Needs of the company to run for Regional service rule Migration

Similar Questions

• Message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no sound more until I reboot

  I have a hp Pavilion working with XP but recently I installed Windows Office 2007. Since then, I have problems with the sound system. I got a message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no more sound. I can't open the volume control as the system says that nothing is installed. I always need to restart my computer to get the sound working again. Help!

  Thank you, Jerry. I'll try it, but for now it works well. I fit it and it seems to have done the trick.

  See you soon,.
  Karine

• "The process of home for Windows Services

  Why do I get the message that the host process for Windows Services has stopped working and closed whenever I try to start my computer?  What is the host process for Windows Services and what I can do to solve the problem?

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Oh no! There is a problem with your recent payment. Update the details of payment for uninterrupted service.

  Hello

  I get this message:

  
  Oh no! There is a problem with your recent payment. Update payment details for uninterrupted service.

  But I have no idea what the 'problem' and payment information are correct...

  What should I do? It seems impossible to contact any Adobe
  

  Hi liamg9149512,

  I see that the payment issue is now resolved with your account.

  Please let us know if there is anything else, we can help you.

• Need of the ACL kung fu for VPN from Site to Site ACL problem

  Group,

  Have a little problem I know is related to ACL. I wanted to have a few experts to take a look at my config please. Here's the question:

  Attempt to create a site between two offices, but for some reason any that they cannot ping each other. It is a strange thing.

  97.XX.231.22 <-->71.xx.160.123

  I can ping both firewalls from the outside using a computer to another, but from the internal firewall utilities, they cannot ping each other. At the same time I can ping to their respective gateways.

  Secondly, I did an interior outside translation as you can see here for 80 & 443 preventing me from browsing http and https via VPN for Remote LAN, can it be modified to allow access? I can access when I dial in via VPN client but not via permanent VPN tunnel. Here is the config.

  no ip nat service sip 5060 udp port

  IP nat inside source map route SDM_RMAP_1 interface GigabitEthernet0/0 overload

  IP nat inside source static tcp 10.41.14.103 80 71.xx.160.123 80 extensible

  IP nat inside source static tcp 10.41.14.103 71.xx.160.123 expandable 443 443

  IP route 0.0.0.0 0.0.0.0 71.xx.160.121

  IP route 10.67.188.32 255.255.255.224 10.41.14.99 6 permanent

  IP route 10.67.188.96 255.255.255.224 10.41.14.99 8 permanent

  IP route 10.200.107.0 255.255.255.0 10.41.14.99 9 permanent

  IP route 10.200.110.0 255.255.254.0 10.41.14.99 7 permanent

  IP route 74.200.107.0 255.255.255.0 10.41.14.99 5 permanent

  IP route 74.200.110.0 255.255.254.0 10.41.14.99 4 permanent

  IP route 208.67.188.32 255.255.255.224 10.41.14.99 2 Permanent

  IP route 208.67.188.96 255.255.255.224 10.41.14.99 3 permanent

  !

  auto discovering IP sla

  Logging trap errors

  host 192.168.10.29 record

  access-list 2 Note HTTP access class

  Note access-list category 2 CCP_ACL = 1

  Note access-list 2 Platinum LAN

  access-list 2 permit 10.41.14.0 0.0.0.255

  access-list 2 refuse any

  Access-list 101 remark rules Master

  Note access-list 101 category CCP_ACL = 1

  Note access-list 101 FaxFinder WWW traffic

  access-list 101 permit tcp any host 71.xx.160.123 eq www

  Note access-list 101 traffic HTTPS FaxFinder

  access-list 101 permit tcp any host 71.xx.160.123 eq 443

  Note access-list 101 NTP Time Protocol

  access-list 101 permit udp any host 71.xx.160.123 eq ntp

  Access-list 101 remark IPSEC protocols

  access-list 101 permit udp any host 71.xx.160.123 eq non500-isakmp

  Access-list 101 remark IPSEC protocols

  access-list 101 permit udp any host 71.xx.160.123 eq isakmp

  Note access-list 101 traffic ESP

  access-list 101 permit esp any host 71.xx.160.123

  Note the access list 101 General License

  access list 101 ip allow a whole

  Note access-list 102 CCP_ACL category = 2

  access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255

  Note access-list 102 IPSec rule

  access-list 102 deny ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255

  Note access-list 102 IPSec rule

  access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31

  Access-list 102 remark Platinum LAN NAT rule

  access-list 102 permit ip 10.41.14.0 0.0.0.255 any

  Note category from the list of access-104 = 4 CCP_ACL

  Note access-list 104 IPSec rule

  access-list 104. allow ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31

  Note access-list 108 CCP_ACL category = 4

  access-list 108 allow ip 10.41.14.0 0.0.0.255 any

  Note access-list 109 IPSec rule

  Note access-list 109 CCP_ACL category = 4

  access-list 109 allow ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255

  Note access-list 110 CCP_ACL category = 4

  Note access-list 110 IPSec rule

  access-list 110 permit ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255

  not run cdp

  !

  allowed SDM_RMAP_1 1 route map

  corresponds to the IP 102

  There is more then one way how you can achieve this goal.

