Update the Configuration of the switch switch 2.1 Executive to 3.5

Similar Questions

• The switch Catalyst 3560 G Web Interface problem

  Hello

  I have a problem with my switch to Cisco Catalyst 3560 G. The web interface does not work (I tried IE11, IE6, Chrome, Firefox, and Safari).

  There is only displayed icons but no text:

  Cisco.jpg

  

  To try to solve the problem, I have updated the switch to its latest version of IOS (from 12.2 (55) to 12.2 SE7 (55) SE9). But the problem persists

  WS-C3560G-48TS 12.2 SE9 (55) C3560-IPBASEK9-M

  In the configuration, the web server is enabled:
  IP http server
  IP http secure server

  What can I do?

  Thank you

  Best regards
  Fabien

  Hello Fabien,

  I think I found the problem and a workaround for this.

  The problem comes from the language of the webbrowser.

  I got exactly the same problem with the same model with the same version of IOS.

  I checked with the debugging tools in firefox and I find the browser want to get (firefox in french for my case) 2 scripts:

  http:///fr/charset.js

  http:///fr/re_preflight.js

  But there isn't any record of en flash: / C3560...

  So I changed the preferred language in firefox (put English first). Reload the Web page and it works very well ;)

  I hope this will help you

  Thank you

  Jeremy

• IviSwitch loses value when sending, "configure the switch" configuration = TRUE

  Hi all

  We are currently assessing Teststand 4.1 with a multimeter keithley 3706 switch system.

  After a first enthusiasm, thinking this tool with the meter switch fits perfectly our needs, real life seems difficult.

  Between several other problems, we must say to the device, the channel "s1com1" and "s1com2" are strings of configuration.

  Configure the teststand step: change the switch step IVI-> IVI, switching, configuration switch: channels "s1com1" Configuration = True

  led to observable in both actions in Ni Spy:

  GetAttributeViBoolean (..., "s1com1", _IS_CONFIGURATION_CHANNEL, VI_FALSE)

  SetAttributeViBoolean (..., "s1com1", _IS_CONFIGURATION_CHANNEL, VI_FALSE)

  manually call to this function of the interactive a CVI fp class works as expected (the VI_TRUE updated)

  Is there any hint that we could do wrong? Currently, we are just before writing wrappers in cvi and jump all the wonderful Types of IVIStep in teststand.

  Looking forward to any comments

  David Clus

  David-

  This would have the same problem we discovered recently in our internal tests. For the problem that we found, we will probably include our fix in a next corrective patch. You can check if the problem persists if you change your locale in English in the control panel? If the problem no longer occurs, can you use this as a workaround for now?

• The Switch configuration and Wi - fi router in the same network

  Hi team,

  I have here is the configuration currently as below in the image. To describe the same internet cable is connected to a Cisco switch, which is connected to the PC in LAN (wired). A switch output is connected to the entrance of the wireless router Netgear Nighthawk AC 1900 Smart model of WiFi router # R6900. Wireless devices (laptop) are connected by the router.

  Each device has internet access. However, I am unable to run software LAN or unable to share any file of devices connected to the switch to the connected wireless devices. I can't ping any device the device wireless wired.

  Can anyone suggest what are the settings that I should do or what are the steps I should follow that will make wireless and wired devices in the same network.

  PS Plus early I tried the internet connection to the wireless router and then out of the router to pass, which has solved this problem. But slowing down my internet speed in wired devices. So, is it possible to have all devices in the network even with the current configuration?

  

  Thanks in advance.

  Best,

  Hardik

  I made wi - fi router reset hardware and configured in Access Point mode, that solved my problem.

• HP Pavilion DV6 3122TX: updated the BIOS F.29 don't switch HP Pavilion DV6 3122TX Ati graphics card

