Configuration of the database for the services of the Foundation

Hi Master,

Someone could please let me know... How to find the schema on which the Foundation services is configured in an environment? is there any config file where you can see this?

Thank you

Siva

Siva,

If it's v11.1.2.1 ou.2 then you can watch reg.properties in:

: \Oracle\Middleware\user_projects\\config\foundation\11.1.2.0

Later versions will be here:

: \Oracle\Middleware\user_projects\config\foundation\11.1.2.0

The reg.properties file will have the string of JDBC connection in it.  Who will let you know the server and the scheme used.

Kind regards
Frank

Tags: Business Intelligence

Similar Questions

  • Configuration of the database for the deployment of Hyperion Planning 9.3.1

    Hello

    I'm deployment Hyperion Planning 9.3.1. I read in many places that I need to configure a separate database for each component rather than use a single. Nobody knows the ideal of data distribution if I install the following components:

    -Hyperion Shared Services
    -Essbase Server
    -Essbase Administration services
    -Essbase service provider
    -Oracle Hyperion Enterprise Performance Management architect
    -Planning
    -Hyperion reports & analysis

    Can I configure EPMA and planning on separate databases as well? As for the configuration of data source?

    Any help would be appreciated.

    Thanks in advance

    Shehzad

    Hello

    Best practices during the installation would be to create the DB sql distinct for each of your products as follows (you don't have to follow the naming conventions)

    -SSP Hyperion 9 (hypHSS)
    -Essbase Server (without SQL repository Req'd)
    -Essbase Services Administration (hypEAS)
    -Essbase provider Services (without SQL repository Req'd)
    -Oracle Hyperion Enterprise Performance Management architect (hypEPMA)
    -Planning (hypPlanSys)
    -Hyperion Reporting & analysis (hyper)

    Remember, if you are creating applications to planning you will also need to create a db SQL distinct for the application, as well as planning SQL db.

    DataSource configurations can then raise the relevant DB.

    Hope this helps

    J

  • Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

    https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

    Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

    Capture.PNG

    However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

    1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

    2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

    3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

    It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

    In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

  • Could not send data to configuration ldap to libOvd for the instance of service 'idstore.ldap' - 'socketOptions' element should not

    Hello

    I have an installed WebLogic 10.3.6 with ADR 11.1.1.6 cluster.

    Everything worked fine until recently when I installed Web Tier 11.1.1.7 and associated with the instance of OSH with my WebLogic AdminServer EM.

    Now I can't start my managed servers, receive the below error message.  I tried to add "-Djava.security.debug = jpspolicy" to JAVA_OPTIONS strings in startManagedWeblogic.sh, but they do not get more information.

    JAVA_OPTIONS = "-Djava.security.debug=jpspolicy-Dweblogic.security.SSL.trustedCAKeyStore="/u01/app/oracle/Middleware/wlser\

    "Ver_10.3/Server/lib/cacerts" ${JAVA_OPTIONS} "

    Any advice would be appreciated.

    # < 26 June 2013 16:22:23 UTC > < critical > < WebLogicServer > < gds-dev-mt-1 > < ManagedServer_1 > < main Thread > < < WLS Kernel > > <><>< 1372263743069 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed due to the exception, see exception stack trace or the log file of the server root. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

    at weblogic.security.SecurityService.start(SecurityService.java:141)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: oracle.security.jps.JpsRuntimeException: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

    to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

    to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

    at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

    at java.lang.Class.newInstance0(Class.java:357)

    at java.lang.Class.newInstance(Class.java:310)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

    at weblogic.security.SecurityService.start(SecurityService.java:142)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Layer Web 11.1.1.6 does not exhibit this problem.  Sex Web 11.1.1.7 patched the oracle_common and I feel is not compatible with ADR 11.1.1.6 or 11.1.1.7

  • How to check if the database for DRDA gateway is installed and configured.

    Hi all

    How can we check if the database for DRDA gateway is installed and configured.

    Our operating system is AIX 5 L 64 bit OS.
    RDBMS: 11.2.0.3

    Kind regards

    Duplicated
    How to check if the database for DRDA gateway is installed and configured.

    + - locked thread-+.

    Nicolas.

  • Configuration of the laptop for R12 with node 2 11g RAC database

    Hi all

    I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.