  (1) the best way is possible if the two VPN counterparts are IOS routers. Then you can migrate to virtual VPN - tunnel interfaces (VTI). With this, the external interface doesn't mix - and non-VPN-traffic VPN.

  (2) if VTI is not possible, you can restrict the translation to only non - VPN traffic using a roadmap:

  object-group network RFC1918

  10.0.0.0 255.0.0.0

  172.16.0.0 255.240.0.0

  192.168.0.0 255.255.0.0

  NAT-SERVER - 10.41.14.103 allowed 10 route map

  corresponds to the TRAFFIC-NAT-SERVER IP - 10.41.14.103

  TRAFFIC-NAT-SERVER extended IP access list - 10.41.14.103

  deny ip host 10.41.14.103 object-group RFC1918

  permit tcp host 10.41.14.103 eq 80 a

  allow a host EQ 10.41.14.103 tcp 443

  IP nat inside source static 10.41.14.103 71.xx... map route NAT-SERVER - 10.41.14.103

  What makes that?

  When your server communicates with a system with an address in the range RFC1918, then the road map does not correspond and the translation is not used. It is you, the VPN scenario. But if the server communicates with a non-RFC1918 address, then the translation is used and the server can be reached.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Disable the company to check for default browser

  I'm trying to disable checking of default Firefox browser on my Windows 7 x 64 for a VM pool gold statue. I have seen several articles and they all suggest I have add the following lines in my preferences file:

       pref("general.config.obscure_value", 0);
       pref("general.config.filename", "mozilla.cfg");
  

  1. I add these lines and firefox does not open.
  2. I disable the pref ("general.config.obscure_value", 0); line of my preferences file and firefox opens without the guest default browser, but only once.
  3. I close Firefox and re-open it, and the default browser control is back. Can I recycle the three steps and reproduce it.

  Don't know where to go from here. Any help would be appreciated.

  I see typo in datareporting.policy.dataSubmissionPolicyAccepted line: «;» false "instead of", false ".

  Pref ("datareporting.policy.dataSubmissionPolicyAccepted"; false);

• Error messages for cross validation rules does not properly

  We have implemented two rules of cross validation for our table GL accounts flexfield combinations.  We had implemented the first rule, and it was working properly and displays the error message associated with the rule.  When we added a second rule with a different error message, the application correctly applied the rule, however, now when a new combination of COA violates the first rule, the error message that is displayed is the second rule we created.  How can we get the error messages to be displayed for the correct error?

  Matt

  Yes, if you say that when the 3 segment is actually "OPEX", then it seems to me that the Include and Exclude are simply reversed for what you describe as the needs of the company. When you make a rule, the simplest way to define this term is usually with a universal Include statement (that is to say, we want that all combinations of account), then from there to make a statement that says Yes all except these (the exclude statement).

  Aware in Opex Department will exercise a universal declaration currently, which means that all of these accounts are not allowed (again, except if 7-9 segments have something else of zeros, while they may be permitted).

  If your site back how intervals are defined between the Include and Exclude in the Department and Opex, once registered, you can see if this gives now what you are looking for. If segment 3 is supposed to have a range rather than the value "OPEX", then the exclusion may need further tweaking and we can discuss that further if you wish. With the way in which it will be set to this change, it will not allow a segment 2 to 00000 if the Segment 3 is "OPEX" during a new combination.

  Please mark answers 'Proper' or 'Useful', as appropriate, to facilitate solutions to the other participants of the RTO.

• The scaner of safety program run for almost two hours and did not have detected what regardless of whether what is this microsoft scan?

  Operating system: Microsofti¿½ Windows Vista? Home (it shows that I have this Setup on my computer)

  My computer is corrupt the scaner microsoft run for almost two hours and did not find anyting.

  I have siscis Trojan, Skype worm PEKSE aver 1300 errors discovered by the other's signed starup program...

  Port 80 and 123 corrupt... I'm on hollow connection DSL my modem wireless (and connected to some infrastructure 5 GHz) and 2.4 Ghz wireless where I search I'm somehow hacked via the wireless I guess...