  Hello

  I have HP Pavilion DV6 3122TX and recently I was updating my drivers and software from the HP Web site for my laptop. Everything was done smoothly. As I updated my BIOS, I noticed that I was not able to switch between ATI Radeon 5650 and Intel HD Graphics, then I was also shocked that he wasn't showing a charger plugged into icon too. Although the battery was charging but didn't show any icon for it. I am running Windows 7. After a few days, my battery was went wrong and was not in charge. I bought the new battery from HP Store for my laptop, and then after a few days now he is dying too. My computer laptop suddenly stops on about 30% of battery remaining and battery does not charge. I arranged another charger and plugged, but once more. I gave the laptop to the service center local and got NO from them as well. They couldn't find the problem. After a lot of research and reading messages HP, I finally understood that it was the problem with the BIOS Update and Windows 7. So, out of curiosity, I installed Linux RedHat 6 on windows 7 and everything was OK. But I am a graphic designer for Linux is not a good choice for me. I want to just restore my BIOS in its original version of the default BIOS. Please kindly help me to get my original BIOS. I tried everything on my hand. I also ask HP to the original versions of the drivers like BIOS on its Internet site. My laptop is dying. Please, Experts, I need your kind assisstence. Thanks in advance

  @AbdulRaheem25

  Create the key USB HP Diagnostics of material 3-in-1 PC and boot to it.

  If you updated the BIOS from the old version will still be in a folder of your operating system. Use the method I proposed to get it back.

  If you are unable to read the instructions on the web page of Diagnostics of material for the HP PC, then I suggest that you pay someone to do it and create the flash drive for you.

  We are here for our volunteer help and trying to direct members of the resolution of their problems, but if you want us to help you work with us. We (HP Experts) are not employees of HP, we are volunteers.

• Can I configure NISE with a switch of party - if the switch is not installed?

  I've never used NOR Switch before Executive - we hope to use it on a new project.

  We do not have equipment at the moment - we will use a Pickering 40-540-021 '132 x 4' switch.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? I get an error when I create the NI Switch Executive virtual device. Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  Here's what I've done so far:

  -Install the drivers of Pickering.

  -To the MAX (v5) I have setup a session driver IVI and logical name.

  When I try to create a new NI Switch Executive peripheral virtual, I add the logical name of the switch, click [next] and get the NISE error...

  "An error occurred so they were trying to access the devices PROJECTSWITCH. The primary error: unknown status code (Hex 0xBFFA400C).

  I see that a virtual device is created with no logical switch assigned. I get the error even if I try and add a logical switch manually to the virtual device NISE.

  Is it because the switch Board is not available for the system? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  Thank you

  Alan

  Alan.

  
  Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..

  This should be the expected behavior. NEITHER Switch Executive tries to communicate with the instrument before allowing you to configure routes to ensure that there is no problem that would affect the operation of the Switch Executive. In your case the pilot trying to communicate with a non-existent device.

  I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? Can I configure the routing/groups/exclusions without the device being mounted physically switch?

  It is possible that all compatible IVI devices should have the ability to simulate.

  It seems that you have configured your session of IVI driver incorrectly for a simulated device. I try and make sure that in the session driver, under the 'Général' tab, select the drop down menu to "Simulate with" and select 'Specific driver' and then click 'Save the IVI Configuration'. This will return the Pickering driver selected in the 'software' tab and simulate a device. This should allow you to create a virtual device NI Switch Executive and develop and test the code on the simulated instruments.

  I would like to know if you have any other questions.

• How to update the switchable graphics drivers and Dungeon 'switching' work?

  Hi guys,.

  I recently installed the new drivers by AMD (v.13.1) on my laptop HP Pavilion dv6-3060ej (Windows 7 64-bit), which uses the Intel HD Graphics and AMD Radeon HD5650 switchable graphics.

  The fact is that I met a few rendering problems on the latest 12.6 which supported my graphics and allowed soft switching between them. Version 13.1 solved my problems of rendering, but another question - it simply does not recognize my graphics card so that it installs only some of its features and leave the Catalyst Control Center features so I can't pass my graphics cards. I even tried to leave the latest CCC, but it comes with an error message.

  To summarize, my strongest Radeon HD5650 graphics card works well but I cannot switch to the Intel's HD to save the life of the battery.

  Any thoughts? Thanks a lot for your help

  Hello IBINATOR.  I appreciate that you try to upgrade your Radeon (with drivers AMD) graphics while keeping the switchable graphics in a working state.  Is this correct?

  This is workaround only to your question and you must have the game, Steam client, installed.  The HP driver for your graphics card contains a driver for the card from AMD, the Intel card and switchable graphics framework.  You can then use the game client, steam (through a partnership with AMD), to update the part switchable graphics system AMD while keeping graphics intact.