    Configuration:
    generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
    8 GB RAM DDR3
    750 GB HARD drive
    this configuration will be sufficient for the highest installation? RAM? Processor?

    I've read a few threads over on this forum where people have recommended for installation of single application (11i or R12), this kind of configuration can be enough.

    Please answer.

    Thanks in advance.

    Brij

    I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.

    Configuration:

    generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
    8 GB RAM DDR3
    HARD DRIVE 750 GB

    This configuration will be sufficient for the highest installation? RAM? Processor?

    You need at least 4 GB for installation on a single node R12. So, if you plan to have 3 VMs (1 application node) and 2 RAC nodes or 4 virtual machines (2 application and 2 RAC nodes), then I suggest that you add more memory. However, your RAM should work, but don't expect (if you go with 3 VMs) but do not expect the performance to be perfect.

    Thank you
    Hussein

  • Best practices Check - Configuration of the Communication Service

    So, we have the following here the use case...

    Background:

    We have a FMS instance that has several teams using multiple applications, air conditioned and have their own specific communication needs. Teams of infrastructure, such as the database or Server team are also included on this FMS. We have services configured around applications and their dependencies, so a single object will exist in several services.

    To work around the lack of granularity configuration and horrible the service-based E-mail in the form, I created an event rule that queries for FSMServices affected for a given event and iterates over all the unique services, pulling on the notification settings through our way of soil and trigger Actions from the command line or appropriate accordingly EmailActions... we use of the-d in the field of shortDesc service options.

    Example:

    (You can ask for a detailed explanation of what do the settings, if you wish, or that the levels called - but they are just an additive representation of the levels of severity in foglight)

    Here's our new problem:

    We have teams who want notification on certain rules of certain severities (such as criticism), but not others. This has created the need for a 'white list' or the 'black list' of the original names of rule for the event to determine whether an event should be communicated to our NOC or paged on our teams.

    My solution of thought:


    We will create a new cartridge (FoglightCommunication) that contains a custom dashboard and the definition of the topology for a FSMServiceConfig object. This object contains a white list or black list for some rules should be provided for each service. This TopologyObject would also resume functionality which serve as my current shortDesc variables... Essentially, it would contain all THE information relevant to its corresponding FSMService object configuration. We have experience in creating modules advanced both in the creation of Foglight cartridge/agents/topology definitions.

    The dashboard would exist to facilitate the configuration of this new object and to facilitate the visualization of the current communication service. This would also allow our team to allow the teams less educated with Foglight feature more easily and completely configure their own communication service. Empowering the team owner is always a good thing

    My Question:

    Did someone in the quest (it's such a name cooler than Dell) sees a problem with this? My only concern is that we could lose all our configuration information to uninstall the cartridge for a upgrade problem. He might consider a work around with an option to export/import... but it's a messy solution and a non-human evidence. Is there a way to specify the data to be persisted, even if the cartridge that has defined this topology definition is uninstalled?

    I'd appreciate any comments or thoughts. Thank you!

    Hi Adam.

    This looks like a very useful customization. I don't see why your team should not move forward with that.

    I also like the idea of building an import/export feature in your cartridge in order to preserve the configurations in case you need to uninstall the cartridge. Note that even in this case, type of custom topology that was written to the repository data Foglight will always be there (i.e. it will not be served unless you specifically request this) - so you can be able to get Foglight to save the configuration information important for you.

    I encourage you to update the community on your progress on this and send questions, screencaps, etc., as needed.

    Thank you!

    Robert Statsinger

  • Failover of the database for applications using JDBC connections

    Hello

    We have DataGuard instances for our Production databases and are configuring failover falls down the primary databases. We are able to set up TNS/LDAP for applications that use this method of connection, however we have a number of applications third-party who connect using JDBC and are not configurable in any other method. Is there something we can do about it or we manually configure these applications if a failover is required?

    Thank you

    Adam

    AdamJ.Sawyer wrote:

    Hello

    We have DataGuard instances for our Production databases and are configuring failover falls down the primary databases. We are able to set up TNS/LDAP for applications that use this method of connection, however we have a number of applications third-party who connect using JDBC and are not configurable in any other method. Is there something we can do about it or we manually configure these applications if a failover is required?

