuration advanced on the computer for printing options and checked to see if that option (not playoff jobs in queue) has been verified. It was not the case. So I don't know why it is keeping the job in the queue. When we first got the urge last year, he had the printing problem, although she probably had the problem of the queue.

  Hello autumnperson1,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP Envy 4500 printer will we ' print half picture

  I bought a HP Envy 4500 printer today and I have problems printing, sending that one to the printer prints a little less than half page and then comes up with an error message saying cannot send the job "jobname" printer.

  I'm under Win 8 64 bit

  configuration wireless printer (impossible to hard wire this unit)

  Tried the plain paper and photo paper

  To update printer firmware

  PC software update

  Tried both options for "print after winding" or "paper imidiedtly".

  Tried to reduce the file size of photos (of 5.5 mb 2.2 MB)

  Tried 3 other images that are much smaller in size

  HP Print doctor says everything is fine

  I ran so many tests, now I am running low on ink and I've only got the thing 4 hours ago.

  Well, it worked for two runs and then started doing it again. I managed to find the problem for anyone who bought this printer and is having the same problem I try the following...

  Unplug the power cable

  Unplug the USB cable (if used on USB)

  Remove the CD from your PC (if it was)

  Then, uninstall all HP software.

  Zone the printer, then take it back to the shop, you got him, of if it's something like the place I got mine since the after you explain the question the person will say just "yeh sure no problem" without even checking to see if there is a fault.

  The person I spoke showed me a nice Epson printer taking after 5 minutes the connection and installation of discs worked the first time!

• HP Envy 4502 print order

  Just bought the 4502 desire and I have a program that is a large database and I want to print a report of last month.  I would like to change the printing order to print last page first.  I use Windows 7.  In the past I could change the print order in the preferences, and now I can't.  Or I forgot something.

  I might have to return the printer for this reason, so please help.

  Hey @FDWanko,

  Welcome to the Forums of HP Support!

  I would like to help you with the resolution of the problem of order of printed page that you are having with your HP ENVY 4502 e-all-in-one printer today. I did a survey and found that the functionality you are looking for is not available with the HP Envy 4502 print driver. However, I found a solution that should work for you fine.

  In order to get the function of control of page you are looking for, you need to load an alternative driver on your printer.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP ENVY 4502 and left click on printer properties
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your printer in HP ENVY 4502
  13. Click OK
  14. Finally, right click on your HP ENVY 4502 one more time and click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK
  18. Try to print your order of the desired page.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• ENVY 100 printer D410 - screen says "Do not, power down during the update" permanently.

  I'm a Mac user Mavericks 10.9.1 running on a Mac Book Pro.

  I have a HP ENVY 100 D410 printer that works your for a few years.

  Recently, the LCD screen of the display on the printer offered, "there is a new driver. You want to update? "(Yes/no)

  (Or something close to that.)

  Unfortunately, I chose 'yes '.

  The printer then tried to update, but eventaully the LCD screen on the printer displays a flashing message:

  "Do not feed, down during the update"

  The printer now flashes just this screen continuously. The LCD screen will not display anything other than this message.

  The printer works when connected by cable and wireless. (Airprint works very well).

  I can scan documents, I can print pages, I can even access printers "Web page.

  But the LCD touch screen control panel is 'stuck' in flashing update message.

  I can't find any way to clear this error and allow the printer to complete the update.

  Help. Please, I beg you.

  Hello

  There is a fix to resolve the specific problem, but I'm afraid it is only available for earlier operating systems under OS X 10.5 and 10.6, Windows XP, Vista or 7.

  I you suggest to get a computer with any operating system supported, install the latest version of the software on the HP site using a USB and then follow the steps.

  The latest version of the software can be found below (the basic software should be sufficient):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4062&product=4073738&softwareitem=MP-92513-1&sw_lang=&

  Make sure that you carefully go through the procedure to the installation section in the patch download page.

  Hope that helps,

  Shlomi

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• Printer Envy 7460: How Hackable is my Envy 7460 printer?

  The recent attacks denial of Service distributed on the main websites used a large number of pirate designs accessible Internet, including printers.  How hackable is my Envy 7460 printer?  Can I change the password?

  Thank you.

  Not very hackable.   Change the password?  Of course, change your SSID and password of your router.  Not go back and reconnect again SSID with password.

• HP Envy 4523: Printing without margins

  Hello

  The HP Envy 4523 print width without borders of paper A4 size and means of length?

  Hi @NeilLondon99.

  Welcome to the Forums of HP's Support. I understand that you want to know if the 4523 Envy is able to print borderless. I would like to help.

  In short, the answer is no.

  Media A4 - 3.3 mm (0.13 inch) for Left, Right, Top and Bottom.

  Here is a link to the printer's Specifications for reference.

  Let me know if that answers your question. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!