  Any program which tells you that you have 1300 errors is almost certainly a scam.

  Try to scan with Malwarebytes free

  http://www.Malwarebytes.org/products/malwarebytes_free

• Removal of the preferences of sort for a specific region

  Version 4.2.6.00.03

  Hello

  I hope someone could help me with how to erase the preferences of sort for a specific region.

  I have a classic report with a column in place to apply sorting and a form of tab that has a column in place to apply the sort.

  I have a button to clear the sort who calls a process Page:

  BEGIN

  APEX_UTIL. REMOVE_SORT_PREFERENCES(:APP_USER);

  END;

  This clears the sorting on the two regions. So, how can I set it up to only clear the sorting on the form tab?

  Hope this is clear.

  Thank you

  Joe

  Joe R wrote:

  The link for the report of the admin user preference throws a 404 error.

  Oracle has moved and have apparently never heard of redirection rules: http://docs.oracle.com/cd/E23903_01/doc.41/e21678/aadm_mg_sessions.htm#CIHEADDF

  If you exceed this problem using the links in the old posts, simply remove the "/ doc" component of the path of the URL.

  I also had a Table or view does not exist on:

  SELECT *.

  OF WWV_FLOW_PREFERENCES$;

  This is why I suggested looking at the admin report. This table is not accessible to the public in a default installation, and the information is not exposed in one of the documented views of metadata. As you will see in the report, sorting preference is stored as a name/value pair:

  Name	Value
  FSP1948_P8_R57820102721076385301_SORT	fsp_sort_3_desc

  Where the name is of the form FSP_P_R_SORT, and the value is fsp_sort__. If you want to remove the preference, then the name is relevant, because it is the parameter required for the apex_util.remove_preference method. However, preferably the name will be different on each environment that the application is deployed, so it is to be determined dynamically. Give the region a static ID to use as an independent environment reference and use it in a query to determine the name preferably by using the ID of the internal region of the opinion of the APEX:

  begin
  
    for region in (
      select
          'FSP' || :app_id || '_P' || :app_page_id || '_R' || region_id || '_SORT' sort_pref
      from
          apex_application_page_regions
      where
          application_id = :app_id
      and page_id = :app_page_id
      and static_id = 'region-static-id')
    loop
      apex_util.remove_preference(region.sort_pref);
    end loop;
  
  end;
  

  Probably a good idea to create this as a reusable utility function.

• run query region only on click of a button

  Hello
  I have been out of reach of APEX for a while now. what I want to achieve can be simple. Here's what I'm looking for.
  
  I have a page that contains a region with several dropdowns (Items) for the user to filter. the default value for all drop-down lists is "ALL". When loading this page drop-down menus are default to 'ALL' and my query is written so that it displays results has these default values. It is as good as any 'where condition"in the query. the user can make choices of drop-down menus and press the button named "SELECT" to display the filtered results. everything is good and works.
  
  what I want is, when the page is loaded I don't want the query to run for "ALL". This is a request for a long time and no one cares for the results with the filters set to 'ALL '. I want just the filters to appear on the page. the user can click just "SELECT" to see all results or filter on the "SELECT" and drop-down menus to display the filtered results.
  
  entries how to carry out what are appreciated.
  
  I hope I am clear.
  
  Thank you

  I would create a button that triggers a process that executes the query. For example:

  QUERY_RESULTS is tha region contains the results of your query.
  P1_RUN_QUERY would be the name of button
  RUN_QUERY would be the value REQUEST button
  P1_Select_A, P1_Select_B, P1_Select_C are your drop-down lists
  SHOW_REGION application, set to 0

  You can create a region based on the following pl/sql query:

  Select * from t_mystuff t
  where t.criteria: =: P1_Select_A and
  t.criteria_2: =: P1_Select_B and
  t.criteria_3: =: P1_Select_C

  Then, set a condition on the region so that it shows only when SHOW_REGION = 1

  A process page can be assigned to run when you press P1_RUN_QUERY, who runs an anonymous PL/SQL block, something like this:

  Start

  If: SHOW_REGION: = 0 then
  : SHOW_REGION: = 1
  ON THE OTHER
  : SHOW_REGION: = 0
  end if;

  end;

  Management would be subordinated to the RUN_QUERY request and would branch to the same page that has the QUERY_RESULTS region.

• How to set the time-out value for a namedcache programmatically?