    Thank you

    Adam

    JDBC:Oracle:thin:[user/password]@//[host][:port]/service

    consider that 'HOSTING' can be rather a virtual IP (VIP); which can be configured at the level of the BONE

  • ApexListener 2.0 is configured with the name of the service, but SQLDeveloper said SID

    Hello
    I have configured the ApexListener 2.0.0.354.17.05 through command line interface as described in http://docs.oracle.com/cd/E37099_01/doc/ doc.20 /e25066/install.htm
    [oracle@rac02 apex_listener]$ java -jar apex.war 
This Listener instance has not yet been configured.
Please complete the following prompts

Enter the location to store configuration data:/u01/app/oracle/apex_listener
Jan 8, 2013 2:29:00 PM oracle.dbtools.common.config.cmds.ConfigDir execute
INFO: Set config.dir to /u01/app/oracle/apex_listener in: /home/oracle/apex_listener/apex.war
Jan 8, 2013 2:29:03 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/apex_listener/apex
Enter the name of the database server [localhost]:rac-scan.akragmbh.local
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:
Enter the database service name:rac.akragmbh.local
Enter the database user name [APEX_PUBLIC_USER]:
[...]
    Everything worked well and the configuration is written in defaults.xml. No entry for the key 'db.sid '.
    [oracle@rac02 apex]$ cat /u01/app/oracle/apex_listener/apex/defaults.xml 
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>
<comment>Saved on Tue Jan 08 14:30:03 CET 2013</comment>
[...]
<entry key="db.hostname">rac-scan.akragmbh.local</entry>
<entry key="db.password">I don't tell</entry>
<entry key="db.port">1521</entry>
<entry key="db.servicename">rac.akragmbh.local</entry>
[...]
    The listener and the APEX is running.

    But when I import the configuration of ApexListener in SQLDeveloper 3.2.20.09 the dialogbox said, I configured a SID instead of a service name.
    It is the saved configuration
    <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties>

<comment>
   Listener Administration
   Oracle SQL Developer 3.2.20.09.87
   Last Update: Tue Jan 08 16:07:23 CET 2013
</comment>

<entry key="db.password">I don't tell</entry>
<entry key="db.connectionType">basic</entry>
<entry key="db.hostname">rac-scan.akragmbh.local</entry>
<entry key="db.port">1521</entry>
<entry key="db.sid">orcl</entry>
<entry key="db.servicename">rac.akragmbh.local</entry>
<entry key="db.tnsAliasName"/>
<entry key="db.tnsDirectory"/>
<entry key="db.customURL"/>
[...]
    What's wrong?

    There is a bug in SQL Developer providing a default SID "orcl", even if a service name is provided. The solution is to remove the SID "orcl" in

    1. parametres_globaux-> connections and
    2 database settings-> name (e.g. apex)-> connections

    Make sure you do these changes before loading your settings.

    Published by: Liz Saunders January 8, 2013 15:52

  • "The process of home for Windows Services

    Why do I get the message that the host process for Windows Services has stopped working and closed whenever I try to start my computer?  What is the host process for Windows Services and what I can do to solve the problem?

    Hello

    What is rundll32.exe and why it works?
    http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

    What is the suspicious Rundll32.exe process?
    http://WindowsXP.MVPs.org/Rundll32.htm

    -----------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------

    If no joy trying to determine what is the cause:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
    of these here.

    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have
    Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
    you who owns each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured so that it starts automatically when your system
    boots and you login. Autoruns shows you the full list of registry and file locations where
    applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Startup Type
    (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Show VLAN configured on the specific Service profile

    Hello

    I've been trying to figure out how I can check what VLAN, I assigned to each profile service through CLI. I have no trouble with that view through the GUI, but there are so many clicks to check each server (10) with its NETWORK (2) cards.

    Anyone know how this is possible?

    And Yes, I have configured vNIC air with the VLANs mapped to them for the last two blades but I've not had the chance to change this settings on my first 10 profiles =).

    2.0(1t) running

    Thank you!

    Martin

    Martin,

    Hope that this helps out you

    See the configuration | egrep-i ' enter vnic. Service-pr | ETH - if '

    This shows that the VLANS configured explicitly for each vNIC under a service profile. I have not tested with the service with vNIC political profile.