  1. Remove your current AMD drivers using this utility and restart your laptop.
  2. Download the latest version of the drivers from HP.  Here is a link.
  3. Install the driver and reboot again.
  4. Follow the steps in this thread to use steam to update the graphics driver.
  5. Restart one last time and check if the problem is resolved.

  Let me know the result.  In addition, have a wonderful day!

• The switch configuration of 6500 catalyst for IPS Inline the METHOD works

  I understand how to configure the switch Catalyst 6500 so that the monitoring of ports are access ports in two VLAN separate operation online.

  However, I don't see any document that describes how the desired VLAN traffic gets forced through the IPS.

  "Promiscuous" mode, you can use copy/capture VACL and forwards traffic wished the METHOD of analysis. I don't see how to get traffic desired through the IPS.

  Note that the 6500 host is running native SXE IOS 12.2 (18).

  Thanks for any help.

  A transparent firewall is a pretty good comparison.

  Say you have vlan 10 with 100 PCs and 1 router for the network.

  If you want to apply a transparent firewall on this vlan you can put not just the Firewall interface on vlan 10. Nothing would go through the firewall.

  Instead, you need to create a new vlan, say 1010. Now you place the Firewall interface on vlan 10 and the other on the vlan 1010. Nothing is still going through the firewall. So now move you that router from vlan 10 to vlan 1010. Everything you do is to change the vlan, IP address and the mask of the router remain the same.

  The firewall transparent bridge vlan 10 and vlan 1010. The SCP on the vlan 10 ae is able to communicate and through the router, but must go through the transparent firewall to do.

  The firewall is transparent because there no IP Route between 2 VLANS, instead, the same IP subnet is on the VLAN and the transparent firewall ensuring the beidges between the 2 VLANS.

  The transparent firewall can do firewall between the SCP on the vlan 10 and the router on vlan 1010. But PC has vlan 10 talks for PC B on vlan 10, then the transparent firewall does not see and cannot block this traffic.

  An InLine sensor is very similar to the transparent firewall and will fill between the 2 VLANS. And similarly an InLine sensor is able to monitor InLine between PCs traffic on vlan 10 and the router on vlan 1010, but will not be able to monitor the traffic between 2 PCs on vlan 10.

  Now the PC on the other vlan and the router on a virtual LAN is a classic deployment for the sensors online, but your VLAN need not be divided in this way. You can choose to place some servers in one vlan and desktop to another vlan. You subdivide them VLAN to whatever the logical method for your deployment.

  Now for the surveillance of several VLANs the same principle still applies. You can't control traffic between machines on the same vlan. So for each the VLAN that you want to analyze, you will need to create a new vlan and divide the machines between the 2 VLANS.

  In your case with Native IOS, you are limited to only 1 pair of VLAN for InLine followed, but your desired deployment would require 20 pairs of vlan.

  The IPS 5.1 software now has the ability to manage the 20 pairs, but the native IOS software doesn't have the ability to send the 40 VLAN (20 pairs) to the JOINT-2.

  Changes in native IOS are in testing right now, but I have not heard a release date for these changes.

  Now cat BONES has already made these changes. So here is a breakdown of basic of what you could do in the BONE of cat and you can use to prepare for a deployment native IOS when it came out.

  For VLAN 10-20 and 300-310, you want monitored, you will need to break each of those VLANs in VLAN 2.

  Let's say that keep us it simple and add 500 to each vlan in order to create the new VLAN for each pair.

  Therefore, the following pairs:

  10/510, 511/11, 12/512, etc...

  300/800, 801/301, 302/802, etc...

  You configure the port to probe trunk all 40 VLAN:

  set the trunk 5/7 10-20 300-310 510-520 800-810

  (And then clear all other vlans off this trunk to clean things up)

  In the configuration of JOINT-2 create the 20 pairs of vlan inline on interface GigabitEthernet0/7

  NW on each of VLAN original 20 leave the default router for each LAN virtual vlan original to the vlan 500 +.

  At this point, you should be good to go. The JOINT-2 will not track traffic that remains inside each of the 20 VLAN original, but would monitor the traffic is routed in and out of each of the 20 VLAN.

  Due to a bug of switch, you may need to have an extra PC moved to the same vlan as the router if the switch/MSFC is used as the router and that you deploy with a JOINT-2.