  I have a cache named with near cache configuration and no expiration set in the cache configuration. The backup plan that is a distributed system has a policy of expulsion of limited size, but no expiration. I have an algorithm to determine the timeout of this cache named at run time. How can I adjust this delay on the named cache programmatically?
  
  Thank you
  Sairam

  Hi Sairam,

  You need get the plan of support for the cache and set the expiration on the support plan; assuming that the storage card is supported by the expiry.

  For example:

  NamedCache cache = CacheFactory.getCache ("test");

  CacheService service = cache.getCacheService ();
  DefaultConfigurableCacheFactory.Manager MDB = service.getBackingMapManager ((DefaultConfigurableCacheFactory.Manager));
  Map of bm = bmm.getBackingMap ("test");

  If (WB instanceof ConfigurableCacheMap)
  {
  System.out.println ("timeout setting");
  (WB) .setExpiryDelay (100000) (ConfigurableCacheMap);
  }

  -John

• When I right click a game why do I have the option to run it in administrator mode?

  I tried to fire up the game in administrator mode and I don't have that option or the ability to run in XP service pack 2, can help?

  I tried to fire up the game in administrator mode and I don't have that option or the ability to run in XP service pack 2, can help?

  Right click, run as Administrator was not available in Windows XP.

  the RunAs command line can be usedif you need to run the game under a different account...

• How to order the CD of drivers for printer

  My mother-in-law still use windows xp and I need to order a cd for a printer that was given to him.  I tried to download the driver and make a cd for him but it gave me an error message that the title is too long.  The printer driver it needs is the all in one for f380.  She lives in another State or I would just download it to her computer for her.  Any help will be greatly appreciated.

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  This is a large file:

  Communicate details
  Exit the:
  2009-08-15
  Name of the file:
  AiO_071_000_201_000_CDA_Default - Full_Network_AmericasEuro1_NB.exe [1/1, 506,97 M]
  Version
  7.0.2
  Compatibility:
  Microsoft Windows XP
  Microsoft Windows 2000

  But must match to a CD. You can make the shorter name to rename.

  Kind regards.

• Detect the first application running

  I create an application with a SQLlite database in the SD card. The application is already installed in the device and the database has already been created on the SD card.

  However, I have a newer version of the application and a newer database structure for it. I want to change the database table when the user launches the application newer version for the first time.

  The problem is: how to detect that the application is running for the first time?

  You have many options to do so, but according to my suggestion, you can have an object stored in the persistent store to indicate the version of the app and start can check if the application has the same version number as the stored object.

• Report the last event (notice) for a device

  I could have sworn that I had this work before, but for the life of me I don't remember how I did it and I can't seem to understand this new.
  
  I am tracking events by device. A device can have any number of events in a given period of time. I need follow the MOST RECENT event for a device by device. I don't want to have multiple records by device, only the record with the MOST RECENT timestamp.
  
  I made two subsequent attempts, but I still get nowhere.
  

  select
    device,
    MAX(dt) KEEP (DENSE_RANK FIRST ORDER BY dt) as time_Var
  from db_table partition (pPname)
  where
      Lower(example) like '%example text%'
      and dt > sysdate - 5

  and

  select DISTINCT
  device,
         (select TO_CHAR( (MAX(table_name.dt)), 'HH24:MI:SS MM/DD/YYYY') "timeVar"
            from table_name partition (pPName)
            where
         Lower(Example) like '%example text%'
         and dt > sysdate - 5)
            
  from table_name partition (pPName)
  where
      Lower(Example) like '%example text%'
      and dt > sysdate - 5
  order by device Asc;

  Hello

  Savage solution with

  KEEP (DENSE_RANK FIRST ORDER BY dt)
  

  will show you the event the less recent in the last 5 days.
  If you want the most recent event, change "FIRST", "Last".

  KEEP (DENSE_RANK LAST ORDER BY dt)
  

  or sort in descending order:

  KEEP (DENSE_RANK FIRST ORDER BY dt DESC)
  

  If you want to display more than one column in the last row, you will need to use the DUNGEON (DENSE_RANK...) on each of them (except devices).
  In this case, you will find may be easier to use an analytical function, such as ROW_NUMBER:

  WITH     ranked_data  AS
  (
       SELECT     device, column_a, column_b, column_c
       ,     ROW_NUMBER () OVER ( PARTITION BY  device
                                 ORDER BY          dt     DESC
                         )  AS r_num
       FROM     your_table
       WHERE     LOWER (example)      LIKE '%example text%'
       AND     dt               > SYSDATE - 5
  )
  SELECT  device, column_a, column_b, column_c
  FROM     ranked_data
  WHERE     r_num   = 1;