    Alternatively, if you are interested in service under an organization profiles

    scope org.

    See the configuration | egrep-i ' enter vnic. Service-pr | ETH - if '

    HTH

    Padma

  • How to configure Enterprise Manager Database Control (MCCD) to make it work on 2 servers (primary and standby) work according to the rules of the DG

    Hello everyone I use Oracle Database EE 11.2.0.4 with DG.

    In these cases, I need to get Enterprise Manager Database Control running against DB with no CARS and no DG I do the following:

    I have SQLPLUS logon as user SYS or SYSTEM and drop the account sysman and business objects:

    DECLARE

    CURSOR c1 IS

    SELECT master, synonym_name name

    OF dba_synonyms

    WHERE table_owner = "SYSMAN";

    BEGIN

    TO r1 c1 LOOP

    IF r1.owner = "PUBLIC" THEN

    RUN IMMEDIATELY "DROP PUBLIC SYNONYM ' |" R1. Name;

    ON THE OTHER

    RUN IMMEDIATELY "DROP SYNONYM ' |" R1. Owner: '. ' || R1. Name;

    END IF;

    END LOOP;

    END;

    /

    Mgmt_view DROP USER CASCADE;

    /

    DROP ROLE mgmt_user;

    /

    Sysman DROP USER CASCADE;

    /

    After that, I run

    EMCA - config dbcontrol db-rest recreate

    But what do I do in case I have 2 servers (primary and standby) work according to the rules of the DG?

    Hello

    It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard.  This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.

    If you attempt to run emca against a database of pending, you will get an error like (i.e. ORA-01219: database is not open).

    Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features).  In such a case, failover Database Control needs to be reconfigured to run on the new primary database using the commands described in detail in Note 278100.1 how to remove, create and recreate DB Control In A Database, section c. recreate/ReConfig DB control, Option 2 10 g. recreate the control DB Configuration files and repository.

    Enterprise Manager Grid Control or Cloud control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.

    Reference: It is Possible to configure the database for a logical or physical Standby Database command? (Doc ID 315116.1)

    You can effectively use EM 12 c cloud control to monitor and manager ensures DB

    Ref to the link for more details below

    Set up and manage to Oracle Data Guard with Oracle Enterprise Manager Cloud control 12 c

    Kind regards

    Rahul

  • Cannot find a service record for vCenter service with the host name "IP address"

    After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

    After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

    Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

    In Zeile:2 Zeichen:1

    + Get-TagCategory

    + ~~~~~~~~~~~~~~~

    + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

    + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

    does anyone have a solution or an idea for this problem?

    Best

    Marco

    I have exactly the same problem. Are there solutions yet?

    Best regards

    René

    Found the solution in the database (2127028).

  • Configuration of the network card for my installation

    Hello

    Host machine: Windows-7, wireless, wired network card network card

    The computer invited: Oracle Linux 6.1

    I want to install oracle on my guest computer database and access it from the host machine. I do not particularly like about sharing this database with all other machines in the network (other than the host and all guest computers created on this server).

    What network card configuration would work better for me?

    My host computer is a portable computer. I plan on using this laptop at home, as well as the work. At home I have access to the wired network and wireless (DHCP) while at work I have access only to wireless (DHCP) network.

    I tried to adjust my VM as NAT & Host-Only network. My VM guest Gets the IP address but I cannot ping the virtual machine to the host using machine VM name. If I use the IP address of the virtual machine to ping, it works.

    Thank you

    Yogesh

    Welcome to the community,

    with the requirements you mention, I would recommend a host-only configuration. Due to lack of DNS resolution, you can configure the host with a fixed IP address in the Host-Only range and add the Oracle VM to the hosts of your Windows system file.

    Use a fixed IP address between 192.168.x.2 and... 127, above this addresses are used by DHCP.

    André

  • Needs of the company to run for Regional service rule Migration

    We have issues with the server of the Regional service in one of the env, it is offline. The user wants to access this env BR, so server EAS must run to migrate these BR using LCM or LCM would connect with the database for the migration repository.

    If you use the LCM, you don't have to have EAS running. However, HBR is probably the weakest feature of LCM (in my experience).

    Pablo

Maybe you are looking for