• Configure the switch to WAP

  I have a demonstration kit that includes a WLC 2106 and WAP 2 1252. I have configured the WLC correctly (I think) and the WAP 2 can contact the WLC when they are plugged directly into the WLC and I can connect my wireless laptop. I want to spend the WAP directly connected to the WLC to a core switch Cisco 3560 G. No one knows what port on the 3560 settings should do or where I can look. I have configured the switch ports:

  Interface GigabitEthernetX / X

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan 212,214,215,901

  switchport mode trunk

  but when I plug in it do not access the WLC.

  Happy, it was a simple problem to solve :)

• KVM access - needed to configure the switch upstream?

  I'm short on time, and I'll put up a UCS solution tomorrow for the first time. I have a feeling I'll have problems of access to the console KVM IP subnet.

  Do I need to configure the switch upstream so that the KVM access to the work of the management of VLANS? The subnet KVM stands by the management subnet. I could also set to the same subnet. What is practice here?

  KVM IP subnet must be in the same subnet as the management IP addresses you assign to each fabric interconnect. This is due to the KVM using the versus network ports the FEX upstream to FI ports.

  Hope this helped...

  Richard Pugh

• Configuration of the switch SGE2010P

  I am facing a problem during the installation of the switch SGE2010P with UC560. There are two switches in a SF300 and SGE2010P site. The SF300 works very well. But the SGE2010P switch is a problem. I connected the UC560 to the SF300 directly and connected SGE2010P to the SF300. In the two switches, all ports are trunk, not tagged vlan data and tag vlan voice. Switch SGE2010P is offline. Unfortunately, the phones don't work switch not which are connected to SGE2010P. Then I started shooting poorly, not marked all ports which phones are connected only to the voice vlan (vlan data excluded) and set the same ports to be the access port. Set the STP priority to zero. Now some phones work some are not. Can someone suggest what to do to fix this?

  Hi sham, by default the EMS classic switch short tree covering weight. This switch to RSTP. Secondly, you may need to manually set the fast port on all ports. Spanning interfaces of the tree then set the edge port on instead of auto.

  You said that all ports are given vlan not identified, voice vlan tagged, if that's the case, that your configuration of vlan is made. Assuming that the SF300 wearing exactly what you did on the EMS.

  In addition, you mentioned that the EMS is autonomous, check again please. If you use port 24 or 48 so that in the stacking mode, these ports do not work.

  -Tom
  Please mark replied messages useful

• What is the switch for automatic update of the Flash Player 11.2 on a silent install?

  This is for the installation of Flash Player silently(flash.exe-install). I'm looking for the switch that will activate the new installation automatically updated feature flash 11.2. I would like to deploy 11.2 flash with this feature enabled.

  In addition, adding the command line argument '-0 "will also allow the silent automatic update mechanism

• When I switch to v5.7 to 6.0 installation did not ask me if I wanted to update the catalog so I always use that Lightroom 5.  Is elsewhere or is it ok.  If it is bad how do I update the catalog for v6.0?  I use a Mac

  When I upgraded from lightroom 5.7 to 6.0 installation has not asked if I wanted to update the catalogue which is what I expected.  So I always use the version 5.  Is how important it?  If so how to I update to version 6.0?

  This happens sometimes. Just start Lightroom 6 go to file-> open and then locate your Lightroom 5.7 catalog and choose to open it. Then 6 Lightroom will do the upgrade.

• Having trouble getting the voice VLAN on the switch X1052P to work at all

  Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...

  Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.

  Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.

  I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.

  Network administration > VLAN > VLAN static

  Network administration > VLAN > Voice VLAN

  I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.

  This is the short story from where I am now. Any help is greatly appreciated.

  FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.

  After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.

  I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!

  SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.

  So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.

• Best practices of priority network traffic at the switch

  What is usually the best way to prioritize the specific traffic a VLAN specific?

  I work with the differentiated Services to match the traffic of a VLAN specific and assign a queue of 6 switch to give traffic a higher priority than normal traffic. But I'm not sure that with this configuration. I red on the priority of traffic from the switch but I didn't understand any of this I think.

  The police are certainly working. In the web interface, I see that are packages offered for the DiffServ, according to me, I'm missing something...

  Config:
  Policy-map {policy name} in
  class {class name}
  Assign-queue 6
  output
  interface port-channel 1
  service-policy in the {policy name}

  Just a brief update: I think that my setup works fine. I figured out that the ping response delay has more to do with the terminal and then with the configuration of the switch :)